dexter86 Posted July 30, 2014 Posted July 30, 2014 When I have mounted iso in OSFMount: 1. If I don't have any optical drive connected, then on ImgBurn startup it shows error Clicking on "Ponów próbę" ("Retry" in english) shows this again, clicking on "Anuluj" ("Cancel" in english) let's program startup and in log I have I 14:23:00 ImgBurn Version 2.5.8.0 started! I 14:23:00 Microsoft Windows 8 Core x64 Edition (6.2, Build 9200) I 14:23:00 Total Physical Memory: 16 744 348 KiB - Available: 14 324 820 KiB I 14:23:00 Initialising SPTI... I 14:23:00 Searching for SCSI / ATAPI devices... E 14:28:47 Device->Initialise() Failed! E 14:28:47 Device: [0:0:0] (J:) E 14:28:47 This drive will not be visible in the program. W 14:28:47 No devices detected! 2. If I have my LiteOn eTAU108 connected, no error is shown and program starts up, but OSFMount drive is not visible I 14:33:36 ImgBurn Version 2.5.8.0 started! I 14:33:36 Microsoft Windows 8 Core x64 Edition (6.2, Build 9200) I 14:33:36 Total Physical Memory: 16 744 348 KiB - Available: 14 226 836 KiB I 14:33:36 Initialising SPTI... I 14:33:36 Searching for SCSI / ATAPI devices... I 14:33:36 -> Drive 1 - Info: Slimtype eTAU108 1 EL46 (L:) (USB 2.0) I 14:33:36 Found 1 DVD±RW/RAM!
LIGHTNING UK! Posted July 30, 2014 Posted July 30, 2014 That's more down to their driver than ImgBurn. It must be reporting itself as a CDROM drive but then isn't processing the commands properly. If you want one that works properly, try Virtual CloneDrive. http://www.slysoft.com/en/virtual-clonedrive.html
dexter86 Posted July 30, 2014 Author Posted July 30, 2014 Ok, so I will report this to PassMark I don't really need this to "work", I just reported this because no one did.
Recommended Posts