Jump to content

Drive Stops Erasing at 95%

ectweak

By ectweak
in ImgBurn Support

 Share

Recommended Posts

ectweak ISF Newbie

ectweak

Posted
Posted (edited)

Hello,

 

I attempted to burn a BD-RE DL from TDK today (Model BEV50HCPWA3A). I performed the Full Erase that ImgBurn requires, however at 95%, it stalled, returning the following.

; //****************************************\\
;   ImgBurn Version 2.5.8.0 - Log
;   Friday, 15 August 2014, 18:46:55
; \\****************************************//
;
;
I 15:31:45 ImgBurn Version 2.5.8.0 started!
I 15:31:45 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1)
I 15:31:45 Total Physical Memory: 16,726,964 KiB  -  Available: 8,409,352 KiB
W 15:31:45 AnyDVD can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled!
I 15:31:45 Initialising SPTI...
I 15:31:45 Searching for SCSI / ATAPI devices...
I 15:31:46 -> Drive 1 - Info: HL-DT-ST BD-RE  BH08LS20 2.00-01 (D:) (SATA)
I 15:31:46 Found 1 BD-RE!
I 15:32:21 Operation Started!
I 15:32:21 Device: [0:0:0] HL-DT-ST BD-RE  BH08LS20 2.00 (D:) (SATA)
I 15:32:21 Media Type: BD-RE (Disc ID: TDKBLD-Wfa-000)
I 15:32:21 Media Supported Write Speeds: 2x
I 15:32:21 Quick Erase: No
I 15:32:21 Format Properly: Yes
I 15:32:21 Format Size: Preferred
I 15:32:21 Format With Full Certification: Yes
I 15:32:21 Format Without Spare Areas: Yes
I 15:32:21 Erasing Disc...
W 18:27:36 I/O Interface 'Debug Mode' has been Enabled!
I 18:27:37 [0:0:0] HL-DT-ST BD-RE  BH08LS20 2.00 (D:) (SATA)
I 18:27:37 CDB: 00 00 00 00 00 00
I 18:27:37 CDB Interpretation: Test Unit Ready
E 18:27:37 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B
E 18:27:37 SENSE SK Interpretation: Not Ready
E 18:27:37 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95%
I 18:27:38 [0:0:0] HL-DT-ST BD-RE  BH08LS20 2.00 (D:) (SATA)
I 18:27:39 CDB: 00 00 00 00 00 00
I 18:27:39 CDB Interpretation: Test Unit Ready
E 18:27:39 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B
E 18:27:39 SENSE SK Interpretation: Not Ready
E 18:27:39 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95%
I 18:27:40 [0:0:0] HL-DT-ST BD-RE  BH08LS20 2.00 (D:) (SATA)
I 18:27:40 CDB: 00 00 00 00 00 00
I 18:27:40 CDB Interpretation: Test Unit Ready
E 18:27:40 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B
E 18:27:40 SENSE SK Interpretation: Not Ready
E 18:27:40 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95%
I 18:27:41 [0:0:0] HL-DT-ST BD-RE  BH08LS20 2.00 (D:) (SATA)
I 18:27:41 CDB: 00 00 00 00 00 00
I 18:27:41 CDB Interpretation: Test Unit Ready
E 18:27:41 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B
E 18:27:41 SENSE SK Interpretation: Not Ready
E 18:27:41 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95%
I 18:27:42 [0:0:0] HL-DT-ST BD-RE  BH08LS20 2.00 (D:) (SATA)
I 18:27:42 CDB: 00 00 00 00 00 00
I 18:27:42 CDB Interpretation: Test Unit Ready
E 18:27:42 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B
E 18:27:42 SENSE SK Interpretation: Not Ready
E 18:27:42 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95%
I 18:27:43 [0:0:0] HL-DT-ST BD-RE  BH08LS20 2.00 (D:) (SATA)
I 18:27:43 CDB: 00 00 00 00 00 00
I 18:27:43 CDB Interpretation: Test Unit Ready
E 18:27:43 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B
E 18:27:43 SENSE SK Interpretation: Not Ready
E 18:27:43 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95%
I 18:27:44 [0:0:0] HL-DT-ST BD-RE  BH08LS20 2.00 (D:) (SATA)
I 18:27:44 CDB: 00 00 00 00 00 00
I 18:27:44 CDB Interpretation: Test Unit Ready
E 18:27:44 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B
E 18:27:44 SENSE SK Interpretation: Not Ready
E 18:27:44 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95%
I 18:27:45 [0:0:0] HL-DT-ST BD-RE  BH08LS20 2.00 (D:) (SATA)
I 18:27:45 CDB: 00 00 00 00 00 00
I 18:27:45 CDB Interpretation: Test Unit Ready
E 18:27:45 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B
E 18:27:45 SENSE SK Interpretation: Not Ready
E 18:27:45 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95%
I 18:27:46 [0:0:0] HL-DT-ST BD-RE  BH08LS20 2.00 (D:) (SATA)
I 18:27:46 CDB: 00 00 00 00 00 00
I 18:27:46 CDB Interpretation: Test Unit Ready
E 18:27:46 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B
E 18:27:46 SENSE SK Interpretation: Not Ready
E 18:27:46 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95%
I 18:27:47 [0:0:0] HL-DT-ST BD-RE  BH08LS20 2.00 (D:) (SATA)
I 18:27:47 CDB: 00 00 00 00 00 00
I 18:27:47 CDB Interpretation: Test Unit Ready
E 18:27:47 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B
E 18:27:47 SENSE SK Interpretation: Not Ready
E 18:27:47 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95%
I 18:27:48 [0:0:0] HL-DT-ST BD-RE  BH08LS20 2.00 (D:) (SATA)
I 18:27:48 CDB: 00 00 00 00 00 00
I 18:27:48 CDB Interpretation: Test Unit Ready
E 18:27:48 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B
E 18:27:48 SENSE SK Interpretation: Not Ready
E 18:27:48 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95%
I 18:27:49 [0:0:0] HL-DT-ST BD-RE  BH08LS20 2.00 (D:) (SATA)
I 18:27:49 CDB: 00 00 00 00 00 00
I 18:27:49 CDB Interpretation: Test Unit Ready
E 18:27:49 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B
E 18:27:49 SENSE SK Interpretation: Not Ready
E 18:27:49 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95%
I 18:27:50 [0:0:0] HL-DT-ST BD-RE  BH08LS20 2.00 (D:) (SATA)
I 18:27:50 CDB: 00 00 00 00 00 00
I 18:27:50 CDB Interpretation: Test Unit Ready
E 18:27:50 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B
E 18:27:50 SENSE SK Interpretation: Not Ready
E 18:27:50 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95%
I 18:27:51 [0:0:0] HL-DT-ST BD-RE  BH08LS20 2.00 (D:) (SATA)
I 18:27:51 CDB: 00 00 00 00 00 00
I 18:27:51 CDB Interpretation: Test Unit Ready
E 18:27:51 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B
E 18:27:51 SENSE SK Interpretation: Not Ready
E 18:27:51 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95%
I 18:27:52 [0:0:0] HL-DT-ST BD-RE  BH08LS20 2.00 (D:) (SATA)
I 18:27:52 CDB: 00 00 00 00 00 00
I 18:27:52 CDB Interpretation: Test Unit Ready
E 18:27:52 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B
E 18:27:52 SENSE SK Interpretation: Not Ready
E 18:27:52 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95%
I 18:27:53 [0:0:0] HL-DT-ST BD-RE  BH08LS20 2.00 (D:) (SATA)
I 18:27:53 CDB: 00 00 00 00 00 00
I 18:27:53 CDB Interpretation: Test Unit Ready
E 18:27:53 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B
E 18:27:53 SENSE SK Interpretation: Not Ready
E 18:27:53 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95%
I 18:27:54 [0:0:0] HL-DT-ST BD-RE  BH08LS20 2.00 (D:) (SATA)
I 18:27:54 CDB: 00 00 00 00 00 00
I 18:27:54 CDB Interpretation: Test Unit Ready
E 18:27:54 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B
E 18:27:54 SENSE SK Interpretation: Not Ready
E 18:27:54 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95%
I 18:27:55 [0:0:0] HL-DT-ST BD-RE  BH08LS20 2.00 (D:) (SATA)
I 18:27:55 CDB: 00 00 00 00 00 00
I 18:27:55 CDB Interpretation: Test Unit Ready
E 18:27:55 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B
E 18:27:55 SENSE SK Interpretation: Not Ready
E 18:27:55 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95%
I 18:27:56 [0:0:0] HL-DT-ST BD-RE  BH08LS20 2.00 (D:) (SATA)
I 18:27:56 CDB: 00 00 00 00 00 00
I 18:27:56 CDB Interpretation: Test Unit Ready
E 18:27:56 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B
E 18:27:56 SENSE SK Interpretation: Not Ready
E 18:27:56 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95%
I 18:27:57 [0:0:0] HL-DT-ST BD-RE  BH08LS20 2.00 (D:) (SATA)
I 18:27:57 CDB: 00 00 00 00 00 00
I 18:27:57 CDB Interpretation: Test Unit Ready
E 18:27:57 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B
E 18:27:57 SENSE SK Interpretation: Not Ready
E 18:27:57 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95%
I 18:27:58 [0:0:0] HL-DT-ST BD-RE  BH08LS20 2.00 (D:) (SATA)
I 18:27:58 CDB: 00 00 00 00 00 00
I 18:27:58 CDB Interpretation: Test Unit Ready
E 18:27:58 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B
E 18:27:58 SENSE SK Interpretation: Not Ready
E 18:27:58 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95%
I 18:27:59 [0:0:0] HL-DT-ST BD-RE  BH08LS20 2.00 (D:) (SATA)
I 18:27:59 CDB: 00 00 00 00 00 00
I 18:27:59 CDB Interpretation: Test Unit Ready
E 18:27:59 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B
E 18:27:59 SENSE SK Interpretation: Not Ready
E 18:27:59 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95%
I 18:28:00 [0:0:0] HL-DT-ST BD-RE  BH08LS20 2.00 (D:) (SATA)
I 18:28:00 CDB: 00 00 00 00 00 00
I 18:28:00 CDB Interpretation: Test Unit Ready
E 18:28:00 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B
E 18:28:00 SENSE SK Interpretation: Not Ready
E 18:28:00 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95%
I 18:28:01 [0:0:0] HL-DT-ST BD-RE  BH08LS20 2.00 (D:) (SATA)
I 18:28:01 CDB: 00 00 00 00 00 00
I 18:28:01 CDB Interpretation: Test Unit Ready
E 18:28:01 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B
E 18:28:01 SENSE SK Interpretation: Not Ready
E 18:28:01 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95%
W 18:28:02 I/O Interface 'Debug Mode' has been Disabled!
W 18:31:48 I/O Interface 'Debug Mode' has been Enabled!
I 18:31:48 [0:0:0] HL-DT-ST BD-RE  BH08LS20 2.00 (D:) (SATA)
I 18:31:48 CDB: 00 00 00 00 00 00
I 18:31:48 CDB Interpretation: Test Unit Ready
E 18:31:48 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B
E 18:31:48 SENSE SK Interpretation: Not Ready
E 18:31:48 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95%
I 18:31:49 [0:0:0] HL-DT-ST BD-RE  BH08LS20 2.00 (D:) (SATA)
I 18:31:49 CDB: 00 00 00 00 00 00
I 18:31:49 CDB Interpretation: Test Unit Ready
E 18:31:49 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B
E 18:31:49 SENSE SK Interpretation: Not Ready
E 18:31:49 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95%
I 18:31:50 [0:0:0] HL-DT-ST BD-RE  BH08LS20 2.00 (D:) (SATA)
I 18:31:51 CDB: 00 00 00 00 00 00
I 18:31:51 CDB Interpretation: Test Unit Ready
E 18:31:51 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B
E 18:31:51 SENSE SK Interpretation: Not Ready
E 18:31:51 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95%
I 18:31:52 [0:0:0] HL-DT-ST BD-RE  BH08LS20 2.00 (D:) (SATA)
I 18:31:52 CDB: 00 00 00 00 00 00
I 18:31:52 CDB Interpretation: Test Unit Ready
E 18:31:52 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 F3 9B
E 18:31:52 SENSE SK Interpretation: Not Ready
E 18:31:52 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 95%
W 18:31:52 I/O Interface 'Debug Mode' has been Disabled!

 
I restarted my PC, and am currently attempting to erase the disc again.
 
I have noticed that it returns 
 

I 19:33:44 [0:0:0] HL-DT-ST BD-RE  BH08LS20 2.00 (D:) (SATA)
I 19:33:44 CDB: 00 00 00 00 00 00
I 19:33:44 CDB Interpretation: Test Unit Ready
E 19:33:44 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 D0 04 04 00 80 1F 5D
E 19:33:44 SENSE SK Interpretation: Not Ready
E 19:33:44 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 12%

 
but continues to increase in percentage of completion.
am I just being impatient at the 95% hang, or is there something else that may be going on?
 
Edit: Information from the "Write" screen of Imgburn
 

HL-DT-ST BD-RE  BH08LS20 2.00 (SATA)
Current Profile: BD-RE
 
Disc Information:
Status: Empty
State of Last Session: Empty
Erasable: Yes
MID: TDKBLD-Wfa-000
Supported Write Speeds: 2x
 
BD Disc Information (L0):
Disc ID: TDKBLD-Wfa-000
Disc Type: BD-RE
Disc Size: 120 mm
Disc Class: 0
Disc Version: 2
Number of Layers: 2
Layer Type: Rewritable
DVD Layer Present: No
CD Layer Present: No
Channel Bit Length: 74.50 nm (25 GB Per Layer)
BCA Present: Yes
Maximum Transfer Rate: Not Specified
First PAA of Data Zone: 131,072
Last PAA of Data Zone: 1,658,494
 
BD Disc Information (L1):
Disc ID: TDKBLD-Wfa-000
Disc Type: BD-RE
Disc Size: 120 mm
Disc Class: 0
Disc Version: 2
Number of Layers: 2
Layer Type: Rewritable
DVD Layer Present: No
CD Layer Present: No
Channel Bit Length: 74.50 nm (25 GB Per Layer)
BCA Present: Yes
Maximum Transfer Rate: Not Specified
First PAA of Data Zone: 2,535,808
Last PAA of Data Zone: 4,063,230
 
Format Capacities:
DT: 0x01 - NB: 24438784 (0x0174E800) - TDP: 36864
FT: 0x00 - NB: 23652352 (0x0168E800) - TDP: 24576
FT: 0x01 - NB: 23259136 (0x0162E800) - TDP: 2048
FT: 0x30 - NB: 23652352 (0x0168E800) - TDP: 24576
FT: 0x30 - NB: 23259136 (0x0162E800) - TDP: 36864
FT: 0x30 - NB: 24307712 (0x0172E800) - TDP: 4096
FT: 0x31 - NB: 24438784 (0x0174E800) - TDP: 2048
 
Performance (Write Speed):
Descriptor 1...
-> B0: 0x02, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 24438783 (0x0174E7FF)
-> RS: 8,928 KB/s (2x) - WS: 8,991 KB/s (2x)

 
Family Tree Information

I 23:41:53 Family Tree:
I 23:41:53 -> ACPI x64-based PC
I 23:41:53 -> Microsoft ACPI-Compliant System
I 23:41:53 -> PCI bus
I 23:41:53 -> Intel(R) 7 Series/C216 Chipset Family SATA AHCI Controller - 1E02 (VEN_8086&DEV_1E02 - Intel - msahci - v9.3.0.1011)
I 23:41:53 -> IDE Channel (ATA Channel 1)
I 23:41:53 -> CD-ROM Drive (HL-DT-ST BD-RE  BH08LS20 ATA Device) (Channel 1, Target 0, Lun 0)

 
Edit 2: Hmm, I just noticed there was a firmware checker built into ImgBurn... and here I am thinking the one on LG's website was the newest... attempting that now
Edited by ectweak
LIGHTNING UK! ISF God

LIGHTNING UK!

Posted
Posted

The drive is in complete control when doing that stage of the erase and it returns the % complete values.

 

If it's getting stuck, it must be having an issue with the disc you're using.

 

The firmware update may help... or it may not.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept