Jon300 Posted October 5, 2006 Posted October 5, 2006 hey new to this program but i have a quick question I dont know whether this is a bug or just my drive, but when i select a slower burn speed like 1 - 2x (which is why i chose this program) when the burn actually starts it burns at 6x, this is probably my drives lowest speed but i am asking to make sure as my dvd's skip when they are played in a dvd player because they are burnt too fast. I have a light-on DL-DVD burner Thanks for any help that you can provide.
lfcrule1972 Posted October 5, 2006 Posted October 5, 2006 To check this we will need you to copy/paste an ImgBurn log here for us. The first thing that will do is confirm the rated write speeds of the media you are using - it may be that 1x or 2x is not supported on those discs, therefore the drive will use the minimum that is supported. The second thing the log will tell us is what dye is on the media you are using. Typically skipping and poor playback is the result of crap media. Your log will be able to confirm this to us - for instance your discs might be using CMC MAG dye which is probably one of the worst available and could certainly cause the playback problems you mention.
Jon300 Posted October 6, 2006 Author Posted October 6, 2006 (edited) Tanks for the heads up to see where to read on the log, its the disk that only supports 6 and 8x burning However the log is as follows Disc Information: Status: Empty Erasable: No Free Sectors: 2,295,104 Free Space: 4,700,372,992 bytes Free Time: 510:03:29 (MM:SS:FF) Supported Write Speeds: 6x, 8x Physical Format Information (ADIP): Disc ID: YUDEN000-T02-00 Book Type: DVD+R Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 2,491,711 Last Physical Sector in Layer 0: 0 Physical Format Information (Last Recorded): Disc ID: YUDEN000-T02-00 Book Type: DVD+R Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 2,491,711 Last Physical Sector in Layer 0: 0 looks like i need better dvd's Thanks again Edited October 6, 2006 by Jon300
polopony Posted October 6, 2006 Posted October 6, 2006 Taiyo Yuden discs are at the top of the heap along with Verbatim so media is not your problem.What you posted is not the log from IMGburn .the log would have looked like this I 01:06:41 ImgBurn Version 2.1.0.0 started! I 01:06:41 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 1) I 01:06:41 Initialising SPTI... I 01:06:41 Searching for SCSI / ATAPI devices... I 01:06:41 Found 2 DVD-ROMs and 1 DVD?RW! then after you burned something there would be heaps of info for us . You should start with a firmware update for starters in IMGburn right click your drive and from the menu scroll down to where it says "check for Firmware Updates" click on that and then follow the prompts
lfcrule1972 Posted October 6, 2006 Posted October 6, 2006 I agree with polo - Taiyo Yuden dye is one of the best there is alongside Verbatim dye. You really should have no problems burning those at 8x so I wonder what is causing the skipping on your player. I assume the burns all pass verify on ImgBurn ?
blutach Posted October 6, 2006 Posted October 6, 2006 No adhesive label on the disk is there? Regards
Jon300 Posted October 11, 2006 Author Posted October 11, 2006 (edited) OK i have update the firmware, and verification went through perfectley, i have been able to check the disk in my dvd player but only shortley and it did the same thing here is the log that you asked for here is the log I 09:55:44 ImgBurn Version 2.1.0.0 started! I 09:55:44 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 09:55:44 Initialising SPTI... I 09:55:44 Searching for SCSI / ATAPI devices... I 09:55:44 Found 1 DVD?RW! I 09:55:53 Operation Started! I 09:55:53 Source File: G:\shrink\Evergrey - A Night To Remember\Disk One - Concert\DISK_ONE___CONCERT.ISO I 09:55:53 Source File Sectors: 2,285,848 (MODE1/2048) I 09:55:53 Source File Size: 4,681,416,704 bytes I 09:55:53 Source File Volume Identifier: DISK_ONE___CONCERT I 09:55:53 Source File Implementation Identifier: DVD Shrink I 09:55:53 Source File File System(s): ISO9660, UDF (1.02) I 09:55:53 Destination Device: [1:2:0] LITE-ON DVDRW SOHW-1693S KS0B (E:) (ATA) I 09:55:53 Destination Media Type: DVD+R (Disc ID: YUDEN000-T02-00) (Speeds: 6x, 8x) I 09:55:53 Destination Media Sectors: 2,295,104 I 09:55:53 Write Mode: DVD I 09:55:53 Write Type: DAO I 09:55:53 Write Speed: 1x I 09:55:53 Link Size: Auto I 09:55:53 Test Mode: No I 09:55:53 BURN-Proof: Enabled I 09:55:54 Filling Buffer... I 09:55:54 Writing LeadIn... I 09:56:43 Writing Image... I 10:05:59 Synchronising Cache... I 10:06:00 Closing Track... I 10:06:05 Finalising Disc... I 10:06:27 Image MD5: 2289cf022bb44fa58da5d88810bc37a9 I 10:06:27 Operation Successfully Completed! - Duration: 00:10:33 I 10:06:27 Average Write Rate: 8,222 KB/s (5.9x) - Maximum Write Rate: 8,533 KB/s (6.2x) I 10:06:27 Cycling Tray before Verify... W 10:06:35 Waiting for device to become ready... I 10:06:48 Device Ready! I 10:06:48 Operation Started! I 10:06:48 Source Device: [1:2:0] LITE-ON DVDRW SOHW-1693S KS0B (E:) (ATA) I 10:06:48 Source Media Type: DVD+R (Book Type: DVD+R) (Disc ID: YUDEN000-T02-00) (Speeds: 6x, 8x) I 10:06:48 Image File: G:\shrink\Evergrey - A Night To Remember\Disk One - Concert\DISK_ONE___CONCERT.ISO I 10:06:48 Image File Sectors: 2,285,848 (MODE1/2048) I 10:06:48 Image File Size: 4,681,416,704 bytes I 10:06:48 Image File Volume Identifier: DISK_ONE___CONCERT I 10:06:48 Image File Implementation Identifier: DVD Shrink I 10:06:48 Image File File System(s): ISO9660, UDF (1.02) I 10:06:48 Verifying Sectors... I 10:16:31 Device MD5: 2289cf022bb44fa58da5d88810bc37a9 I 10:16:31 Device (Padded) MD5: d48a374fff79c6574be3b4b97ef4c3e8 I 10:16:31 Image MD5: 2289cf022bb44fa58da5d88810bc37a9 I 10:16:34 Operation Successfully Completed! - Duration: 00:09:43 I 10:16:34 Average Verify Rate: 7,841 KB/s (5.7x) - Maximum Verify Rate: 11,421 KB/s (8.2x) with all this extra input i am trying to make my dvd player region free, should be fun Thanks again for all the help Edited October 12, 2006 by Jon300
Recommended Posts