lh18 Posted September 15, 2014 Posted September 15, 2014 Hello everyone, I recently bought the Optiarch 5280S drive which burns XGD3 games straight out of the box and with default settings on ImgBurn. I successfully burned over five games over a one month time span. All games were burned on Verbatim 2.4X MKM-001-00 DL discs. On my latest burn I got the following message: I 20:45:54 ImgBurn Version 2.5.8.0 started! I 20:45:54 Microsoft Windows 7 Ultimate Edition (6.1, Build 7601 : Service Pack 1) I 20:45:54 Total Physical Memory: 3,407,096 KiB - Available: 1,749,244 KiB W 20:45:54 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 20:45:54 Initialising SPTI... I 20:45:54 Searching for SCSI / ATAPI devices... I 20:45:55 -> Drive 1 - Info: ATAPI iHAS224 A ZL0P (D:) (ATA) I 20:45:55 -> Drive 2 - Info: Optiarc DVD RW AD-5280S 1.Z8 (G:) (ATA) I 20:45:55 Found 1 DVD±RW and 1 DVD±RW/RAM! I 20:47:38 Operation Started! I 20:47:38 Source File: J:\XBOX 360\The Elder Scrolls V Skyrim [MULTI][XBOX360][Region Free][XGD3][P2P][WwW.GamesTorrents.CoM]\p2p-skrym\p2p-skrym\Skyrim.dvd I 20:47:38 Source File Sectors: 4,267,015 (MODE1/2048) I 20:47:38 Source File Size: 8,738,846,720 bytes I 20:47:38 Source File Volume Identifier: DVD_ROM I 20:47:38 Source File Volume Set Identifier: 90bd4000MS UDFBridge I 20:47:38 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 20:47:38 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 20:47:38 Source File File System(s): ISO9660, UDF (1.50) I 20:47:38 Destination Device: [2:0:0] Optiarc DVD RW AD-5280S 1.Z8 (G:) (ATA) I 20:47:38 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) I 20:47:38 Destination Media Supported Write Speeds: 2.4x I 20:47:38 Destination Media Sectors: 4,267,040 I 20:47:38 Destination Media L0 Data Zone Capacity: 2,133,520 (Changeable: Yes) I 20:47:38 Write Mode: DVD I 20:47:38 Write Type: DAO I 20:47:38 Write Speed: 2.4x I 20:47:38 DVD+R DL Reserve Track: No I 20:47:38 Link Size: Auto I 20:47:38 Lock Volume: Yes I 20:47:38 Test Mode: No I 20:47:38 OPC: No I 20:47:38 BURN-Proof: Enabled I 20:47:38 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x) I 20:47:38 Book Type Setting: DVD-ROM I 20:47:38 Optimal L0 Data Zone Capacity: 2,133,520 I 20:47:38 Optimal L0 Data Zone Method: Copied From Original Disc I 20:47:45 Set L0 Data Zone Capacity Succeeded! I 20:47:45 L0 Data Zone Capacity - Effective: 2,133,520 I 20:47:47 Filling Buffer... (80 MiB) I 20:47:50 Writing LeadIn... I 20:47:53 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014) I 20:47:54 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014) I 20:47:54 Writing Layer 0... (LBA: 0 - 2133519) I 21:10:10 Writing Layer 1... (LBA: 2133520 - 4267014) I 21:32:35 Synchronising Cache... I 21:32:36 Closing Track... W 21:32:49 Potential 'WaitImmediateIO' Deferred Error - (99%, 0/3) - Power On, Reset, or Bus Device Reset Occurred W 21:32:49 Close Track Failed! - Reason: Power On, Reset, or Bus Device Reset Occurred W 21:32:49 Retrying (1 of 3)... W 21:32:49 Retry Failed - Reason: Logical Unit is in process of becoming ready - 0% W 21:32:49 Retrying (2 of 3)... W 21:32:49 Retry Failed - Reason: Logical Unit is in process of becoming ready - 0% W 21:32:49 Retrying (3 of 3)... W 21:32:49 Retry Failed - Reason: Logical Unit is in process of becoming ready - 0% W 21:35:04 Retrying (4)... W 21:35:04 Retry Failed - Reason: Power On, Reset, or Bus Device Reset Occurred W 21:35:05 Retrying (5)... W 21:35:06 Retry Failed - Reason: Logical Unit is in process of becoming ready - 17% W 21:35:11 Retrying (6)... W 21:35:11 Retry Failed - Reason: Logical Unit is in process of becoming ready - 35% W 21:35:11 Retrying (7)... W 21:35:11 Retry Failed - Reason: Logical Unit is in process of becoming ready - 37% W 21:35:12 Retrying (8)... W 21:35:12 Retry Failed - Reason: Logical Unit is in process of becoming ready - 39% W 21:35:13 Retrying (9)... W 21:35:13 Retry Failed - Reason: Power On, Reset, or Bus Device Reset Occurred W 21:35:17 Retrying (10)... W 21:35:17 Retry Failed - Reason: Logical Unit is in process of becoming ready - 12% W 21:35:18 Retrying (11)... W 21:35:19 Retry Failed - Reason: Logical Unit is in process of becoming ready - 18% I 21:35:21 Finalising Disc... W 21:35:21 Finalise Disc Failed! - Reason: Logical Unit is in process of becoming ready - 25% W 21:35:21 Retrying (1 of 3)... W 21:35:21 Retry Failed - Reason: Logical Unit is in process of becoming ready - 25% W 21:35:21 Retrying (2 of 3)... W 21:35:21 Retry Failed - Reason: Logical Unit is in process of becoming ready - 25% W 21:35:21 Retrying (3 of 3)... W 21:35:21 Retry Failed - Reason: Logical Unit is in process of becoming ready - 25% I 21:36:23 Exporting Graph Data... I 21:36:23 Graph Data File: C:\Users\LH\AppData\Roaming\ImgBurn\Graph Data Files\Optiarc_DVD_RW_AD-5280S_1.Z8_THURSDAY-SEPTEMBER-11-2014_8-47_PM_MKM-001-00_2.4x.ibg I 21:36:23 Export Successfully Completed! I 21:36:23 Operation Successfully Completed! - Duration: 00:47:43 I 21:36:23 Average Write Rate: 3,183 KiB/s (2.4x) - Maximum Write Rate: 3,276 KiB/s (2.4x) - This has now cost me 4 failed burns on the same discs I was utlizing on my successful burns. When I try and run the games on the console I get an Unreadable Disc message. Can someone please help me figure out what is wrong with my burns? Thank you for your time! -
LIGHTNING UK! Posted September 15, 2014 Posted September 15, 2014 What controller is the drive attached to? Right click the drive drop down box and select 'family tree'. Close the box that comes up and then copy + paste everything from the log windows please.
lh18 Posted September 16, 2014 Author Posted September 16, 2014 Hello, Please see below for the log. Thanks for helping out! I appreciate your time. I 19:44:38 ImgBurn Version 2.5.8.0 started!I 19:44:38 Microsoft Windows 7 Ultimate Edition (6.1, Build 7601 : Service Pack 1)I 19:44:38 Total Physical Memory: 3,407,096 KiB - Available: 1,715,660 KiBW 19:44:38 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.I 19:44:38 Initialising SPTI...I 19:44:38 Searching for SCSI / ATAPI devices...I 19:44:39 -> Drive 1 - Info: ATAPI iHAS224 A ZL0P (D:) (ATA)I 19:44:39 -> Drive 2 - Info: Optiarc DVD RW AD-5280S 1.Z8 (G:) (ATA)I 19:44:39 Found 1 DVD±RW and 1 DVD±RW/RAM!I 19:44:47 Device: [2:0:0] Optiarc DVD RW AD-5280S 1.Z8 (G:) (ATA)I 19:44:47 Family Tree:I 19:44:47 -> ACPI x86-based PCI 19:44:47 -> Microsoft ACPI-Compliant SystemI 19:44:47 -> AMD PCI Express (3GIO) Filter DriverI 19:44:47 -> Standard Dual Channel PCI IDE Controller (VEN_1002&DEV_439C - ATI - pciide - v6.1.7601.18231)I 19:44:47 -> IDE Channel (ATA Channel 0)I 19:44:47 -> CD-ROM Drive (Optiarc DVD RW AD-5280S ATA Device) (Channel 0, Target 0, Lun 0)
LIGHTNING UK! Posted September 16, 2014 Posted September 16, 2014 See if you can put the controller in ahci mode and/or install some newer ati/amd drivers for it.
lh18 Posted September 17, 2014 Author Posted September 17, 2014 Is it currently in ATI mode? How do I put the controller n ahci mode? Thanks for the feedback.
lh18 Posted September 19, 2014 Author Posted September 19, 2014 Just what the doctor recommended. Your recommendation was a success. I burned one DL DVD and everything went great once again. I will keep everyone updated if any problems arise. This may help others with similar problems. Thanks a bunch!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now