Can't burn DVD DL image with Booktype DVD-Rom, can I?

[mFuSE]

Hello,

 

 

I'm trying to burn an DVD-DL image to a Verbatim DVD+DL disk.

I have 3 devices (BH16NS40 1.03-A0, SH-B123L SB04, AD-7640S HD18), only with the Optiarc DVD+-RW AD-7640S i can change the book type at all ...

 

But I'm not sure .. is the burned disk really in the format DVD-Rom?

I'm not sure how to interpret the following status window after the burn was complete:

Optiarc DVD+-RW AD-7640S HD18 (SATA)Current Profile: DVD+R DL


Disc Information:
Status: Complete
State of Last Session: Complete
Erasable: No
Sessions: 1
Sectors: 2.851.120
Size: 5.839.093.760 bytes
Time: 633:36:70 (MM:SS:FF)
MID: MKM-003-00
Supported Write Speeds: 2,4x; 4x


DVD±R DL Boundary Information:
L0 Data Zone Capacity: 1.425.568
Changeable: No


TOC Information:
Session 1... (LBA: 0)
-> Track 01  (Mode 1, LBA: 0 - 2851119)
-> LeadOut  (LBA: 2851120)


Disc Control Blocks Information:
Optiarc


Physical Format Information (ADIP - L0):
Disc ID: MKM-003-00
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120 mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196.608
Last Physical Sector of Data Area: 16.580.607
Last Physical Sector in Layer 0: 2.283.519


Physical Format Information (ADIP - L1):
Disc ID: MKM-003-00
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120 mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196.608
Last Physical Sector of Data Area: 16.580.607
Last Physical Sector in Layer 0: 2.283.519


Physical Format Information (Last Recorded - L0):
Disc ID: MKM-003-00
Book Type: DVD-ROM
Part Version: 1
Disc Size: 120 mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196.608
Last Physical Sector of Data Area: 16.580.591
Last Physical Sector in Layer 0: 1.622.175


Physical Format Information (Last Recorded - L1):
Disc ID: MKM-003-00
Book Type: DVD-ROM
Part Version: 1
Disc Size: 120 mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196.608
Last Physical Sector of Data Area: 16.580.591
Last Physical Sector in Layer 0: 1.622.175


Layer Information:
Layer 0 Sectors: 1.425.568 (50%)
Layer 1 Sectors: 1.425.552 (50%)


Performance (Write Speed):
Descriptor 1...
-> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00
-> EL: 2851119 (0x002B812F)
-> RS: 3.462 KB/s (2,5x) - WS: 3.324 KB/s (2,4x)
Descriptor 2...
-> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00
-> EL: 2851119 (0x002B812F)

-> RS: 3.462 KB/s (2,5x) - WS: 5.540 KB/s (4x)

May I have to try a different burner? ... But which one? :-(

This disc is still not accepted by my application as a valid disc

 

[LIGHTNING UK!]

'Physical format information - last recorded' is the one to look at, and that says 'book type: dvdrom'.

[mFuSE]

hello,

 

 

thank you, so it's an image/reader problem and not with imageburn :-)

[mFuSE]

Found the problem:

 

I disassembled my whole unit (RNS 510, just in case anybody get the same problem) - disassembled the CD/DVD drive also - and cleaned the lens with "Hama CD/DVD cleaning spray" .... eh voila! ... It's working ....

 

So an error can also be just a dirty reading unit ... and searching for an burn error can drive you crazy... especially when there is none ...