andreaandrea Posted November 19, 2014 Posted November 19, 2014 Hi,I burned a program on a dvd but at the end of the process ImgBurn froze on "99% - Syncronising Cache".The status bar were: Complete 100%, Buffer 0%, Device Buffer 0% but on the bottom of the program there was the syncronising cache at 99%. I waited for about 10 minutes but nothing happened. For this reason I had to cut it off with the task manager.If I launch the Verify disc, ImgBurn shows "Operation Successfully Completed!"... so now can I be sure that the burning process has been successful? Or shall I to repeat the burning process over again?Here's the log: I 09:12:51 ImgBurn Version 2.5.8.0 started!I 09:12:51 Microsoft Windows 7 Professional x64 Edition (6.1, Build 7601 : Service Pack 1)I 09:12:51 Total Physical Memory: 4.193.396 KiB - Available: 3.082.876 KiBW 09:12:51 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.I 09:12:51 Initialising SPTI...I 09:12:51 Searching for SCSI / ATAPI devices...I 09:12:54 -> Drive 1 - Info: TSSTcorp CDDVDW TS-L633A AS00 (E:) (ATAPI)I 09:12:54 -> Drive 2 - Info: RAHYZC FKDMZG12 3.5Z (F:) (SCSI)I 09:12:54 Found 1 DVD±RW/RAM and 1 BD-ROM!I 09:13:33 Operation Started!I 09:13:33 Source File: C:\Users\Luca\Desktop\Visual 6.0 Enterprise Edition.isoI 09:13:33 Source File Sectors: 315.729 (MODE1/2048)I 09:13:33 Source File Size: 646.612.992 bytesI 09:13:33 Source File Volume Identifier: Visual 6.0I 09:13:33 Source File Application Identifier: Nero - Burning ROMI 09:13:33 Source File File System(s): ISO9660; JolietI 09:13:33 Destination Device: [0:1:0] TSSTcorp CDDVDW TS-L633A AS00 (E:) (ATAPI)I 09:13:33 Destination Media Type: CD-R (Disc ID: 97m17s06f, Moser Baer India)I 09:13:33 Destination Media Supported Write Speeds: 10x; 16x; 20x; 24xI 09:13:34 Destination Media Sectors: 359.847I 09:13:34 Write Mode: CDI 09:13:34 Write Type: SAOI 09:13:34 Write Speed: 10xI 09:13:34 Lock Volume: YesI 09:13:34 Test Mode: NoI 09:13:34 OPC: NoI 09:13:34 BURN-Proof: EnabledI 09:13:34 Write Speed Successfully Set! - Effective: 1.764 KB/s (10x)I 09:13:36 Filling Buffer... (80 MiB)I 09:13:37 Writing LeadIn...I 09:14:02 Writing Session 1 of 1... (1 Track, LBA: 0 - 315728)I 09:14:02 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 315728)I 09:20:58 Synchronising Cache...W 09:25:39 I/O Interface 'Debug Mode' has been Enabled!I 09:25:39 [0:1:0] TSSTcorp CDDVDW TS-L633A AS00 (E:) (ATAPI)I 09:25:39 CDB: 00 00 00 00 00 00I 09:25:39 CDB Interpretation: Test Unit ReadyE 09:25:39 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 00 04 08 00 80 FF FFE 09:25:39 SENSE SK Interpretation: Not ReadyE 09:25:39 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Long Write in progress - 99%I 09:25:40 [0:1:0] TSSTcorp CDDVDW TS-L633A AS00 (E:) (ATAPI)I 09:25:40 CDB: 00 00 00 00 00 00I 09:25:40 CDB Interpretation: Test Unit ReadyE 09:25:40 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 00 04 08 00 80 FF FFE 09:25:41 SENSE SK Interpretation: Not ReadyE 09:25:41 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Long Write in progress - 99%I 09:25:42 [0:1:0] TSSTcorp CDDVDW TS-L633A AS00 (E:) (ATAPI)I 09:25:42 CDB: 00 00 00 00 00 00I 09:25:42 CDB Interpretation: Test Unit ReadyE 09:25:42 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 00 04 08 00 80 FF FFE 09:25:42 SENSE SK Interpretation: Not ReadyE 09:25:42 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Long Write in progress - 99%W 09:25:42 I/O Interface 'Debug Mode' has been Disabled!
LIGHTNING UK! Posted November 19, 2014 Posted November 19, 2014 ImgBurn hasn't frozen, it's just waiting for that task to complete. It's polling your drive every second to find out if it has. So either your drive got stuck or your Sata controller drivers are messing things up and saying things are still in progress when they aren't - i.e. not forwarding on the true response from the drive. If verification passed, the data side of things is fine (present and correct). When burns fail to finish nicely, it sometimes means the disc won't be recognised in some drives though. Just bare that in mind.
andreaandrea Posted November 19, 2014 Author Posted November 19, 2014 Ok, so it is just a visual error and the burning is fine. Anyway if the verification passed and I can be sure that the data on my disc is fine, I can safely ignore this error and I can keep burning. Am I right?
LIGHTNING UK! Posted November 19, 2014 Posted November 19, 2014 That's not exactly the conclusion I come to when reading my last reply. I'd burn it again until it completes without having to terminate the process... fixing drivers / the OS as I go until it works.... but maybe that's just me?
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now