Jump to content

Recommended Posts

Posted

Hello,

 

 I replace my computer and now Imgburn failed while burning xbox games backups.

DVD burnded successful, but when I run test with kprobe2 in the middle pif jumps to 81.

Meybe somethere is settings for Imgburn ? now I try with default settings. Liteon ihas 124.

Do not have log's. 

 

Thank You !

Posted

If you don't have logs, make new ones.

 

The default settings work fine. You just adjust your drive settings as per ImgBurn's recommendation - and of course be sure to use the recommended discs.

Posted

Ok I will try later, but what do you mean ImgBurn's recommendation ? Where I can find recommendation for Liteon IHAS 124b ? do you mean Force Hyper Tuning, SmartBurn, buffer size and another settings ?

Posted

Yes, I mean the hypertuning stuff. The program checks how you've configured the drive and will make suggestions if it deems necessary. Just make sure you're using v2.5.8.0.

Posted

I Enable: Force Hyper Tuning, Online Hyper Tuning, Overspeed, SmartBurn, clear 'OPC Data'.

When in settings I check Perform OPC, uncheck Burn-proof and set Buffer size to 1024mb.

 

After changed settings I powercycle dvd rom and before burn Imgburn send message (screen number 1), but I do not change It.

 

And result is not good, I attached logs.

 

 
; //****************************************\\
;   ImgBurn Version 2.5.8.0 - Log
;   antradienis, 16 gruodis 2014, 21:53:40
; \\****************************************//
;
;
I 21:24:05 ImgBurn Version 2.5.8.0 started!
I 21:24:05 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1)
I 21:24:05 Total Physical Memory: 4.099.868 KiB  -  Available: 2.533.612 KiB
I 21:24:05 Initialising SPTI...
I 21:24:05 Searching for SCSI / ATAPI devices...
I 21:24:05 -> Drive 1 - Info: DTSOFT BDROM 1.05 (E:) (Virtual)
I 21:24:05 -> Drive 2 - Info: ATAPI iHAS124   B AL0S (F:) (USB 2.0)
I 21:24:05 Found 1 DVD±RW/RAM and 1 BD-ROM!
I 21:25:11 Operation Started!
I 21:25:11 Source File: D:\Xbox 360\NBA.2K15.XBOX360-iMARS\imars.nba2k15.360\imars.nba15.360.dvd
I 21:25:11 Source File Sectors: 4.267.015 (MODE1/2048)
I 21:25:11 Source File Size: 8.738.846.720 bytes
I 21:25:11 Source File Volume Identifier: DVD_ROM
I 21:25:11 Source File Volume Set Identifier: af5f0000MS UDFBridge
I 21:25:11 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 21:25:11 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 21:25:11 Source File File System(s): ISO9660; UDF (1.50)
I 21:25:11 Destination Device: [0:0:0] ATAPI iHAS124   B AL0S (F:) (USB)
I 21:25:11 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00)
I 21:25:11 Destination Media Supported Write Speeds: 2,4x; 4x; 6x; 8x; 12x; 16x
I 21:25:11 Destination Media Sectors: 4.267.040
I 21:25:11 Destination Media L0 Data Zone Capacity: 2.133.520 (Changeable: Yes)
I 21:25:11 Write Mode: DVD
I 21:25:11 Write Type: DAO
I 21:25:11 Write Speed: 4x
I 21:25:11 DVD+R DL Reserve Track: No
I 21:25:11 Link Size: Auto
I 21:25:11 Lock Volume: Yes
I 21:25:11 Test Mode: No
I 21:25:11 OPC: Yes
I 21:25:11 BURN-Proof: Disabled
I 21:25:11 Write Speed Successfully Set! - Effective: 5.540 KB/s (4x)
I 21:25:11 Book Type Setting: DVD-ROM
I 21:25:11 Advanced Settings - Force HT: Yes, Online HT: Yes, OverSpeed: Yes, SmartBurn: Yes
I 21:25:11 CD/DVD Life Record Count: 36 - CD/DVD Record Count: 11
I 21:25:41 Optimal L0 Data Zone Capacity: 2.133.520
I 21:25:41 Optimal L0 Data Zone Method: Copied From Original Disc
W 21:25:41 Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in Parameter List
I 21:25:41 L0 Data Zone Capacity - Effective: 2.133.520
I 21:25:42 Filling Buffer... (1024 MiB)
I 21:25:54 Writing LeadIn...
I 21:25:57 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014)
I 21:25:57 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)
I 21:25:57 Writing Layer 0... (LBA: 0 - 2133519)
I 21:39:08 Writing Layer 1... (LBA: 2133520 - 4267014)
I 21:52:32 Synchronising Cache...
I 21:52:44 Closing Track...
I 21:52:45 Finalising Disc...
I 21:53:19 Exporting Graph Data...
I 21:53:19 Graph Data File: C:\Users\Vytenis\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS124_B_AL0S_2014-M-GRUODIS-16-D-_21-25_MKM-003-00_4x.ibg
I 21:53:19 Export Successfully Completed!
I 21:53:19 Operation Successfully Completed! - Duration: 00:28:07
I 21:53:19 Average Write Rate: 5.350 KiB/s (4.0x) - Maximum Write Rate: 5.515 KiB/s (4.1x)
I 21:53:40 Close Request Acknowledged
I 21:53:40 Closing Down...
I 21:53:40 Shutting down SPTI...
I 21:53:40 ImgBurn closed!
;
;
; //****************************************\\
;   ImgBurn Version 2.5.8.0 - Log
;   antradienis, 16 gruodis 2014, 20:43:31
; \\****************************************//
;
;
I 20:37:28 ImgBurn Version 2.5.8.0 started!
I 20:37:28 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1)
I 20:37:28 Total Physical Memory: 4.099.868 KiB  -  Available: 1.828.660 KiB
I 20:37:28 Initialising SPTI...
I 20:37:28 Searching for SCSI / ATAPI devices...
I 20:37:28 -> Drive 1 - Info: DTSOFT BDROM 1.05 (E:) (Virtual)
I 20:37:28 -> Drive 2 - Info: ATAPI iHAS124   B AL0S (F:) (USB 2.0)
I 20:37:28 Found 1 DVD±RW/RAM and 1 BD-ROM!
I 20:43:31 Close Request Acknowledged
I 20:43:31 Closing Down...
I 20:43:31 Shutting down SPTI...
I 20:43:31 ImgBurn closed!
;
;
; //****************************************\\
;   ImgBurn Version 2.5.8.0 - Log
;   pirmadienis, 15 gruodis 2014, 21:38:42
; \\****************************************//
;
;
I 21:37:12 ImgBurn Version 2.5.8.0 started!
I 21:37:12 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1)
I 21:37:12 Total Physical Memory: 4.099.868 KiB  -  Available: 1.932.944 KiB
I 21:37:12 Initialising SPTI...
I 21:37:12 Searching for SCSI / ATAPI devices...
I 21:37:12 -> Drive 1 - Info: DTSOFT BDROM 1.05 (E:) (Virtual)
I 21:37:12 Found 1 BD-ROM!
I 21:38:42 Close Request Acknowledged
I 21:38:42 Closing Down...
I 21:38:42 Shutting down SPTI...
I 21:38:42 ImgBurn closed!
Posted (edited)

1. To default or like imgburn recommend disable only Online Hyper Tuning and overspeed ? I try with default settings before and get better result but also with big spike on layerbrake.

2. This is bad disk ? : Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in Parameter List 

3. Why Imgburn says "overburning" ?

Edited by GodfatherIMG
Posted

ImgBurn setting and drive settings are 2 different things.

 

Revert ImgBurn's settings to their default values (go into Tools - Settings and hit the defaults button).

 

Then when you go to burn your next disc and it prompts you saying your drive isn't optimally configured for overburning DVD+R DL, let it correct your drive settings.

 

It says overburning because that's what you're doing. You're burning more on the disc than it was designed to hold.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.