Adrianvdh Posted December 19, 2014 Posted December 19, 2014 (edited) Hi all, I have looked at how ImgBurn's Device Information TextBox layout is shown and thought it could be improve, now note this isn't something really that important but it just makes it easier for the user to read it. Example: 'Disc Information:' is a 'header', and the Types and Values are not well separated from the 'header'. DVDFab Virtual Drive 1.1 (SCSI) Current Profile: BD-R Disc Information: Status: Complete State of Last Session: Complete Erasable: No Sessions: 1 Sectors: 14,711,520 Size: 30,129,192,960 bytes Time: 3269:15:45 (MM:SS:FF) File System Information: Sectors: 14,711,520 Size: 30,129,192,960 bytes Time: 3269:15:45 (MM:SS:FF) TOC Information: Session 1... (LBA: 0) -> Track 01 (Mode 1, LBA: 0 - 14711519) -> LeadOut (LBA: 14711520) Track Information: Session 1... -> Track 01 (LTSA: 0, LTS: 14711520, LRA: 0) My suggestion is separating the 'header's' from the Type and Value (below). Personally I think this would be more appealing to the user. DVDFab Virtual Drive 1.1 (SCSI) Current Profile: BD-R Disc Information: Status: Complete State of Last Session: Complete Erasable: No Sessions: 1 Sectors: 14,711,520 Size: 30,129,192,960 bytes Time: 3269:15:45 (MM:SS:FF) File System Information: Sectors: 14,711,520 Size: 30,129,192,960 bytes Time: 3269:15:45 (MM:SS:FF) TOC Information: Session 1... (LBA: 0) -> Track 01 (Mode 1, LBA: 0 - 14711519) -> LeadOut (LBA: 14711520) Track Information: Session 1... -> Track 01 (LTSA: 0, LTS: 14711520, LRA: 0) Edited December 19, 2014 by Adrianvdh
Recommended Posts