PROBLEM BURNING DOUBLE LAYER DISC [MEDIUM NOT PRESENT]

[RAZ1795]

i am trying to burn an IMG file on a double layer disc {i did it alot before with the same file and the same discs} and now i am getting this error , my dvd tray is working and reading all my other discs 

 

I 13:54:56 ImgBurn Version 2.5.8.0 started!

I 13:54:56 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)

I 13:54:56 Total Physical Memory: 2,093,908 KiB  -  Available: 1,014,020 KiB

I 13:54:56 Initialising SPTI...

I 13:54:56 Searching for SCSI / ATAPI devices...

I 13:54:56 -> Drive 1 - Info: DTSOFT BDROM 1.05 (F:) (Virtual)

I 13:54:57 -> Drive 2 - Info: HL-DT-ST DVDRAM GH22NS70 EX00-06 (E:) (ATA)

I 13:54:57 Found 1 DVD±RW/RAM and 1 BD-ROM!

 

[LIGHTNING UK!]

Load ImgBurn, switch to 'Write' mode and keep an eye on the messages that get displayed in the status bar when you insert the disc.

 

When you first insert it, it should say it's in the process of becoming ready. After that, it'll either work or fail. The messages should be straight from the drive so it must be faulty if it can't see the blank discs or something else is messing with things.