themfm Posted February 9, 2015 Posted February 9, 2015 Hello I have been using imgburn for years without any issue until I built my new computer(Windows 7 64 bit, and I used old Ihas124 burner from old computer) . I just built a new computer and installed imgburn. Every time I try and burn a back up of my Xbox 360 games I get keep getting the same I/O error. I have uninstalled imgburn and re-installed and I still receive the same error here is the error I get each time. Any help would be greatly appreciated thanks in advance. I/O Error! Device [0:0:0] ATAPI iHAS124 B ALOS (F:) (SATA) SciStatus: 0x02 Interpretation: Check Condition CDB: 28 00 00 05 40 C0 00 00 01 00 Interpretation: Read (10) - Sector 344256 Sense Area: 70 00 03 00 00 00 00 0A 00 00 00 00 11 05 00 00 00 00 SK Interpretation: Medium Error ASC/ASCQ interpretation: L-EC Uncorrectable Error and here is a copy of the log I 17:25:29 ImgBurn Version 2.5.8.0 started! I 17:25:29 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7601 : Service Pack 1) I 17:25:29 Total Physical Memory: 8,326,888 KiB - Available: 6,550,252 KiB I 17:25:29 Initialising SPTI... I 17:25:29 Searching for SCSI / ATAPI devices... I 17:25:29 -> Drive 1 - Info: ATAPI iHAS124 B AL0S (F:) (SATA) I 17:25:34 -> Drive 2 - Info: ATAPI iHAS224 A ZL0P (E:) (SATA) I 17:25:34 Found 2 DVD±RW/RAMs! I 17:26:58 Operation Started! I 17:26:58 Source File: C:\Users\Caruso's\Desktop\Temp ISO\Middle.Earth.Shadow.Of.Mordor.XBOX360-iMARS DVD 1\Middle.Earth.Shadow.Of.Mordor.XBOX360-iMARS DVD 1\BAD2THEB0N3.dvd I 17:26:58 Source File Sectors: 4,267,015 (MODE1/2048) I 17:26:58 Source File Size: 8,738,846,720 bytes I 17:26:58 Source File Volume Identifier: DVD_ROM I 17:26:58 Source File Volume Set Identifier: 22704000MS UDFBridge I 17:26:58 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 17:26:58 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 17:26:58 Source File File System(s): ISO9660, UDF (1.50) I 17:26:58 Destination Device: [0:0:0] ATAPI iHAS124 B AL0S (F:) (SATA) I 17:26:59 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) I 17:26:59 Destination Media Supported Write Speeds: 2.4x, 4x, 6x, 8x I 17:26:59 Destination Media Sectors: 4,267,040 I 17:26:59 Destination Media L0 Data Zone Capacity: 2,133,520 (Changeable: Yes) I 17:26:59 Write Mode: DVD I 17:26:59 Write Type: DAO I 17:26:59 Write Speed: 4x I 17:26:59 DVD+R DL Reserve Track: No I 17:26:59 Link Size: Auto I 17:26:59 Lock Volume: Yes I 17:26:59 Test Mode: No I 17:26:59 OPC: No I 17:26:59 BURN-Proof: Disabled I 17:26:59 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x) I 17:26:59 Book Type Setting: DVD-ROM I 17:26:59 Advanced Settings - Force HT: Yes, Online HT: No, OverSpeed: No, SmartBurn: Yes I 17:26:59 CD/DVD Life Record Count: 209 - CD/DVD Record Count: 16 I 17:26:59 Optimal L0 Data Zone Capacity: 2,133,520 I 17:26:59 Optimal L0 Data Zone Method: Copied From Original Disc W 17:26:59 Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in Parameter List I 17:26:59 L0 Data Zone Capacity - Effective: 2,133,520 I 17:27:00 Filling Buffer... (1024 MiB) I 17:27:09 Writing LeadIn... I 17:27:41 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014) I 17:27:41 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014) I 17:27:41 Writing Layer 0... (LBA: 0 - 2133519) I 17:41:10 Writing Layer 1... (LBA: 2133520 - 4267014) I 17:54:25 Synchronising Cache... I 17:54:30 Closing Track... I 17:54:31 Finalising Disc... I 17:55:05 Exporting Graph Data... I 17:55:05 Graph Data File: C:\Users\Caruso's\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS124_B_AL0S_MONDAY-FEBRUARY-09-2015_5-26_PM_MKM-003-00_4x.ibg I 17:55:05 Export Successfully Completed! I 17:55:05 Operation Successfully Completed! - Duration: 00:28:06 I 17:55:05 Average Write Rate: 5,320 KiB/s (3.9x) - Maximum Write Rate: 5,499 KiB/s (4.1x) I 17:55:05 Cycling Tray before Verify... W 17:55:12 Waiting for device to become ready... I 17:55:27 Device Ready! I 17:55:28 Operation Started! I 17:55:28 Source Device: [0:0:0] ATAPI iHAS124 B AL0S (F:) (SATA) I 17:55:28 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-003-00) I 17:55:28 Source Media Supported Read Speeds: 2.4x, 4x, 6x, 8x I 17:55:28 Source Media Supported Write Speeds: 2.4x, 4x, 6x, 8x I 17:55:28 Source Media Sectors: 4,267,024 (Track Path: OTP - L0: 2,133,520 - L1: 2,133,504) I 17:55:28 Source Media Size: 8,738,865,152 bytes I 17:55:28 Image File: C:\Users\Caruso's\Desktop\Temp ISO\Middle.Earth.Shadow.Of.Mordor.XBOX360-iMARS DVD 1\Middle.Earth.Shadow.Of.Mordor.XBOX360-iMARS DVD 1\BAD2THEB0N3.dvd I 17:55:28 Image File Sectors: 4,267,015 (MODE1/2048) I 17:55:28 Image File Size: 8,738,846,720 bytes I 17:55:28 Image File Volume Identifier: DVD_ROM I 17:55:28 Image File Volume Set Identifier: 22704000MS UDFBridge I 17:55:28 Image File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 17:55:28 Image File Implementation Identifier: Microsoft CDIMAGE UDF I 17:55:28 Image File File System(s): ISO9660, UDF (1.50) I 17:55:28 Read Speed (Data/Audio): MAX / MAX I 17:55:29 Read Speed - Effective: 3.2x - 8x, 8x - 3.2x I 17:55:30 Verifying Session 1 of 1... (1 Track, LBA: 0 - 4267014) I 17:55:30 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014) I 17:55:30 Verifying Layer 0... (LBA: 0 - 2133519) W 17:57:55 Failed to Read Sectors 344256 - 344287 - Reason: L-EC Uncorrectable Error W 17:58:01 Failed to Read Sector 344256 - Reason: L-EC Uncorrectable Error E 17:59:30 Failed to Read Sector 344256 - Reason: L-EC Uncorrectable Error E 17:59:30 Failed to Verify Sectors! I 17:59:31 Exporting Graph Data... I 17:59:31 Graph Data File: C:\Users\Caruso's\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS124_B_AL0S_MONDAY-FEBRUARY-09-2015_5-26_PM_MKM-003-00_4x.ibg I 17:59:31 Export Successfully Completed! E 17:59:31 Operation Failed! - Duration: 00:04:01 I 17:59:31 Average Verify Rate: 2,880 KiB/s (2.1x) - Maximum Verify Rate: 6,004 KiB/s (4.4x)
themfm Posted February 9, 2015 Author Posted February 9, 2015 I forget to include that I am using Verbatims MK003
LIGHTNING UK! Posted February 10, 2015 Posted February 10, 2015 What does a kprobe scan of that disc look like? Reset imgburn back to the default settings, you don't need to touch anything to get s burn that works fine. Clear the drive's OPC history and try again. That disc is unreadable long before the layerbreak, which is where these things usually fail.
themfm Posted February 10, 2015 Author Posted February 10, 2015 Okay Thanks Lighting I will reset imgburn back to the defaults settings and try and burn another. I did not scan any of the bad burns because if I turn the disc over and look at the disc you can see large gaps in the image that was put on the disc. On a different note should I re-flash my Ihas drive because I am using it with a new mother board just trying to think out of the box here Thanks again for any help I appreciate it.
themfm Posted February 15, 2015 Author Posted February 15, 2015 Okay I uninstalled and re-installed imgburn, i did not change any of the default setting and I was able to burn a movie and verify 100%, I will make the the changes and try and burn a back-up XGD3 image and let you know.
themfm Posted February 15, 2015 Author Posted February 15, 2015 Hey Lighting tried to burn a 360 back up and still could not get a clean burn here are my log fro the last try I 17:06:48 ImgBurn Version 2.5.8.0 started! I 17:06:48 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7601 : Service Pack 1) I 17:06:48 Total Physical Memory: 8,326,888 KiB - Available: 5,946,840 KiB I 17:06:48 Initialising SPTI... I 17:06:48 Searching for SCSI / ATAPI devices... I 17:06:48 -> Drive 1 - Info: ATAPI iHAS124 B AL0S (F:) (SATA) I 17:06:53 -> Drive 2 - Info: ATAPI iHAS224 A ZL0P (E:) (SATA) I 17:06:53 Found 2 DVD±RW/RAMs! I 17:07:23 Operation Started! I 17:07:23 Source File: C:\Users\Caruso's\Desktop\Temp ISO\Middle.Earth.Shadow.Of.Mordor.XBOX360-iMARS DVD 1\Middle.Earth.Shadow.Of.Mordor.XBOX360-iMARS DVD 1\BAD2THEB0N3.dvd I 17:07:23 Source File Sectors: 4,267,015 (MODE1/2048) I 17:07:23 Source File Size: 8,738,846,720 bytes I 17:07:23 Source File Volume Identifier: DVD_ROM I 17:07:23 Source File Volume Set Identifier: 22704000MS UDFBridge I 17:07:23 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 17:07:23 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 17:07:23 Source File File System(s): ISO9660, UDF (1.50) I 17:07:23 Destination Device: [0:0:0] ATAPI iHAS124 B AL0S (F:) (SATA) I 17:07:23 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) I 17:07:23 Destination Media Supported Write Speeds: 2.4x, 4x, 6x, 8x I 17:07:23 Destination Media Sectors: 4,267,040 I 17:07:23 Destination Media L0 Data Zone Capacity: 2,133,520 (Changeable: Yes) I 17:07:23 Write Mode: DVD I 17:07:23 Write Type: DAO I 17:07:23 Write Speed: MAX I 17:07:23 DVD+R DL Reserve Track: No I 17:07:23 Link Size: Auto I 17:07:23 Lock Volume: Yes I 17:07:23 Test Mode: No I 17:07:23 OPC: No I 17:07:23 BURN-Proof: Enabled I 17:07:23 Write Speed Successfully Set! - Effective: 11,080 KB/s (8x) I 17:07:23 Book Type Setting: DVD-ROM I 17:07:23 Advanced Settings - Force HT: Yes, Online HT: No, OverSpeed: No, SmartBurn: Yes I 17:07:23 CD/DVD Life Record Count: 210 - CD/DVD Record Count: 16 I 17:07:23 Optimal L0 Data Zone Capacity: 2,133,520 I 17:07:23 Optimal L0 Data Zone Method: Copied From Original Disc W 17:07:23 Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in Parameter List I 17:07:23 L0 Data Zone Capacity - Effective: 2,133,520 I 17:07:23 Filling Buffer... (80 MiB) I 17:07:24 Writing LeadIn... I 17:08:34 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014) I 17:08:34 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014) I 17:08:34 Writing Layer 0... (LBA: 0 - 2133519) I 17:23:16 Writing Layer 1... (LBA: 2133520 - 4267014) I 17:38:33 Synchronising Cache... I 17:38:56 Closing Track... I 17:38:57 Finalising Disc... I 17:39:31 Exporting Graph Data... I 17:39:31 Graph Data File: C:\Users\Caruso's\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS124_B_AL0S_SUNDAY-FEBRUARY-15-2015_5-07_PM_MKM-003-00_MAX.ibg I 17:39:31 Export Successfully Completed! I 17:39:31 Operation Successfully Completed! - Duration: 00:32:08 I 17:39:31 Average Write Rate: 4,746 KiB/s (3.5x) - Maximum Write Rate: 10,872 KiB/s (8.0x) I 17:39:31 Cycling Tray before Verify... W 17:39:39 Waiting for device to become ready... I 17:39:54 Device Ready! I 17:39:54 Operation Started! I 17:39:54 Source Device: [0:0:0] ATAPI iHAS124 B AL0S (F:) (SATA) I 17:39:54 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-003-00) I 17:39:54 Source Media Supported Read Speeds: 2.4x, 4x, 6x, 8x I 17:39:54 Source Media Supported Write Speeds: 2.4x, 4x, 6x, 8x I 17:39:54 Source Media Sectors: 4,267,024 (Track Path: OTP - L0: 2,133,520 - L1: 2,133,504) I 17:39:54 Source Media Size: 8,738,865,152 bytes I 17:39:54 Image File: C:\Users\Caruso's\Desktop\Temp ISO\Middle.Earth.Shadow.Of.Mordor.XBOX360-iMARS DVD 1\Middle.Earth.Shadow.Of.Mordor.XBOX360-iMARS DVD 1\BAD2THEB0N3.dvd I 17:39:54 Image File Sectors: 4,267,015 (MODE1/2048) I 17:39:54 Image File Size: 8,738,846,720 bytes I 17:39:54 Image File Volume Identifier: DVD_ROM I 17:39:54 Image File Volume Set Identifier: 22704000MS UDFBridge I 17:39:54 Image File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 17:39:54 Image File Implementation Identifier: Microsoft CDIMAGE UDF I 17:39:54 Image File File System(s): ISO9660, UDF (1.50) I 17:39:54 Read Speed (Data/Audio): MAX / MAX I 17:39:56 Read Speed - Effective: 3.2x - 8x, 8x - 3.2x I 17:39:56 Verifying Session 1 of 1... (1 Track, LBA: 0 - 4267014) I 17:39:56 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014) I 17:39:56 Verifying Layer 0... (LBA: 0 - 2133519) W 17:43:12 Failed to Read Sectors 524896 - 524927 - Reason: L-EC Uncorrectable Error W 17:43:21 Failed to Read Sector 524896 - Reason: L-EC Uncorrectable Error E 17:43:34 Failed to Read Sector 524896 - Reason: L-EC Uncorrectable Error E 17:43:34 Failed to Verify Sectors! I 17:43:35 Exporting Graph Data... I 17:43:35 Graph Data File: C:\Users\Caruso's\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS124_B_AL0S_SUNDAY-FEBRUARY-15-2015_5-07_PM_MKM-003-00_MAX.ibg I 17:43:35 Export Successfully Completed! E 17:43:35 Operation Failed! - Duration: 00:03:39 I 17:43:35 Average Verify Rate: 4,815 KiB/s (3.6x) - Maximum Verify Rate: 6,696 KiB/s (5.0x)
LIGHTNING UK! Posted February 15, 2015 Posted February 15, 2015 Did you clear the drive's OPC history like I told you to in my previous post? Please do a kprobe scan on that disc @ 4x and post a screenshot of the final graph (not just the results/numbers/figures). Maybe your drive needs cleaning or you've got a bad batch of discs.
themfm Posted February 15, 2015 Author Posted February 15, 2015 I completely uninstalled and re-installed imgburn, so no I did not clear OPC this time but every other I did clear the OPC. My habit is to clear the OPC before every burn. I will scan with Kprobe and post pic thanks for for the help. As far as the disc go I have used about 30 out of a 50 pack and had not had any errors or failed to verify unitl I built the new computer.
LIGHTNING UK! Posted February 15, 2015 Posted February 15, 2015 The drive's OPC is nothing to do with ImgBurn, so uninstalling / reinstalling doesn't touch it. There's no reason for your drive to behave differently in your new machine. It's a piece of hardware and should be no more / less capable of burning discs now than it was before. If your old PC is still usable, put the drive back in it and try it again. Do not clear OPC each time, it's there so the drive can 'learn' how to burn. I said to do it once so it cleared out anything weird, after that you shouldn't touch it again.
themfm Posted February 15, 2015 Author Posted February 15, 2015 I know I have said this before, but thanks again for your quick responses I appreciate it. Old machine is not around. Okay I will buy some new verbatims clean my drive clear OPC ONCE and not touch it any more. Do I need to adjust the buffer or change any of the force hyper tuning, online hyper tuning, overspeed or smart burn? I started Kprobe and at 12% and the bottom of screen I and getting "Servo error 030900 at LBA" and it is still count.
themfm Posted February 16, 2015 Author Posted February 16, 2015 Lighting here is a word doc of both the back of the disc from my last attempt and the kprobe. screen prints.doc
themfm Posted February 16, 2015 Author Posted February 16, 2015 Hey Lighting I downloaded burner max payload and used my other drive and it looks like it worked fine 100%burn and 100% verify, so it looks like my drive laser is gone. Thanks for your help getting this resolved.
Recommended Posts