MarcDC Posted March 26, 2015 Posted March 26, 2015 On a Samsung BD writer (usb se-506BB/TSBD) Imgburn says supported write speed 2x,4x,6x. for a BD-R Sony RITEK-BR3-000. I did set AWS at 4, and (to make sure?) set the speed at 4 before starting write. The 4x speed seems accepted (see log) however while writing the speed goes up and up (up to 5,8x probably too fast for the USB connection). Then the verify fails with L-EC uncorrectable error. BTW I had no problems on same setup with Sony BD-RE (the only change I made to the Imgburn settings is BD-RE fasr write). Any idea? Thanks for this nice progam I used for years without any problem... ********************************************Imgburn log************************************************* I 14:07:39 ImgBurn Version 2.5.8.0 started!I 14:07:39 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7601 : Service Pack 1)I 14:07:39 Total Physical Memory: 4,158,580 KiB - Available: 1,901,152 KiBI 14:07:39 Initialising SPTI...I 14:07:39 Searching for SCSI / ATAPI devices...I 14:07:40 -> Drive 1 - Info: DVDFab Virtual Drive 1.1 (Y:) (SCSI)I 14:07:43 -> Drive 2 - Info: MATSHITA DVD-RAM UJ862AS 1.10 (D:) (SATA)I 14:07:44 -> Drive 3 - Info: TSSTcorp BDDVDW SE-506BB TS00 (X:) (USB 2.0)I 14:07:44 Found 1 DVD±RW/RAM, 1 BD-ROM/HD DVD-ROM and 1 BD-RE XL!I 14:09:23 Operation Started!I 14:09:23 Source File: I:\COMPIL-2014-SHORT-V3-X.V.ISOI 14:09:23 Source File Sectors: 10,304,992 (MODE1/2048)I 14:09:23 Source File Size: 21,104,623,616 bytesI 14:09:23 Source File Volume Identifier: COMPIL-2014-SHORT-V3-X.VI 14:09:23 Source File Volume Set Identifier: 46518A33009D3CD8I 14:09:23 Source File Application Identifier: ImgBurn v2.5.8.0I 14:09:23 Source File Implementation Identifier: ImgBurnI 14:09:23 Source File File System(s): UDF (2.50)I 14:09:23 Destination Device: [0:0:0] TSSTcorp BDDVDW SE-506BB TS00 (X:) (USB)I 14:09:23 Destination Media Type: BD-R (Disc ID: RITEK-BR3-000)I 14:09:23 Destination Media Supported Write Speeds: 2x; 4x; 6xI 14:09:23 Destination Media Sectors: 12,219,392I 14:09:23 Write Mode: BDI 14:09:23 Write Type: DAOI 14:09:23 Write Speed: 2xI 14:09:23 Hardware Defect Management Active: NoI 14:09:23 BD-R Verify Not Required: NoI 14:09:23 Link Size: AutoI 14:09:23 Lock Volume: YesI 14:09:23 Test Mode: NoI 14:09:23 OPC: YesI 14:09:23 BURN-Proof: EnabledI 14:09:23 Write Speed Successfully Set! - Effective: 8,992 KB/s (2x)I 14:10:13 Filling Buffer... (80 MiB)I 14:10:16 Writing LeadIn...I 14:10:33 Writing Session 1 of 1... (1 Track, LBA: 0 - 10304991)I 14:10:33 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 10304991)I 14:35:08 Synchronising Cache...I 14:35:12 Closing Track...I 14:35:13 Finalising Disc...I 14:36:23 Operation Successfully Completed! - Duration: 00:27:00I 14:36:23 Average Write Rate: 13,982 KiB/s (3.2x) - Maximum Write Rate: 25,283 KiB/s (5.8x)I 14:36:23 Cycling Tray before Verify...W 14:36:36 Waiting for device to become ready...I 14:36:50 Device Ready!I 14:36:52 Operation Started!I 14:36:52 Source Device: [0:0:0] TSSTcorp BDDVDW SE-506BB TS00 (X:) (USB)I 14:36:52 Source Media Type: BD-R (Disc ID: RITEK-BR3-000)I 14:36:52 Source Media Supported Read Speeds: 2.2x; 4x; 6xI 14:36:52 Source Media Supported Write Speeds: 2x; 4x; 6xI 14:36:52 Source Media Sectors: 10,304,992I 14:36:52 Source Media Size: 21,104,623,616 bytesI 14:36:52 Image File: I:\COMPIL-2014-SHORT-V3-X.V.ISOI 14:36:52 Image File Sectors: 10,304,992 (MODE1/2048)I 14:36:52 Image File Size: 21,104,623,616 bytesI 14:36:52 Image File Volume Identifier: COMPIL-2014-SHORT-V3-X.VI 14:36:52 Image File Volume Set Identifier: 46518A33009D3CD8I 14:36:52 Image File Application Identifier: ImgBurn v2.5.8.0I 14:36:52 Image File Implementation Identifier: ImgBurnI 14:36:52 Image File File System(s): UDF (2.50)I 14:36:52 Read Speed (Data/Audio): MAX / MAXI 14:36:53 Read Speed - Effective: 2.2x - 6xI 14:36:53 Verifying Session 1 of 1... (1 Track, LBA: 0 - 10304991)I 14:36:53 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 10304991)W 14:45:46 Failed to Read Sectors 3731872 - 3731903 - Reason: L-EC Uncorrectable ErrorW 14:45:55 Failed to Read Sector 3731872 - Reason: L-EC Uncorrectable ErrorW 14:45:55 Sector 3731872 maps to File: \BDMV\STREAM\00002.m2tsW 14:45:55 Retrying (1 of 2)...W 14:46:05 Retry Failed - Reason: L-EC Uncorrectable ErrorW 14:46:05 Retrying (2 of 2)...W 14:46:14 Retry Failed - Reason: L-EC Uncorrectable ErrorE 14:46:19 Failed to Read Sector 3731872 - Reason: L-EC Uncorrectable ErrorE 14:46:19 Sector 3731872 maps to File: \BDMV\STREAM\00002.m2tsE 14:46:20 Failed to Verify Sectors!E 14:46:21 Operation Failed! - Duration: 00:09:27I 14:46:21 Average Verify Rate: 13,186 KiB/s (3.0x) - Maximum Verify Rate: 17,635 KiB/s (4.0x)
LIGHTNING UK! Posted March 26, 2015 Posted March 26, 2015 The drive shouldn't have done that. It accepted the request to change the write speed to 2x and when queried for the speed it was going to burn at, it reported 2x. So there's no reason at all for it to have messed up and burnt faster than 2x. Maybe it's a bug in the firmware on the drive? Do you have any other discs you can try? I assume it's ok with DVDs? You can update the drive's firmware to TS01 from here: http://www.firmwarehq.com/Samsung/SE-506BB/files.html
MarcDC Posted March 27, 2015 Author Posted March 27, 2015 Ok, Firmware is updated, problem remains exactly the same. The buffer remains steady full the Devide buffer shows steep dives deeper and more predsent as writing speed speed increases... Thanks for your attention, Marc Next time, will it be usefull to request the graph? I usualy do not ask Imgbuild to record one...and BD are a bit expensive... Should I try Verbatim? **************************************Imgburn last log******************************************* I 16:48:55 ImgBurn Version 2.5.8.0 started!I 16:48:55 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7601 : Service Pack 1)I 16:48:55 Total Physical Memory: 4,158,580 KiB - Available: 2,078,652 KiBI 16:48:55 Initialising SPTI...I 16:48:55 Searching for SCSI / ATAPI devices...I 16:48:55 -> Drive 1 - Info: DVDFab Virtual Drive 1.1 (Y:) (SCSI)I 16:48:55 -> Drive 2 - Info: MATSHITA DVD-RAM UJ862AS 1.10 (D:) (SATA)I 16:48:58 -> Drive 3 - Info: TSSTcorp BDDVDW SE-506BB TS01 (E:) (USB 2.0)I 16:48:58 Found 1 DVD±RW/RAM, 1 BD-ROM/HD DVD-ROM and 1 BD-RE XL!I 16:49:15 Operation Started!I 16:49:15 Source File: I:\COMPIL-2014-SHORT-V3-X.V.ISOI 16:49:15 Source File Sectors: 10,304,992 (MODE1/2048)I 16:49:15 Source File Size: 21,104,623,616 bytesI 16:49:15 Source File Volume Identifier: COMPIL-2014-SHORT-V3-X.VI 16:49:15 Source File Volume Set Identifier: 46518A33009D3CD8I 16:49:15 Source File Application Identifier: ImgBurn v2.5.8.0I 16:49:15 Source File Implementation Identifier: ImgBurnI 16:49:15 Source File File System(s): UDF (2.50)I 16:49:15 Destination Device: [0:0:0] TSSTcorp BDDVDW SE-506BB TS01 (E:) (USB)I 16:49:15 Destination Media Type: BD-R (Disc ID: RITEK-BR3-000)I 16:49:15 Destination Media Supported Write Speeds: 2x; 4x; 6xI 16:49:15 Destination Media Sectors: 12,219,392I 16:49:15 Write Mode: BDI 16:49:15 Write Type: DAOI 16:49:15 Write Speed: 2xI 16:49:15 Hardware Defect Management Active: NoI 16:49:15 BD-R Verify Not Required: NoI 16:49:15 Link Size: AutoI 16:49:15 Lock Volume: YesI 16:49:15 Test Mode: NoI 16:49:15 OPC: YesI 16:49:15 BURN-Proof: EnabledI 16:49:15 Write Speed Successfully Set! - Effective: 8,992 KB/s (2x)I 16:50:03 Filling Buffer... (80 MiB)I 16:50:06 Writing LeadIn...I 16:50:23 Writing Session 1 of 1... (1 Track, LBA: 0 - 10304991)I 16:50:23 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 10304991)I 17:17:03 Synchronising Cache...I 17:17:07 Closing Track...I 17:17:08 Finalising Disc...I 17:18:21 Operation Successfully Completed! - Duration: 00:29:05I 17:18:21 Average Write Rate: 12,889 KiB/s (2.9x) - Maximum Write Rate: 25,189 KiB/s (5.7x) I 17:18:21 Cycling Tray before Verify...W 17:18:32 Waiting for device to become ready...I 17:18:46 Device Ready!I 17:18:47 Operation Started!I 17:18:47 Source Device: [0:0:0] TSSTcorp BDDVDW SE-506BB TS01 (E:) (USB)I 17:18:47 Source Media Type: BD-R (Disc ID: RITEK-BR3-000)I 17:18:47 Source Media Supported Read Speeds: 2.2x; 4x; 6xI 17:18:47 Source Media Supported Write Speeds: 2x; 4x; 6xI 17:18:47 Source Media Sectors: 10,304,992I 17:18:47 Source Media Size: 21,104,623,616 bytesI 17:18:47 Image File: I:\COMPIL-2014-SHORT-V3-X.V.ISOI 17:18:47 Image File Sectors: 10,304,992 (MODE1/2048)I 17:18:47 Image File Size: 21,104,623,616 bytesI 17:18:47 Image File Volume Identifier: COMPIL-2014-SHORT-V3-X.VI 17:18:47 Image File Volume Set Identifier: 46518A33009D3CD8I 17:18:47 Image File Application Identifier: ImgBurn v2.5.8.0I 17:18:47 Image File Implementation Identifier: ImgBurnI 17:18:47 Image File File System(s): UDF (2.50)I 17:18:47 Read Speed (Data/Audio): MAX / MAXI 17:18:48 Read Speed - Effective: 2.2x - 6xI 17:18:48 Verifying Session 1 of 1... (1 Track, LBA: 0 - 10304991)I 17:18:48 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 10304991)W 17:27:43 Failed to Read Sectors 3727040 - 3727071 - Reason: L-EC Uncorrectable ErrorW 17:27:51 Failed to Read Sector 3727040 - Reason: L-EC Uncorrectable ErrorW 17:27:51 Sector 3727040 maps to File: \BDMV\STREAM\00002.m2tsW 17:27:51 Retrying (1 of 2)...W 17:28:00 Retry Failed - Reason: L-EC Uncorrectable ErrorW 17:28:00 Retrying (2 of 2)...W 17:28:10 Retry Failed - Reason: L-EC Uncorrectable ErrorE 17:30:01 Failed to Read Sector 3727040 - Reason: L-EC Uncorrectable ErrorE 17:30:01 Sector 3727040 maps to File: \BDMV\STREAM\00002.m2tsE 17:30:01 Failed to Verify Sectors!E 17:30:02 Operation Failed! - Duration: 00:11:14I 17:30:02 Average Verify Rate: 11,092 KiB/s (2.5x) - Maximum Verify Rate: 17,626 KiB/s (4.0x)
LIGHTNING UK! Posted March 27, 2015 Posted March 27, 2015 Hmm weird. Next time you burn one, please do capture graph data so I can take a look. It might be worth turning off 'Perform OPC Before Write' as that's off by default... and 'BD-R Verify Not Required' is usually on by default (you've turned it off). If you have discs with a different MID, give those a try.
MarcDC Posted March 28, 2015 Author Posted March 28, 2015 It will take a while to lay hands on another MID, so be patient, I 'll come back...one day
MarcDC Posted April 2, 2015 Author Posted April 2, 2015 Had a problem with my last post (hope it is not duplicated...) Sony did change its manufacturing and dye: my problems started when they switched from "Made in Japan MID SONY-NN3-002" to "Made in Taiwan MID RITEK-BR3-000. It may be easy for Sony to cut cost, it will be more difficult for Sony to regain my confidence... ****************************************Imgburn Log*************************************************** I 20:58:28 ImgBurn Version 2.5.8.0 started!I 20:58:28 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7601 : Service Pack 1)I 20:58:28 Total Physical Memory: 4,158,580 KiB - Available: 2,085,076 KiBI 20:58:28 Initialising SPTI...I 20:58:28 Searching for SCSI / ATAPI devices...I 20:58:28 -> Drive 1 - Info: DVDFab Virtual Drive 1.1 (Y:) (SCSI)I 20:58:29 -> Drive 2 - Info: MATSHITA DVD-RAM UJ862AS 1.10 (D:) (SATA)I 20:58:29 -> Drive 3 - Info: TSSTcorp BDDVDW SE-506BB TS01 (E:) (USB 2.0)I 20:58:29 Found 1 DVD±RW/RAM, 1 BD-ROM/HD DVD-ROM and 1 BD-RE XL!I 20:59:19 Operation Started!I 20:59:19 Source File: I:\COMPIL-2014-SHORT-V3-X.V.ISOI 20:59:19 Source File Sectors: 10,304,992 (MODE1/2048)I 20:59:19 Source File Size: 21,104,623,616 bytesI 20:59:19 Source File Volume Identifier: COMPIL-2014-SHORT-V3-X.VI 20:59:19 Source File Volume Set Identifier: 46518A33009D3CD8I 20:59:19 Source File Application Identifier: ImgBurn v2.5.8.0I 20:59:19 Source File Implementation Identifier: ImgBurnI 20:59:19 Source File File System(s): UDF (2.50)I 20:59:19 Destination Device: [0:0:0] TSSTcorp BDDVDW SE-506BB TS01 (E:) (USB)I 20:59:19 Destination Media Type: BD-R (Disc ID: RITEK-BR3-000)I 20:59:19 Destination Media Supported Write Speeds: 2x; 4x; 6xI 20:59:19 Destination Media Sectors: 12,219,392I 20:59:19 Write Mode: BDI 20:59:19 Write Type: DAOI 20:59:19 Write Speed: 2xI 20:59:19 Hardware Defect Management Active: NoI 20:59:19 BD-R Verify Not Required: NoI 20:59:19 Link Size: AutoI 20:59:19 Lock Volume: YesI 20:59:19 Test Mode: YesI 20:59:19 OPC: YesI 20:59:19 BURN-Proof: EnabledI 20:59:19 Write Speed Successfully Set! - Effective: 8,992 KB/s (2x)I 20:59:26 Filling Buffer... (80 MiB)I 20:59:29 Writing LeadIn...I 20:59:30 Writing Session 1 of 1... (1 Track, LBA: 0 - 10304991)I 20:59:30 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 10304991)I 21:34:56 Synchronising Cache...I 21:35:03 Closing Track...I 21:35:04 Finalising Disc...I 21:35:23 Cycling Tray after Test Write...I 21:35:26 Operation Successfully Completed! - Duration: 00:36:07I 21:35:26 Average Write Rate: 9,698 KiB/s (2.2x) - Maximum Write Rate: 9,739 KiB/s (2.2x)I 21:37:30 Operation Started!I 21:37:30 Source File: I:\COMPIL-2014-SHORT-V3-X.V.ISOI 21:37:30 Source File Sectors: 10,304,992 (MODE1/2048)I 21:37:30 Source File Size: 21,104,623,616 bytesI 21:37:30 Source File Volume Identifier: COMPIL-2014-SHORT-V3-X.VI 21:37:30 Source File Volume Set Identifier: 46518A33009D3CD8I 21:37:30 Source File Application Identifier: ImgBurn v2.5.8.0I 21:37:30 Source File Implementation Identifier: ImgBurnI 21:37:30 Source File File System(s): UDF (2.50)I 21:37:30 Destination Device: [0:0:0] TSSTcorp BDDVDW SE-506BB TS01 (E:) (USB)I 21:37:30 Destination Media Type: BD-R (Disc ID: RITEK-BR3-000)I 21:37:30 Destination Media Supported Write Speeds: 2x; 4x; 6xI 21:37:30 Destination Media Sectors: 12,219,392I 21:37:30 Write Mode: BDI 21:37:30 Write Type: DAOI 21:37:30 Write Speed: 2xI 21:37:30 Hardware Defect Management Active: NoI 21:37:30 BD-R Verify Not Required: NoI 21:37:30 Link Size: AutoI 21:37:30 Lock Volume: YesI 21:37:30 Test Mode: NoI 21:37:30 OPC: YesI 21:37:30 BURN-Proof: EnabledI 21:37:31 Write Speed Successfully Set! - Effective: 8,992 KB/s (2x)I 21:38:20 Filling Buffer... (80 MiB)I 21:38:22 Writing LeadIn...I 21:38:41 Writing Session 1 of 1... (1 Track, LBA: 0 - 10304991)I 21:38:41 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 10304991)I 22:03:12 Synchronising Cache...I 22:03:16 Closing Track...I 22:03:17 Finalising Disc...I 22:04:32 Operation Successfully Completed! - Duration: 00:27:01I 22:04:32 Average Write Rate: 14,010 KiB/s (3.2x) - Maximum Write Rate: 25,303 KiB/s (5.8x)I 22:04:32 Cycling Tray before Verify...W 22:04:43 Waiting for device to become ready...I 22:04:57 Device Ready!I 22:04:58 Operation Started!I 22:04:58 Source Device: [0:0:0] TSSTcorp BDDVDW SE-506BB TS01 (E:) (USB)I 22:04:58 Source Media Type: BD-R (Disc ID: RITEK-BR3-000)I 22:04:58 Source Media Supported Read Speeds: 2.2x; 4x; 6xI 22:04:58 Source Media Supported Write Speeds: 2x; 4x; 6xI 22:04:58 Source Media Sectors: 10,304,992I 22:04:58 Source Media Size: 21,104,623,616 bytesI 22:04:58 Image File: I:\COMPIL-2014-SHORT-V3-X.V.ISOI 22:04:58 Image File Sectors: 10,304,992 (MODE1/2048)I 22:04:58 Image File Size: 21,104,623,616 bytesI 22:04:58 Image File Volume Identifier: COMPIL-2014-SHORT-V3-X.VI 22:04:58 Image File Volume Set Identifier: 46518A33009D3CD8I 22:04:58 Image File Application Identifier: ImgBurn v2.5.8.0I 22:04:58 Image File Implementation Identifier: ImgBurnI 22:04:58 Image File File System(s): UDF (2.50)I 22:04:58 Read Speed (Data/Audio): MAX / MAXI 22:04:59 Read Speed - Effective: 2.2x - 6xI 22:04:59 Verifying Session 1 of 1... (1 Track, LBA: 0 - 10304991)I 22:04:59 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 10304991)W 22:14:03 Failed to Read Sectors 3801920 - 3801951 - Reason: L-EC Uncorrectable ErrorW 22:14:10 Failed to Read Sector 3801920 - Reason: L-EC Uncorrectable ErrorW 22:14:10 Sector 3801920 maps to File: \BDMV\STREAM\00002.m2tsW 22:14:10 Retrying (1 of 2)...W 22:14:20 Retry Failed - Reason: L-EC Uncorrectable ErrorW 22:14:20 Retrying (2 of 2)...W 22:14:29 Retry Failed - Reason: L-EC Uncorrectable ErrorE 22:14:34 Failed to Read Sector 3801920 - Reason: L-EC Uncorrectable ErrorE 22:14:34 Sector 3801920 maps to File: \BDMV\STREAM\00002.m2tsE 22:14:34 Failed to Verify Sectors!E 22:14:35 Operation Failed! - Duration: 00:09:35I 22:14:35 Average Verify Rate: 13,247 KiB/s (3.0x) - Maximum Verify Rate: 17,744 KiB/s (4.0x) TSSTcorp_BDDVDW_SE-506BB_TS01_JEUDI-2-AVRIL-2015_21-37_RITEK-BR3-000_2x-Error.ibg
MarcDC Posted April 3, 2015 Author Posted April 3, 2015 To keep the ball rolling, I did exactly the same test but with "test mode ON". See attached graph (speed requested:2X, stabilized at 2.2X). I could not detect if the result was OK: imgburn did not really write (as expected). Thnks for your attention. TSSTcorp_BDDVDW_SE-506BB_TS01_JEUDI-2-AVRIL-2015_20-59_RITEK-BR3-000_2x-test-mode yes.ibg
LIGHTNING UK! Posted April 3, 2015 Posted April 3, 2015 Test mode doesn't often work for anything other than CDs and dvd-R media. Drives usually ignore the flag to use test mode and end up actually writing to the disc. I can't look at the graph at the moment but will as soon as I can (next week).
MarcDC Posted April 30, 2015 Author Posted April 30, 2015 I got new "other" Sony BD-R. No way to find out without opening the pack (of 10) if i'ts Made in Japan or Taiwan. I took the chance: once opened It'is "made in nowhere". The cardboard (inside) says Accucore (as it was on the "made in Japan" Sony MID, that burned OK). Now, once tested with Imgburn, it says "RITEK-BR3-000" (Bad luck)., BUT did burn OK. I set the speed at 4x, it burned at any speed from 0 to 5;3??? (see log). Hope this helps. MarcDC ImgBurn-Last-b.logTSSTcorp_BDDVDW_SE-506BB_TS01_JEUDI-30-AVRIL-2015_16-17_RITEK-BR3-000_4x.ibg
MarcDC Posted May 2, 2015 Author Posted May 2, 2015 Back to square one: I only managed to burn corectly ONE disk. As there is no way to read the MID without opening the box, I now have a problem for having my purchase refunded (VandenBorre Waterloo). I should have tested the BD keeping the pack closed...How do I do that? Please explain.
Recommended Posts