raptor1015 Posted October 20, 2015 Posted October 20, 2015 (edited) Hi, first off I'm using a Liteon IHAS 124 (F - revision) drive....my PC is all up to speed. I have two XBOX 360 game ISO's - 1. Scream Ride & 2. Nike Train USA...both are like 8.5g....I use burner max payload 0.15and Imgburn 2.5.8.0...I don't use expensive verbatims I use philips or TDK or Optimum..I never have any issues with coasters or games not playing until i ran into these oversized files....I have the imgburn settings as I've read. buffer at 512, opc enabled, burn proof disabled, advance setting as recommended..test burns with 3 different types of media all complete successful...then when I do the actual burn it fails each time right at the layer break 2133520 (just over half way through the burn) both game .DVD files show the layer break the same 2133520....I had it set to automatically chose the layer break & entered it manually to the same outcome...opc on or off doesn't matter...I have made about 15 coasters so far trying to figure this out...I have even tried an ASUS DRW 24B 1ST B drive, same results.....I think I didn't forget anything.....any ideas? would be greatly appreciated....oh yeah I have truncate selected in imgburn, I've tried with overburn selected too same results.. I have overburn selected now....I also ran both iso's through abgx first and they came out good to go.....and yes both drives show 8.7gigs after burner max is enabled........I have no issues burning the regular 6 to 7.5 g games I guess you call those XDG2 games... also understand I have tried a variety of other setting from what i have read....I've made over 20 coasters trying to figure this out.... the games came from www.gametorrents.com ......I finally broke down and have some Verbatims coming tomorow via mail to try.....the games I have are on a variety of discs (none are verbatims and they all work) my issues only started with these oversized game iso's.......I think I covered everything....I'll be checking for replies comstantly...I hope someone can help me figure this out...thx so much..... Here's my LOG FILE: both iso game files do the same thing... I 07:32:25 ImgBurn Version 2.5.8.0 started!I 07:32:25 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7601 : Service Pack 1)I 07:32:25 Total Physical Memory: 8,293,056 KiB - Available: 4,136,748 KiBI 07:32:25 Initialising SPTI...I 07:32:25 Searching for SCSI / ATAPI devices...I 07:32:26 -> Drive 1 - Info: MATSHITA BD-CMB UJ141EF 1.00 (D:) (ATAPI)I 07:32:26 Found 1 BD-ROM/DVD±RW!W 08:01:35 Device Arrival Detected!I 08:01:35 Searching for SCSI / ATAPI devices...I 08:01:35 -> Drive 1 - Info: MATSHITA BD-CMB UJ141EF 1.00 (D:) (ATAPI)E 08:01:35 DeviceIoControl(IOCTL_USB_GET_NODE_CONNECTION_INFORMATION_EX) Failed!E 08:01:35 Reason: The parameter is incorrect.I 08:01:36 -> Drive 2 - Info: ATAPI iHAS124 F CL08 (F:) (USB)I 08:01:36 Found 1 DVD±RW/RAM and 1 BD-ROM/DVD±RW!I 08:08:25 Operation Started!I 08:08:25 Source File: C:\Users\Toshiba\Desktop\scream ride\s-screamride.dvdI 08:08:25 Source File Sectors: 4,267,015 (MODE1/2048)I 08:08:25 Source File Size: 8,738,846,720 bytesI 08:08:25 Source File Volume Identifier: DVD_ROMI 08:08:25 Source File Volume Set Identifier: b0b44000MS UDFBridgeI 08:08:25 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)I 08:08:25 Source File Implementation Identifier: Microsoft CDIMAGE UDFI 08:08:25 Source File File System(s): ISO9660, UDF (1.50)I 08:08:25 Destination Device: [0:0:0] ATAPI iHAS124 F CL08 (F:) (USB)I 08:08:25 Destination Media Type: DVD+R DL (Disc ID: CMC MAG-D03-64)I 08:08:25 Destination Media Supported Write Speeds: 4x, 6x, 8x, 12x, 16xI 08:08:25 Destination Media Sectors: 4,267,040I 08:08:25 Destination Media L0 Data Zone Capacity: 2,133,520 (Changeable: Yes)I 08:08:25 Write Mode: DVDI 08:08:25 Write Type: DAOI 08:08:25 Write Speed: 2xI 08:08:25 DVD+R DL Reserve Track: NoI 08:08:25 Link Size: AutoI 08:08:25 Lock Volume: YesI 08:08:25 Test Mode: NoI 08:08:25 OPC: YesI 08:08:25 BURN-Proof: DisabledW 08:08:25 Write Speed Miscompare! - Wanted: 2,770 KB/s (2x), Got: 5,540 KB/s (4x)W 08:08:25 The drive only supports writing these discs at 4x, 6x, 8x, 12x, 16x.I 08:08:25 Book Type Setting: DVD-ROMI 08:08:25 Advanced Settings - Force HT: Yes, Online HT: No, OverSpeed: Yes, SmartBurn: YesI 08:08:57 Optimal L0 Data Zone Capacity: 2,133,520I 08:08:57 Optimal L0 Data Zone Method: Copied From Original DiscI 08:08:57 Set L0 Data Zone Capacity Succeeded!I 08:08:57 L0 Data Zone Capacity - Effective: 2,133,520I 08:08:57 Filling Buffer... (86 MiB)I 08:08:58 Writing LeadIn...I 08:09:01 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014)I 08:09:01 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)I 08:09:01 Writing Layer 0... (LBA: 0 - 2133519)I 08:22:27 Writing Layer 1... (LBA: 2133520 - 4267014)W 08:27:01 Failed to Write Sectors 2166704 - 2166735 - Reason: Write ErrorW 08:27:01 Retrying (1 of 20)...W 08:27:07 Retry Failed - Reason: Invalid Address For WriteW 08:27:07 Retrying (2 of 20)...W 08:27:07 Retry Failed - Reason: Invalid Address For WriteW 08:27:07 Retrying (3 of 20)...W 08:27:07 Retry Failed - Reason: Invalid Address For WriteW 08:27:07 Retrying (4 of 20)...W 08:27:07 Retry Failed - Reason: Invalid Address For WriteW 08:27:07 Retrying (5 of 20)...W 08:27:07 Retry Failed - Reason: Invalid Address For WriteW 08:27:07 Retrying (6 of 20)...W 08:27:07 Retry Failed - Reason: Invalid Address For WriteW 08:27:07 Retrying (7 of 20)...W 08:27:07 Retry Failed - Reason: Invalid Address For WriteW 08:27:07 Retrying (8 of 20)...W 08:27:07 Retry Failed - Reason: Invalid Address For WriteW 08:27:07 Retrying (9 of 20)...W 08:27:07 Retry Failed - Reason: Invalid Address For WriteW 08:27:07 Retrying (10 of 20)...W 08:27:07 Retry Failed - Reason: Invalid Address For WriteW 08:27:07 Retrying (11 of 20)...W 08:27:07 Retry Failed - Reason: Invalid Address For WriteW 08:27:07 Retrying (12 of 20)...W 08:27:07 Retry Failed - Reason: Invalid Address For WriteW 08:27:07 Retrying (13 of 20)...W 08:27:07 Retry Failed - Reason: Invalid Address For WriteW 08:27:07 Retrying (14 of 20)...W 08:27:07 Retry Failed - Reason: Invalid Address For WriteW 08:27:07 Retrying (15 of 20)...W 08:27:07 Retry Failed - Reason: Invalid Address For WriteW 08:27:07 Retrying (16 of 20)...W 08:27:07 Retry Failed - Reason: Invalid Address For WriteW 08:27:07 Retrying (17 of 20)...W 08:27:07 Retry Failed - Reason: Invalid Address For WriteW 08:27:07 Retrying (18 of 20)...W 08:27:07 Retry Failed - Reason: Invalid Address For WriteW 08:27:07 Retrying (19 of 20)...W 08:27:07 Retry Failed - Reason: Invalid Address For WriteW 08:27:07 Retrying (20 of 20)...W 08:27:07 Retry Failed - Reason: Invalid Address For WriteE 08:29:45 Failed to Write Sectors 2166704 - 2166735 - Reason: Write ErrorE 08:29:45 Next Writable Address: 2166544I 08:29:46 Synchronising Cache...W 08:29:52 User opted to skip the 'Close Track/Session/Disc' functions.E 08:29:52 Failed to Write Image!I 08:29:54 Exporting Graph Data...I 08:29:54 Graph Data File: C:\Users\Toshiba\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS124_F_CL08_TUESDAY-OCTOBER-20-2015_8-08_AM_CMC_MAG-D03-64_2x.ibgI 08:29:54 Export Successfully Completed!E 08:29:54 Operation Failed! - Duration: 00:21:27I 08:29:54 Average Write Rate: 3,483 KiB/s (2.6x) - Maximum Write Rate: 6,317 KiB/s (4.7x) Edited October 20, 2015 by raptor1015
LIGHTNING UK! Posted October 21, 2015 Posted October 21, 2015 Reset ImgBurn's settings. There's no reason to change anything and half the stuff you read on the internet is complete rubbish. The program will tell you which drive settings to change (and offer to do it for you) when you're using the recommended MKM-003-00 discs. Basically, just enable the 'force hypertuning' option. The others are left alone. Burn them at 4x and you don't need the payload tool as 2.5.8.0 does it automatically.
raptor1015 Posted October 21, 2015 Author Posted October 21, 2015 (edited) thank you so much for the information.....the verbatims come this morning....I will immediatly post my results..in the mean time I will reset imgburn like you requested and enable the force hypertuning option ONLY..... I'm not sure I understand why I don't need burner max though? by using a vertabim disc will imgburn allow the full burning to 8.7g without burner max? it that right? Edited October 21, 2015 by raptor1015
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now