IMGBurn (2.5.8.0) erratic and very low read/verify speed

[hsors]

Hello,

 

I'm in trouble with the very low (and erratic speed that is drive is spinning up and down) while reading/veryfying DVD disks on a new install of ImgBurn 2.5.8.0 on my new computer (DVD drive beeing ASUS DRW-24F1MT (ATAPI device on Port 3 with a SATA transfer rate of 1.5 Gb/s).

I ahve the same problem with all DVDs I tested as well as during a verification process after a successfull burn

Log is below (I stopped the process about 4 minutes after starting the reading process)

Any idea ?

 

Regards

 

Hervé 

 

I 18:28:38 Initialising SPTI...

I 18:28:38 Searching for SCSI / ATAPI devices...

I 18:28:38 -> Drive 1 - Info: ASUS DRW-24F1MT 1.00 (E:) (SATA)

I 18:28:38 Found 1 DVD±RW/RAM!

I 18:28:51 Operation Started!

I 18:28:51 Source Device: [0:0:0] ASUS DRW-24F1MT 1.00 (E:) (SATA)

I 18:28:51 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: TYG03)

I 18:28:51 Source Media Supported Read Speeds: 4x, 6x, 8x, 12x, 14x

I 18:28:51 Source Media Supported Write Speeds: 4x, 6x, 8x, 10x, 12x, 14x, 16x, 18x, 20x, 22x, 24x

I 18:28:51 Source Media Sectors: 1 439 472 (Track Path: PTP)

I 18:28:51 Source Media Size: 2 948 038 656 bytes

I 18:28:51 Source Media Volume Identifier: 1521JECP

I 18:28:51 Source Media Application Identifier: Roxio Burn Engine 3.0

I 18:28:51 Source Media File System(s): ISO9660, Joliet

I 18:28:51 Read Speed (Data/Audio): MAX / MAX

I 18:28:51 Destination File: D:\DVD\ImgBurnOutput\1521JECP.ISO

I 18:28:51 Destination Free Space: 468 513 792 000 Bytes (457 533 000.00 KiB) (446 809.57 MiB) (436.34 GiB)

I 18:28:51 Destination File System: NTFS

I 18:28:51 File Splitting: Auto

I 18:28:52 Read Speed - Effective: 6x - 14x

I 18:28:52 Reading Session 1 of 1... (1 Track, LBA: 0 - 1439471)

I 18:28:52 Reading Track 1 of 1... (MODE1/2048, LBA: 0 - 1439471)

I 18:32:38 Abort Request Acknowledged

E 18:32:38 Failed to Read Sectors!

E 18:32:39 Operation Aborted! - Duration: 00:03:46

E 18:32:39 Average Read Rate: 71 KiB/s (0.1x) - Maximum Read Rate: 71 KiB/s (0.1x)

 

===============================================

Filter Driver Load Order - ImgBurn v2.5.8.0

===============================================

 

Upper Device Filter:  [None Found]

 Upper Class Filter:  [None Found]

             Device:  CD/DVD-ROM Device

 Lower Class Filter:  iaStorF

Lower Device Filter:  [None Found]

 

        Filter Name:  iaStorF

          File Name:  C:\Windows\system32\DRIVERS\iaStorF.sys

       File Version:  13.1.0.1058

   File Description:  Intel® Rapid Storage Technology Filter driver - x64

       Product Name:  Intel® Rapid Storage Technology Filter driver 

    Product Version:  13.1.0.1058

       Company Name:  Intel Corporation

          Copyright:  Copyright ©, Intel Corporation. All rights reserved. 

 

Edit: the problem doesn't occur when manually selecting read speed to 14x / 14x or below, although capabilities are well above that (up to 56x) . Above that (and at MAX setting) the drive is cycling at very low speeds as mentionned above 

Edited November 25, 2015 by hsors