stefano65 Posted November 30, 2015 Share Posted November 30, 2015 Hi, I need help because I'm trying to burn a blu-ray disc but, selecting the "test mode", gives me an error message that can not understand: I/O ErrorDevice (0.0.0) SONY BDRW BWU-100A 1.0c (E:) (USB)Scsi Status: 0x02Interpretation: Check ConditionCDB: AA 00 00 00 0C C0 00 00 00 20 40 00Interpretation Write(12) – Sectors 3264-3295Sense Area: F1 00 04 00 00 00 00 0A 00 3C 06 31 09 90 00 00 00 00SK Interpretation: Hardware ErrorASC/ASCQ Interpretation: Unknowm (ASC: 0x09, ASCQ: 0x90) What could be the problem?Thanks in advance for your response and sorry for my english. Link to comment Share on other sites More sharing options...
dbminter Posted November 30, 2015 Share Posted November 30, 2015 Do you have any BD-RE's? I'm guessing you're trying to test a BD-R? If you have any BD-RE's and you tried this test on a BD-R, try a test on a BD-RE. This should isolate if your drive may not like that particular brand of BD-R. If it repeats for both types, it could still be the discs if the manufacturer is the same. If it repeats for both, there's probably something else going on. Link to comment Share on other sites More sharing options...
stefano65 Posted December 1, 2015 Author Share Posted December 1, 2015 Thank you dbminter. I tried with a BD-R (I not have a bd-re). I'll try with a bd-r of another brand and then I'll see the result. Link to comment Share on other sites More sharing options...
Recommended Posts