Jump to content

Recommended Posts

Posted

As near as I can tell the burn succeeded. I can play the resulting DVD and see all the files on it.

 

Interestingly, this problem started simultaneously with an upgrade from Windows 7 to Windows 10. I'd suspect a driver problem but Windows reports it is the latest driver. I'd suspect a firmware problem but it has the latest firmware (I flashed it again just in case of corruption). I'm using single layer Taiyo-Yuden disks, and burned over half of a 100 disk spindle flawlessly before the upgrade.

 

I'm more than a little baffled, and don't know whether to trust ImgBurn at the moment.

 

Log follows.

 

I 20:56:03 ImgBurn Version 2.5.8.0 started!
I 20:56:03 Microsoft Windows 8 Professional x64 Edition (6.2, Build 9200)
I 20:56:03 Total Physical Memory: 16,706,220 KiB  -  Available: 13,499,564 KiB
W 20:56:03 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.
I 20:56:03 Initialising SPTI...
I 20:56:03 Searching for SCSI / ATAPI devices...
I 20:56:03 -> Drive 1 - Info: HL-DT-ST DVDRAM GSA-H62N CL01-T0 (F:) (ATA)
I 20:56:03 -> Drive 2 - Info: HL-DT-ST BD-RE  WH10LS30 1.02-A0 (G:) (ATA)
I 20:56:03 Found 1 DVD±RW/RAM and 1 BD-RE!
I 20:56:49 Operation Started!
I 20:56:49 Building Image Tree...
I 20:56:51 Checking Directory Depth...
I 20:56:51 Calculating Totals...
I 20:56:51 Preparing Image...
I 20:56:51 Checking Path Length...
I 20:56:51 Contents: 13 Files, 2 Folders
I 20:56:51 Content Type: DVD Video
I 20:56:51 Data Type: MODE1/2048
I 20:56:51 File System(s): ISO9660, UDF (1.02)
I 20:56:51 Volume Label: UNDEFINED
I 20:56:51 IFO/BUP 32K Padding: Enabled
I 20:56:51 Region Code: 1, 2, 3, 4, 5, 6, 7, 8
I 20:56:51 TV System: NTSC
I 20:56:51 Size: 2,552,559,616 bytes
I 20:56:51 Sectors: 1,246,367
I 20:56:51 Image Size: 2,553,151,488 bytes
I 20:56:51 Image Sectors: 1,246,656
I 20:56:53 Operation Successfully Completed! - Duration: 00:00:03
I 20:56:53 Operation Started!
I 20:56:53 Source File: -==/\/[bUILD IMAGE]\/\==-
I 20:56:53 Source File Sectors: 1,246,656 (MODE1/2048)
I 20:56:53 Source File Size: 2,553,151,488 bytes
I 20:56:53 Source File Volume Identifier: UNDEFINED
I 20:56:53 Source File Volume Set Identifier: 482CA718001305BA
I 20:56:53 Source File Application Identifier: IMGBURN V2.5.8.0 - THE ULTIMATE IMAGE BURNER!
I 20:56:53 Source File Implementation Identifier: ImgBurn
I 20:56:53 Source File File System(s): ISO9660, UDF (1.02)
I 20:56:53 Destination Device: [3:15:0] HL-DT-ST BD-RE  WH10LS30 1.02 (G:) (ATA)
I 20:56:53 Destination Media Type: DVD+R (Disc ID: YUDEN000-T02-00)
I 20:56:53 Destination Media Supported Write Speeds: 4x, 8x
I 20:56:53 Destination Media Sectors: 2,295,104
I 20:56:53 Write Mode: DVD
I 20:56:53 Write Type: DAO
I 20:56:53 Write Speed: 4x
I 20:56:53 DVD+R Reserve Track: No
I 20:56:53 Link Size: Auto
I 20:56:53 Lock Volume: Yes
I 20:56:53 Test Mode: No
I 20:56:53 OPC: No
I 20:56:53 BURN-Proof: Enabled
I 20:56:53 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)
I 20:56:53 Book Type Setting: DVD-ROM
I 20:56:53 Filling Buffer... (80 MiB)
I 20:56:54 Writing LeadIn...
I 20:57:10 Writing Session 1 of 1... (1 Track, LBA: 0 - 1246655)
I 20:57:10 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 1246655)
I 21:04:56 Synchronising Cache...
I 21:04:57 Closing Track...
I 21:04:59 Finalising Disc...
I 21:05:42 Exporting Graph Data...
I 21:05:42 Graph Data File: C:\Users\pjcamp\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_WH10LS30_1.02_TUESDAY-JANUARY-12-2016_8-56_PM_YUDEN000-T02-00_4x.ibg
I 21:05:42 Export Successfully Completed!
I 21:05:42 Operation Successfully Completed! - Duration: 00:08:49
I 21:05:42 Average Write Rate: 5,361 KiB/s (4.0x) - Maximum Write Rate: 5,461 KiB/s (4.0x)
I 21:05:42 Cycling Tray before Verify...
I 21:05:50 Device Ready!
E 21:05:50 CompareImageFileLayouts Failed! - Session Count Not Equal (1/0)
E 21:05:50 Verify Failed! - Reason: Layouts do not match.
 

Posted

ImgBurn isn't going to lie to you. If it says something isn't right, then at that moment in time, something wasn't right.

My guess is that having ejected and reloaded the disc, your drive failed to initialise it properly and probably just reported it as being empty - hence the reason it told you the session count wasn't equal. It expected the drive to report the disc had 1 session, but it told it there were 0 sessions.

 

There's nothing to say that it won't then work fine if you eject and reinsert it a second time or if you try to access the disc in another drive.

 

Have you tried burning at 8x instead or cleaning the drive with a cleaning disc?

Posted

I've tried 8x. I dialed it down to 4x just to see if that helped. I have to find my cleaning disc and then I'll try that.

 

I think your guess is probably right. After a few times I noticed the error message came up immediately after the tray cycle between write and verify.

Posted

OK, now, it baffles me why when I put a blank disc in Imgburn claims it is not empty until I close and restart Imgburn.

Posted

It is reporting this:

 

HL-DT-ST BD-RE  WH10LS30 1.02 (ATA)
Current Profile: DVD+R DL

Disc Information:
Status: Complete
State of Last Session: Complete
Erasable: No
Sessions: 1
Sectors: 3,979,296
Size: 8,149,598,208 bytes
Time: 884:19:21 (MM:SS:FF)
MID: MKM-003-00
Supported Write Speeds: 4x, 8x

DVD±R DL Boundary Information:
L0 Data Zone Capacity: 1,989,648
Changeable: No

TOC Information:
Session 1... (LBA: 0)
-> Track 01  (Mode 1, LBA: 0 - 3979295)
-> LeadOut  (LBA: 3979296)

Disc Control Blocks Information:
WH10LS30

Physical Format Information (Last Recorded - L0):
Disc ID: MKM-003-00
Book Type: DVD-ROM
Part Version: 1
Disc Size: 120 mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,186,255

Physical Format Information (Last Recorded - L1):
Disc ID: MKM-003-00
Book Type: DVD-ROM
Part Version: 1
Disc Size: 120 mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,186,255

Layer Information:
Layer 0 Sectors: 1,989,648 (50%)
Layer 1 Sectors: 1,989,648 (50%)

Performance (Write Speed):
Descriptor 1...
-> B0: 0x02, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 3979295 (0x003CB81F)
-> RS: 10,863 KB/s (8x) - WS: 5,540 KB/s (4x)
Descriptor 2...
-> B0: 0x02, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 3979295 (0x003CB81F)
-> RS: 10,863 KB/s (8x) - WS: 11,080 KB/s (8x)
 

Posted

But it IS blank. It is retaining the info from the previous burn after the burned disc has been replaced with a blank one.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.