Playback issue at layer change

[crispy81]

Has anyone else encountered this before? I burn my iso movie file to a BD-R RE DL, Verbatim of course, and it completes fine. The issue is playback, at the layer change it stops and sometimes will continue on a whole chapter afterwards or the Bluray player will stop playback altogether.

 

Not sure if it's a known issue or I'm doing something wrong.

 

Any suggestions appreciated.

 

cheers.

 

 

 

[LIGHTNING UK!]

I'd say it's just having trouble reading the disc.

[crispy81]

I'd say it's just having trouble reading the disc.

 

Could well be the case. I don't have another blank bluray disc to test it. but every movie I burn that is a large iso does the same thing. Bluray player has the latest firmware... shame, I like Samsung Bluray players.

Edited January 23, 2016 by crispy81

[LIGHTNING UK!]

Does the disc verify ok after the burn or have you disabled that step? It would be nice to see the log.

[crispy81]

Does the disc verify ok after the burn or have you disabled that step? It would be nice to see the log.

 

I tried the verify disc after burning the image and it failed.. Here's the log.

 

I 11:00:26 ImgBurn Version 2.5.8.0 started!

I 11:00:26 Microsoft Windows 8 Professional x64 Edition (6.2, Build 9200)

I 11:00:26 Total Physical Memory: 8,354,956 KiB  -  Available: 4,045,784 KiB

I 11:00:26 Initialising SPTI...

I 11:00:26 Searching for SCSI / ATAPI devices...

I 11:00:26 -> Drive 1 - Info: PIONEER BD-RW   BDR-208D 1.50-ID61 (G:) (SATA)

I 11:00:26 -> Drive 2 - Info: DTSOFT BDROM 1.05 (H:) (Virtual)

I 11:00:26 Found 1 BD-ROM and 1 BD-RE!

I 11:01:25 Operation Started!

I 11:01:25 Source File: F:\captain.america.the.winter.soldier.2014.complete.bluray-lazers.iso

I 11:01:25 Source File Sectors: 23,309,408 (MODE1/2048)

I 11:01:25 Source File Size: 47,737,667,584 bytes

I 11:01:25 Source File Volume Identifier: CAPTAIN_AMERICA_THE_WINTER_SO_BD

I 11:01:25 Source File Volume Set Identifier: 45012DA50163A9B7

I 11:01:25 Source File Application Identifier: ImgBurn v2.5.8.0

I 11:01:25 Source File Implementation Identifier: ImgBurn

I 11:01:25 Source File File System(s): UDF (2.50)

I 11:01:25 Destination Device: [1:0:0] PIONEER BD-RW   BDR-208D 1.50 (G:) (SATA)

I 11:01:25 Destination Media Type: BD-RE (Disc ID: TDKBLD-Wfa-000)

I 11:01:25 Destination Media Supported Write Speeds: 2x

I 11:01:25 Destination Media Sectors: 24,438,784

I 11:01:25 Write Mode: BD

I 11:01:25 Write Type: DAO

I 11:01:25 Write Speed: 2x

I 11:01:25 Hardware Defect Management Active: No

I 11:01:25 BD-RE FastWrite: No

I 11:01:25 Link Size: Auto

I 11:01:25 Lock Volume: Yes

I 11:01:25 Test Mode: No

I 11:01:25 OPC: No

I 11:01:25 BURN-Proof: Enabled

I 11:01:26 Write Speed Successfully Set! - Effective: 8,990 KB/s (2x)

I 11:01:26 Advanced Settings - Optimal Writing Speed: No

I 11:01:26 Filling Buffer... (80 MiB)

I 11:01:27 Writing LeadIn...

I 11:01:40 Writing Session 1 of 1... (1 Track, LBA: 0 - 23309407)

I 11:01:40 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 23309407)

I 11:01:40 Writing Layer 0... (LBA: 0 - 12219391)

I 11:48:29 Writing Layer 1... (LBA: 12219392 - 23309407)

I 12:30:57 Synchronising Cache...

I 12:30:58 Exporting Graph Data...

I 12:30:58 Graph Data File: C:\Users\Home\AppData\Roaming\ImgBurn\Graph Data Files\PIONEER_BD-RW_BDR-208D_1.50_SUNDAY-JANUARY-24-2016_11-01_AM_TDKBLD-Wfa-000_2x.ibg

I 12:30:58 Export Successfully Completed!

I 12:30:58 Operation Successfully Completed! - Duration: 01:29:32

I 12:30:58 Average Write Rate: 8,704 KiB/s (2.0x) - Maximum Write Rate: 8,832 KiB/s (2.0x)

I 12:30:58 Cycling Tray before Verify...

W 12:31:08 Waiting for device to become ready...

I 12:31:40 Device Ready!

I 12:31:40 Operation Started!

I 12:31:40 Source Device: [1:0:0] PIONEER BD-RW   BDR-208D 1.50 (G:) (SATA)

I 12:31:40 Source Media Type: BD-RE (Disc ID: TDKBLD-Wfa-000)

I 12:31:40 Source Media Supported Read Speeds: 6x

I 12:31:40 Source Media Supported Write Speeds: 2x

I 12:31:40 Source Media Sectors: 24,438,784

I 12:31:40 Source Media Size: 50,050,629,632 bytes

I 12:31:40 Image File: F:\captain.america.the.winter.soldier.2014.complete.bluray-lazers.iso

I 12:31:40 Image File Sectors: 23,309,408 (MODE1/2048)

I 12:31:40 Image File Size: 47,737,667,584 bytes

I 12:31:40 Image File Volume Identifier: CAPTAIN_AMERICA_THE_WINTER_SO_BD

I 12:31:40 Image File Volume Set Identifier: 45012DA50163A9B7

I 12:31:40 Image File Application Identifier: ImgBurn v2.5.8.0

I 12:31:40 Image File Implementation Identifier: ImgBurn

I 12:31:40 Image File File System(s): UDF (2.50)

I 12:31:40 Read Speed (Data/Audio): MAX / MAX

I 12:31:42 Read Speed - Effective: 2.5x - 6x

I 12:31:42 Verifying Session 1 of 1... (1 Track, LBA: 0 - 23309407)

I 12:31:42 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 23309407)

I 12:31:42 Verifying Layer 0... (LBA: 0 - 12219391)

I 12:53:31 Verifying Layer 1... (LBA: 12219392 - 23309407)

W 12:53:37 Failed to Read Sectors 12219488 - 12219519 - Reason: L-EC Uncorrectable Error

W 12:53:43 Failed to Read Sector 12219488 - Reason: L-EC Uncorrectable Error

W 12:53:43 Sector 12219488 maps to File: \BDMV\STREAM0101.m2ts

W 12:54:05 Retrying (1)...

W 12:54:10 Retry Failed - Reason: L-EC Uncorrectable Error

W 13:20:39 Retrying (2)...

W 13:20:44 Retry Failed - Reason: L-EC Uncorrectable Error

W 13:20:46 Failed to Read Sector 12219488 - Reason: L-EC Uncorrectable Error

W 13:20:46 Sector 12219488 maps to File: \BDMV\STREAM0101.m2ts

W 13:20:51 Failed to Read Sector 12219489 - Reason: L-EC Uncorrectable Error

W 13:20:51 Sector 12219489 maps to File: \BDMV\STREAM0101.m2ts

E 13:20:54 Failed to Read Sector 12219489 - Reason: L-EC Uncorrectable Error

E 13:20:54 Sector 12219489 maps to File: \BDMV\STREAM0101.m2ts

E 13:20:54 Failed to Verify Sectors!

I 13:20:55 Exporting Graph Data...

I 13:20:55 Graph Data File: C:\Users\Home\AppData\Roaming\ImgBurn\Graph Data Files\PIONEER_BD-RW_BDR-208D_1.50_SUNDAY-JANUARY-24-2016_11-01_AM_TDKBLD-Wfa-000_2x.ibg

I 13:20:55 Export Successfully Completed!

E 13:20:55 Operation Failed! - Duration: 00:49:13

I 13:20:55 Average Verify Rate: 8,278 KiB/s (1.9x) - Maximum Verify Rate: 26,615 KiB/s (6.1x)

I 13:21:00 Close Request Acknowledged

I 13:21:00 Closing Down...

I 13:21:00 Shutting down SPTI...

I 13:21:00 ImgBurn closed!

 

 

Edited January 24, 2016 by crispy81

[crispy81]

It seems to be happening on all images I burn to Verbatim BD-RE. Not game to try it on a normal BD-R DL and waste a disc.

 

I don't know if it's the disc or the drive. I need to get another couple of rewritables to test and if they all do it, it must be my pioneer burner. Burner has the latest firmware Pioneer has released.

[LIGHTNING UK!]

It's nothing to do with what you're burning to the disc, the disc itself is just unreadable after the burn.

 

How many of the BD-RE disc have you got / tried?

 

It might be worth doing a full format on it and see if the same thing happens.

 

Until you burn and verify a disc without any issues, I'd forget about worrying about it playing back or not.

[crispy81]

Oh, whatever image I burn plays fine, until the layer change, where it freezes, and when it finally reads again, it's jumped a whole chapter ahead and then stutters for a bit then comes good again.