burnitgood Posted July 4, 2016 Posted July 4, 2016 Hi, I've been having problems burning to bluray Dual layer rewritable discs. My burner is an "LG HL-DT-ST BD-RE WH14NS40" The bluray disc is "Verbatim BD-RE DL for video 50GB 2x I just updated my firmware to the current version 1.03 to try and fix the problem but still have the error. It completes the burning but when verifying, the I/O error pops up at 51-52% complete. Looks like the error starts at the first sector of the second layer of the blu ray disk. I've had no issues with burning a single layer BD-R 25GB Any Ideas? thanks Here is the log: I 20:29:05 ImgBurn Version 2.5.8.0 started!I 20:29:05 Microsoft Windows 8 Core x64 Edition (6.2, Build 9200)I 20:29:05 Total Physical Memory: 16,664,640 KiB - Available: 14,595,148 KiBI 20:29:05 Initialising SPTI...I 20:29:05 Searching for SCSI / ATAPI devices...I 20:29:05 -> Drive 1 - Info: HL-DT-ST BD-RE WH14NS40 1.03-A0 (D:) (SATA)I 20:29:05 Found 1 BD-RE XL! I 20:33:24 Operation Started!I 20:33:24 Building Image Tree...I 20:33:24 Checking Directory Depth...I 20:33:24 Calculating Totals...I 20:33:24 Preparing Image...I 20:33:25 Checking Path Length...E 20:33:26 Current media does not support the 'MODE2/FORM1/2352' data type.E 20:33:26 Operation Failed! - Duration: 00:00:02I 20:33:39 Operation Started!I 20:33:39 Building Image Tree...I 20:33:39 Checking Directory Depth...I 20:33:39 Calculating Totals...I 20:33:39 Preparing Image...I 20:33:39 Checking Path Length...W 20:33:41 Data type changed to 'MODE1/2048' due to current media.I 20:33:41 Contents: 229 Files, 39 FoldersI 20:33:41 Content Type: DataI 20:33:41 Data Type: MODE1/2048I 20:33:41 File System(s): ISO9660, UDF (1.02)I 20:33:41 Volume Label: SHOWSAI 20:33:41 Size: 47,646,260,458 bytesI 20:33:41 Sectors: 23,264,904I 20:33:41 Image Size: 47,647,817,728 bytesI 20:33:41 Image Sectors: 23,265,536I 20:33:48 Operation Successfully Completed! - Duration: 00:00:09I 20:33:48 Operation Started!I 20:33:48 Source File: -==/\/[bUILD IMAGE]\/\==-I 20:33:48 Source File Sectors: 23,265,536 (MODE1/2048)I 20:33:48 Source File Size: 47,647,817,728 bytesI 20:33:48 Source File Volume Identifier: SHOWSAI 20:33:48 Source File Volume Set Identifier: 48E3A433016300F1I 20:33:48 Source File Application Identifier: IMGBURN V2.5.8.0 - THE ULTIMATE IMAGE BURNER!I 20:33:48 Source File Implementation Identifier: ImgBurnI 20:33:48 Source File File System(s): ISO9660, UDF (1.02)I 20:33:48 Destination Device: [0:0:0] HL-DT-ST BD-RE WH14NS40 1.03 (D:) (SATA)I 20:33:48 Destination Media Type: BD-RE (Disc ID: VERBAT-IM1-000)I 20:33:48 Destination Media Supported Write Speeds: 2xI 20:33:48 Destination Media Sectors: 24,438,784I 20:33:48 Write Mode: BDI 20:33:48 Write Type: DAOI 20:33:48 Write Speed: 2xI 20:33:48 Hardware Defect Management Active: NoI 20:33:48 BD-RE FastWrite: NoI 20:33:48 Link Size: AutoI 20:33:48 Lock Volume: YesI 20:33:48 Test Mode: NoI 20:33:48 OPC: NoI 20:33:48 BURN-Proof: EnabledI 20:33:48 Write Speed Successfully Set! - Effective: 8,992 KB/s (2x)I 20:33:49 Filling Buffer... (80 MiB)I 20:33:49 Writing LeadIn...I 20:34:03 Writing Session 1 of 1... (1 Track, LBA: 0 - 23265535)I 20:34:03 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 23265535)I 20:34:03 Writing Layer 0... (LBA: 0 - 12219391)W 21:17:57 Waiting for buffers to recover... (LBA: 11618112)W 21:18:08 Waiting for hard disk activity to reach threshold level...I 21:20:14 Writing Sectors...W 21:22:02 Waiting for buffers to recover... (LBA: 12057824)W 21:22:13 Waiting for hard disk activity to reach threshold level...I 21:22:27 Writing Sectors...I 21:23:04 Writing Layer 1... (LBA: 12219392 - 23265535)W 21:24:01 Waiting for buffers to recover... (LBA: 12455936)W 21:24:16 Waiting for hard disk activity to reach threshold level...I 21:24:18 Writing Sectors...I 22:05:07 Synchronising Cache...I 22:05:09 Exporting Graph Data...I 22:05:09 Graph Data File: C:\Users\Durban\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_WH14NS40_1.03_JULY-3-2016_8-33_PM_VERBAT-IM1-000_2x.ibgI 22:05:09 Export Successfully Completed!I 22:05:09 Operation Successfully Completed! - Duration: 01:31:20I 22:05:09 Average Write Rate: 8,517 KiB/s (1.9x) - Maximum Write Rate: 9,515 KiB/s (2.2x)I 22:05:09 Cycling Tray before Verify...W 22:05:16 Waiting for device to become ready...I 22:05:35 Device Ready!I 22:05:45 Operation Started!I 22:05:45 Source Device: [0:0:0] HL-DT-ST BD-RE WH14NS40 1.03 (D:) (SATA)I 22:05:45 Source Media Type: BD-RE (Disc ID: VERBAT-IM1-000)I 22:05:45 Source Media Supported Read Speeds: 2xI 22:05:45 Source Media Supported Write Speeds: 2xI 22:05:45 Source Media Sectors: 24,438,784I 22:05:45 Source Media Size: 50,050,629,632 bytesI 22:05:45 Image File: -==/\/[bUILD IMAGE]\/\==-I 22:05:45 Image File Sectors: 23,265,536 (MODE1/2048)I 22:05:45 Image File Size: 47,647,817,728 bytesI 22:05:45 Image File Volume Identifier: SHOWSAI 22:05:45 Image File Volume Set Identifier: 48E3A433016300F1I 22:05:45 Image File Application Identifier: IMGBURN V2.5.8.0 - THE ULTIMATE IMAGE BURNER!I 22:05:45 Image File Implementation Identifier: ImgBurnI 22:05:45 Image File File System(s): ISO9660, UDF (1.02)I 22:05:45 Read Speed (Data/Audio): MAX / MAXI 22:05:46 Read Speed - Effective: 2xI 22:05:46 Verifying Session 1 of 1... (1 Track, LBA: 0 - 23265535)I 22:05:46 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 23265535)I 22:05:46 Verifying Layer 0... (LBA: 0 - 12219391)I 22:51:58 Verifying Layer 1... (LBA: 12219392 - 23265535)W 22:52:13 Failed to Read Sectors 12219392 - 12219423 - Reason: L-EC Uncorrectable ErrorW 22:52:21 Failed to Read Sector 12219392 - Reason: L-EC Uncorrectable ErrorW 22:52:21 Sector 12219392 maps to File: \Rosewood Season 1\Rosewood.S01E02.Vostfr--www.libre-partage.com.avi
LIGHTNING UK! Posted July 4, 2016 Posted July 4, 2016 Pretty much the only things you could try are enabling the 'Perform OPC Before Write' option in the Settings and just fully formatting the disc a few more times. Maybe it'll sort itself out. After that, it's a case of trying different discs or a different drive.
burnitgood Posted July 4, 2016 Author Posted July 4, 2016 I just tried perform OPC ...still no luck. I'll try a new disc and full erase it a few times and see what happens. I can confirm though...using the same disc...if I burn the 50GB dual layer disc with only 25GBcovering one layer, it works fine.
burnitgood Posted July 5, 2016 Author Posted July 5, 2016 (edited) Success. When I turn off these 3 write options (in the image attached), the BD-RE DL burns and verifies successfully on both layers. This was done right after a failed burn without erasing the disc.Not sure if all 3 need to be unchecked, but it worked. and here's the log: I 05:48:49 Operation Started!I 05:48:49 Building Image Tree...I 05:48:49 Checking Directory Depth...I 05:48:49 Calculating Totals...I 05:48:49 Preparing Image...I 05:48:50 Checking Path Length...W 05:48:52 Data type changed to 'MODE1/2048' due to current media.I 05:48:52 Contents: 175 Files, 35 FoldersI 05:48:52 Content Type: DataI 05:48:52 Data Type: MODE1/2048I 05:48:52 File System(s): ISO9660, UDF (1.02)I 05:48:52 Volume Label: SHOWSAI 05:48:52 Size: 42,886,366,780 bytesI 05:48:52 Sectors: 20,940,710I 05:48:52 Image Size: 42,887,741,440 bytesI 05:48:52 Image Sectors: 20,941,280I 05:48:53 Operation Successfully Completed! - Duration: 00:00:04I 05:48:53 Operation Started!I 05:48:53 Source File: -==/\/[bUILD IMAGE]\/\==-I 05:48:53 Source File Sectors: 20,941,280 (MODE1/2048)I 05:48:53 Source File Size: 42,887,741,440 bytesI 05:48:53 Source File Volume Identifier: SHOWSAI 05:48:53 Source File Volume Set Identifier: 48E52E18013F89CAI 05:48:53 Source File Application Identifier: IMGBURN V2.5.8.0 - THE ULTIMATE IMAGE BURNER!I 05:48:53 Source File Implementation Identifier: ImgBurnI 05:48:53 Source File File System(s): ISO9660, UDF (1.02)I 05:48:53 Destination Device: [0:0:0] HL-DT-ST BD-RE WH14NS40 1.03 (D:) (SATA)I 05:48:53 Destination Media Type: BD-RE (Disc ID: VERBAT-IM1-000)I 05:48:53 Destination Media Supported Write Speeds: 2xI 05:48:53 Destination Media Sectors: 24,438,784I 05:48:53 Write Mode: BDI 05:48:53 Write Type: DAOI 05:48:53 Write Speed: 2xI 05:48:53 Hardware Defect Management Active: NoI 05:48:53 BD-RE FastWrite: NoI 05:48:53 Link Size: AutoI 05:48:53 Lock Volume: YesI 05:48:53 Test Mode: NoI 05:48:53 OPC: YesI 05:48:53 BURN-Proof: EnabledI 05:48:54 Write Speed Successfully Set! - Effective: 8,992 KB/s (2x)I 05:49:07 Filling Buffer... (80 MiB)I 05:49:08 Writing LeadIn...I 05:49:10 Writing Session 1 of 1... (1 Track, LBA: 0 - 20941279)I 05:49:10 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 20941279)I 05:49:10 Writing Layer 0... (LBA: 0 - 12219391)I 06:35:18 Writing Layer 1... (LBA: 12219392 - 20941279)I 07:08:15 Synchronising Cache...I 07:08:16 Exporting Graph Data...I 07:08:16 Graph Data File:I 07:08:16 Export Successfully Completed!I 07:08:16 Operation Successfully Completed! - Duration: 01:19:22I 07:08:16 Average Write Rate: 8,828 KiB/s (2.0x) - Maximum Write Rate: 8,869 KiB/s (2.0x)I 07:08:16 Cycling Tray before Verify...W 07:08:24 Waiting for device to become ready...I 07:08:44 Device Ready!I 07:08:47 Operation Started!I 07:08:47 Source Device: [0:0:0] HL-DT-ST BD-RE WH14NS40 1.03 (D:) (SATA)I 07:08:48 Source Media Type: BD-RE (Disc ID: VERBAT-IM1-000)I 07:08:48 Source Media Supported Read Speeds: 2x, 4.2x, 6.2xI 07:08:48 Source Media Supported Write Speeds: 2xI 07:08:48 Source Media Sectors: 24,438,784I 07:08:48 Source Media Size: 50,050,629,632 bytesI 07:08:48 Image File: -==/\/[bUILD IMAGE]\/\==-I 07:08:48 Image File Sectors: 20,941,280 (MODE1/2048)I 07:08:48 Image File Size: 42,887,741,440 bytesI 07:08:48 Image File Volume Identifier: SHOWSAI 07:08:48 Image File Volume Set Identifier: 48E52E18013F89CAI 07:08:48 Image File Application Identifier: IMGBURN V2.5.8.0 - THE ULTIMATE IMAGE BURNER!I 07:08:48 Image File Implementation Identifier: ImgBurnI 07:08:48 Image File File System(s): ISO9660, UDF (1.02)I 07:08:48 Read Speed (Data/Audio): MAX / MAXI 07:08:49 Read Speed - Effective: 2.6x - 6.2x, 6.2x - 2.6xI 07:08:49 Verifying Session 1 of 1... (1 Track, LBA: 0 - 20941279)I 07:08:49 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 20941279)I 07:08:49 Verifying Layer 0... (LBA: 0 - 12219391)I 07:29:57 Verifying Layer 1... (LBA: 12219392 - 20941279)I 08:02:54 Exporting Graph Data...I 08:02:54 Graph Data File:I 08:02:54 Export Successfully Completed!I 08:02:54 Operation Successfully Completed! - Duration: 00:54:05I 08:02:54 Average Verify Rate: 12,914 KiB/s (2.9x) - Maximum Verify Rate: 27,300 KiB/s (6.2x) Edited July 5, 2016 by burnitgood
burnitgood Posted July 6, 2016 Author Posted July 6, 2016 The 3 options unchecked in the write settings were: Prefer format with full certification Prefer format without spare areas Prefer properly formatted discs
LIGHTNING UK! Posted July 6, 2016 Posted July 6, 2016 They only do anything if you actually do a full erase on the disc. I think you just got lucky with that one.
burnitgood Posted July 6, 2016 Author Posted July 6, 2016 you're right, I just got lucky. I can't replicate the successful burn.
Recommended Posts