Failure to Read Sectors 0-31 Error

[jtatpdx]

​I keep getting the following error. Any ideas?

 

I 21:14:56 Searching for SCSI / ATAPI devices...
I 21:14:57 -> Drive 1 - Info: HL-DT-ST DVDRAM GP60NB60 LI02-24 (D:) (USB 2.0)
I 21:14:57 Found 1 DVD±RW/RAM!
I 21:24:09 Operation Started!
I 21:24:09 Source Device: [0:0:0] HL-DT-ST DVDRAM GP60NB60 LI02 (D:) (USB)
I 21:24:09 Source Media Type: DVD-ROM (Book Type: DVD-ROM)
I 21:24:09 Source Media Supported Read Speeds: 2x, 4x, 6x, 8x
I 21:24:09 Source Media Sectors: 3,139,856 (Track Path: OTP - L0: 1,624,752 - L1: 1,515,104)
I 21:24:09 Source Media Size: 6,430,425,088 bytes
I 21:24:09 Source Media Volume Identifier: MENTAL_MATH_DVD_1
I 21:24:09 Source Media Volume Set Identifier: 562EA0A0APPLEDSPMENTAL_MATH_DVD_1
I 21:24:09 Source Media Application Identifier: DVD Studio Pro:4.2.2, DSPInterface:431.40, DVDAuthoring:428.45, DVDBase:468.61(Encoder: 614), Oxygene:427.3
I 21:24:09 Source Media Implementation Identifier: Apple Computer, Inc.
I 21:24:09 Source Media File System(s): ISO9660, UDF (1.02)
I 21:24:09 Read Speed (Data/Audio): MAX / 8x
I 21:24:09 Destination File: C:\Users\jtatpdx\Documents\MENTAL_MATH_DVD_1.ISO
I 21:24:09 Destination Free Space: 206,654,881,792 Bytes (201,811,408.00 KiB) (197,081.45 MiB) (192.46 GiB)
I 21:24:09 Destination File System: NTFS
I 21:24:09 File Splitting: Auto
I 21:24:11 Read Speed - Effective: 3.3x - 8x, 8x - 3.3x
I 21:24:12 Reading Session 1 of 1... (1 Track, LBA: 0 - 3139855)
I 21:24:12 Reading Track 1 of 1... (MODE1/2048, LBA: 0 - 3139855)
I 21:24:12 Reading Layer 0... (LBA: 0 - 1624751)
W 21:24:13 Failed to Read Sectors 0 - 31 - Reason: The specified network resource or device is no longer available.
W 21:24:13 Waiting for device to become ready...
W 21:24:14 Device Removal Detected!
W 21:24:14 The device list will be refreshed at the next available opportunity.
W 21:24:19 Device Removal Detected!
W 21:24:19 The device list will be refreshed at the next available opportunity.
W 21:24:23 Device Removal Detected!
W 21:24:23 The device list will be refreshed at the next available opportunity.
 

[LIGHTNING UK!]

Your drive vanished from the system.

 

Bad cable / connection?

[dbminter]

And there are apparently just reasons where drives randomly disappear from the system.  I've got one where if there's a sudden power fluctuation, like if the heater or air conditioner comes on, my system goes through an entire rescan of all USB connected devices.  But ONLY if my Brother printer is attached.  It doesn't do that if the USB cable from my printer is disconnected.

 

 

I also had one where AnyDVD didn't like the drive being connected.  After a little bit or reading, it would "lose" the fact that the drive was there, even though Windows/ImgBurn still detected it.

 

 

However, I'd first try replacing the USB data cable.  Start with the easiest to diagnose probabilities first.  Then, I'd try a different USB port, preferably not in the same location, e.g. if it's in the back, try any in the front, etc.