halo5 Posted November 17, 2016 Share Posted November 17, 2016 Image burn has burned properly but when I look at the disk it only has burned halfway because I can see a line after halfway and between it is nothing there no burn at all, is this normal or is image burn not burned the disk properly, all the logs fine no problem at all, except it said attempting to under burn with a amber sign. also when I tried to verify the disk it said I/o error at 25% can you tell me why thank you Link to comment Share on other sites More sharing options...
dbminter Posted November 17, 2016 Share Posted November 17, 2016 Not without a log. Please post the log. Just going by what you've said, is it a BD-R you burned? It is "normal" sometimes for blank spaces to appear in rings on burns of BD-R's I've seen. However, I/O errors in Verify are not. I guess the Verify didn't complete, then, at 25%? Link to comment Share on other sites More sharing options...
halo5 Posted November 17, 2016 Author Share Posted November 17, 2016 Thank you for replying I have used verbatim dvd rl disk The log I can't post because I have already burned disk sorry I'm trying to burn windows 10 what layer break should I use because I think this is giving me under burn thanks Link to comment Share on other sites More sharing options...
dbminter Posted November 17, 2016 Share Posted November 17, 2016 Do you mean DVD+R DL? Or DVD-R DL? You can retrieve the log if it hasn't been deleted. In ImgBurn, open Help and choose ImgBurn Logs. The folder containing the ImgBurn.log file will open where you can open the .LOG file for viewing in a text editor. Just go through the log until you find the failed burn/verify. Then just copy and paste the relevant information. If you did nothing in ImgBurn since you burned that disc/verified it, then the first item in the log will be the failed burn. Until I see a log, just going by what has already been said, I can guess it's probably a DVD+R DL. Even if it's a DVD-R DL, it should still be the same, since you probably bought these discs in a brick and mortar store? Verbatims in brick and mortar stores, or their Life series bought online, are made by CMC Magnetics, the bottom of the barrel optical disc manufacturer. They're responsible for about half of the errors we see on this board. Given you said it failed during a Verify, it wouldn't surprise me if it was a CMC. Or some other cheap disc manufacturer. The only good Verbatim DVD+R DL's are the MKM brand from the DataLife Plus series (NOT the Life series.) that you can only find in online stores. With a log, I could see the Disc ID field to see if it's CMC or some other less reputable manufacturer. Link to comment Share on other sites More sharing options...
halo5 Posted November 18, 2016 Author Share Posted November 18, 2016 i have used verbatim dvd+rl MKM 003 DATALIFE disk this is the log i want to know what the w means saying user accepted disk space warning and is attempting to underburning can you explain thanks ImgBurn Version 2.5.8.0 started!I 10:27:20 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)I 10:27:20 Total Physical Memory: 457,200 KiB - Available: 224,832 KiBI 10:27:20 Initialising SPTI...I 10:27:20 Searching for SCSI / ATAPI devices...E 10:27:20 Failed to check for ImgBurn update!I 10:27:21 -> Drive 1 - Info: ATAPI DVD A DH20A3P XP5T (E:) (ATA)I 10:27:22 -> Drive 2 - Info: ATAPI iHAS524 B AL2A (D:) (ATA)I 10:27:22 Found 2 DVD±RW/RAMs!I 10:30:57 Operation Started!I 10:30:57 Building Image Tree...I 10:31:00 Corrected file system selection for Operating System installation disc.I 10:31:00 Checking Directory Depth...I 10:31:00 Calculating Totals...I 10:31:00 Preparing Image...I 10:31:00 Checking Path Length...I 10:31:00 Contents: 728 Files, 142 FoldersI 10:31:00 Content Type: Operating System InstallationI 10:31:00 Data Type: MODE1/2048I 10:31:00 File System(s): UDF (1.02) (Bootable)I 10:31:00 Volume Label: [Not Configured]I 10:31:01 Size: 2,823,252,614 bytesI 10:31:01 Sectors: 1,378,855I 10:31:01 Image Size: 2,826,567,680 bytesI 10:31:01 Image Sectors: 1,380,160I 10:31:01 Operation Successfully Completed! - Duration: 00:00:03I 10:31:21 Operation Started!I 10:31:21 Building Image Tree...I 10:31:23 Checking Directory Depth...I 10:31:23 Calculating Totals...I 10:31:23 Preparing Image...I 10:31:23 Checking Path Length...I 10:31:23 Contents: 728 Files, 142 FoldersI 10:31:23 Content Type: Operating System InstallationI 10:31:23 Data Type: MODE1/2048I 10:31:23 File System(s): UDF (1.02) (Bootable)I 10:31:23 Volume Label: Windows Vista Ultimate SP2 (32 Bit)I 10:31:23 Size: 2,823,252,614 bytesI 10:31:23 Sectors: 1,378,855I 10:31:23 Image Size: 2,826,567,680 bytesI 10:31:23 Image Sectors: 1,380,160I 10:31:25 Operation Successfully Completed! - Duration: 00:00:03W 10:31:25 User accepted disc space warning and is attempting to underburn!I 10:31:26 Operation Started!I 10:31:26 Source File: -==/\/[bUILD IMAGE]\/\==-I 10:31:26 Source File Sectors: 1,380,160 (MODE1/2048)I 10:31:26 Source File Size: 2,826,567,680 bytesI 10:31:26 Source File Volume Identifier: Windows Vista Ultimate SP2 (32 Bit)I 10:31:26 Source File Volume Set Identifier: 497253EA00150F3CI 10:31:26 Source File Application Identifier: IMGBURN V2.5.8.0 - THE ULTIMATE IMAGE BURNER!I 10:31:26 Source File Implementation Identifier: ImgBurnI 10:31:26 Source File File System(s): ISO9660 (Bootable), UDF (1.02)I 10:31:26 Destination Device: [0:0:0] ATAPI iHAS524 B AL2A (D:) (ATA)I 10:31:26 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00)I 10:31:26 Destination Media Supported Write Speeds: 2.4x, 4x, 6x, 8xI 10:31:26 Destination Media Sectors: 4,267,040I 10:31:26 Destination Media L0 Data Zone Capacity: 2,133,520 (Changeable: Yes)I 10:31:26 Write Mode: DVDI 10:31:26 Write Type: DAOI 10:31:26 Write Speed: 4xI 10:31:26 DVD+R DL Reserve Track: NoI 10:31:26 Link Size: AutoI 10:31:26 Lock Volume: YesI 10:31:26 Test Mode: NoI 10:31:26 OPC: NoI 10:31:26 BURN-Proof: EnabledI 10:31:26 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)I 10:31:26 Book Type Setting: DVD-ROMI 10:31:26 Advanced Settings - Force HT: Yes, Online HT: No, OverSpeed: No, SmartBurn: YesI 10:31:26 CD/DVD Life Record Count: 168 - CD/DVD Record Count: 6I 10:31:26 Optimal L0 Data Zone Capacity: 690,080I 10:31:26 Optimal L0 Data Zone Method: ECC Block BoundaryI 10:31:56 Set L0 Data Zone Capacity Succeeded!I 10:31:56 L0 Data Zone Capacity - Effective: 690,080I 10:31:56 Filling Buffer... (20 MiB)I 10:31:58 Writing LeadIn...I 10:32:00 Writing Session 1 of 1... (1 Track, LBA: 0 - 1380159)I 10:32:00 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 1380159)I 10:32:00 Writing Layer 0... (LBA: 0 - 690079)I 10:36:16 Writing Layer 1... (LBA: 690080 - 1380159)I 10:40:35 Synchronising Cache...I 10:40:39 Closing Track...I 10:40:40 Finalising Disc...I 10:41:17 Exporting Graph Data...I 10:41:17 Graph Data File: C:\Documents and Settings\Home\Application Data\ImgBurn\Graph Data Files\ATAPI_iHAS524_B_AL2A_18-NOVEMBER-2016_10-31_MKM-003-00_4x.ibgI 10:41:17 Export Successfully Completed!I 10:41:17 Operation Successfully Completed! - Duration: 00:09:47I 10:41:17 Average Write Rate: 5,359 KiB/s (4.0x) - Maximum Write Rate: 5,502 KiB/s (4.1x)I 10:41:35 Close Request AcknowledgedI 10:41:35 Closing Down...I 10:41:35 Shutting down SPTI...I 10:41:35 ImgBurn closed! Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted November 18, 2016 Share Posted November 18, 2016 The image (files) you're burning will fit on a single layer disc, you don't need to use a double layer disc. Link to comment Share on other sites More sharing options...
dbminter Posted November 18, 2016 Share Posted November 18, 2016 Like LUK said, the underburning "warning" you got was just to let you know the user accepted the fact that you could burn that image to a single layer disc instead of a double layer disc and chose to burn to a double layer disc. Your image file is, in fact, about half the size of just a single layer disc. And this was the disc that failed to Verfiy? Can you find the part of the log where the Verify failed? Link to comment Share on other sites More sharing options...
halo5 Posted November 18, 2016 Author Share Posted November 18, 2016 Thank you for replying sorry I cant find the verify log file, will the OS still run reinstalling vista on a computer I just want to make sure thanks again Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted November 18, 2016 Share Posted November 18, 2016 Not if verify failed, no. If verify fails, your drive can't read everything on the disc. If it can't read everything, chances are that the OS install will fail. Link to comment Share on other sites More sharing options...
dbminter Posted November 18, 2016 Share Posted November 18, 2016 Thank you for replying sorry I cant find the verify log file, will the OS still run reinstalling vista on a computer I just want to make sure thanks again The Verify portion should be immediately after the log you copied and pasted if you have Verify automatically set to run after a burn. So, it should be there if it was performed. Barring that, you could run a manual Verify. It won't compare against the image file, unless you still have the image file, I guess. It will just perform a Read attempt operation. If you still have the disc, of course. You could try either a Verify or a Read operation. Then copy and paste the log from the log window of the new attempt to Verify or Read. That should give a better view of maybe why it's failing and what to do. If you don't have the DVD+R DL anymore, of course, it's moot. Link to comment Share on other sites More sharing options...
Recommended Posts