Jump to content

Recommended Posts

Posted

Hi,

 

I'm using ImgBurn since years and today is the first time I'm encountering an issue.

 

I was burning an ISO file of a Blu-ray video authoring I made, the 3 first copies went well (MediaRange 1-4x), then I ran out of these BDR, and opened a new stack, same "brand" but totally different "model", MediaRange 6x, and I tried two, and I got the same error at the very beginning.

 

Here are the logs:

 

I 13:56:53 ImgBurn Version 2.5.8.0 started!
I 13:56:53 Microsoft Windows 8 Professional x64 Edition (6.2, Build 9200)
I 13:56:53 Total Physical Memory: 33 463 284 KiB  -  Available: 26 722 188 KiB
I 13:56:53 Initialising SPTI...
I 13:56:53 Searching for SCSI / ATAPI devices...
I 13:56:53 -> Drive 1 - Info: PLEXTOR BD-R   PX-B920SA 1.03 (K:) (SATA)
I 13:56:53 Found 1 HD DVD-ROM/BD-RE!
I 13:57:34 Operation Started!
I 13:57:34 Source File: I:\Teuf & Titia.iso
I 13:57:34 Source File Sectors: 8 009 312 (MODE1/2048)
I 13:57:34 Source File Size: 16 403 070 976 bytes
I 13:57:34 Source File Volume Identifier: Teuf & Titia
I 13:57:34 Source File Volume Set Identifier: 12345678        BDROM
I 13:57:34 Source File Application Identifier: BD Authoring
I 13:57:34 Source File Implementation Identifier: Developer
I 13:57:34 Source File File System(s): UDF (2.50)
I 13:57:34 Destination Device: [0:0:0] PLEXTOR BD-R   PX-B920SA 1.03 (K:) (SATA)
I 13:57:34 Destination Media Type: BD-R (Disc ID: CMCMAG-BA5-000)
I 13:57:34 Destination Media Supported Write Speeds: 2x
I 13:57:34 Destination Media Sectors: 12 219 392
I 13:57:34 Write Mode: BD
I 13:57:34 Write Type: DAO
I 13:57:34 Write Speed: MAX
I 13:57:34 Hardware Defect Management Active: No
I 13:57:34 BD-R Verify Not Required: Yes
I 13:57:34 Link Size: Auto
I 13:57:34 Lock Volume: Yes
I 13:57:34 Test Mode: No
I 13:57:34 OPC: No
I 13:57:34 BURN-Proof: Enabled
I 13:57:34 Write Speed Successfully Set! - Effective: 8 991 KB/s (2x)
I 13:57:52 Filling Buffer... (80 MiB)
I 13:57:52 Writing LeadIn...
W 13:57:52 Failed to Write Sectors 640 - 671 - Reason: Write Error
W 13:57:52 Retrying (1 of 20)...
W 13:57:52 Retry Failed - Reason: Write Error
W 13:57:52 Retrying (2 of 20)...
W 13:57:52 Retry Failed - Reason: Invalid Address For Write
W 13:57:52 Retrying (3 of 20)...
W 13:57:52 Retry Failed - Reason: Invalid Address For Write
W 13:57:52 Retrying (4 of 20)...
W 13:57:52 Retry Failed - Reason: Invalid Address For Write
W 13:57:52 Retrying (5 of 20)...
W 13:57:52 Retry Failed - Reason: Invalid Address For Write
W 13:57:52 Retrying (6 of 20)...
W 13:57:52 Retry Failed - Reason: Invalid Address For Write
W 13:57:52 Retrying (7 of 20)...
W 13:57:52 Retry Failed - Reason: Invalid Address For Write
W 13:57:52 Retrying (8 of 20)...
W 13:57:52 Retry Failed - Reason: Invalid Address For Write
W 13:57:52 Retrying (9 of 20)...
W 13:57:52 Retry Failed - Reason: Invalid Address For Write
W 13:57:52 Retrying (10 of 20)...
W 13:57:52 Retry Failed - Reason: Invalid Address For Write
W 13:57:52 Retrying (11 of 20)...
W 13:57:52 Retry Failed - Reason: Invalid Address For Write
W 13:57:52 Retrying (12 of 20)...
W 13:57:52 Retry Failed - Reason: Invalid Address For Write
W 13:57:52 Retrying (13 of 20)...
W 13:57:52 Retry Failed - Reason: Invalid Address For Write
W 13:57:52 Retrying (14 of 20)...
W 13:57:52 Retry Failed - Reason: Invalid Address For Write
W 13:57:52 Retrying (15 of 20)...
W 13:57:52 Retry Failed - Reason: Invalid Address For Write
W 13:57:52 Retrying (16 of 20)...
W 13:57:52 Retry Failed - Reason: Invalid Address For Write
W 13:57:52 Retrying (17 of 20)...
W 13:57:52 Retry Failed - Reason: Invalid Address For Write
W 13:57:52 Retrying (18 of 20)...
W 13:57:52 Retry Failed - Reason: Invalid Address For Write
W 13:57:52 Retrying (19 of 20)...
W 13:57:52 Retry Failed - Reason: Invalid Address For Write
W 13:57:52 Retrying (20 of 20)...
W 13:57:52 Retry Failed - Reason: Invalid Address For Write
E 13:57:55 Failed to Write Sectors 640 - 671 - Reason: Write Error
E 13:57:55 Next Writable Address: 0
I 13:57:55 Synchronising Cache...
W 13:57:56 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Write Error
W 13:57:56 Synchronise Cache Failed! - Reason: Write Error
E 13:58:01 Synchronise Cache Failed! - Reason: Write Error
W 13:58:02 User opted to skip the 'Close Track/Session/Disc' functions.
E 13:58:02 Failed to Write Image!
E 13:58:02 Operation Failed! - Duration: 00:00:28
I 13:58:02 Average Write Rate: 0 KiB/s (0.0x) - Maximum Write Rate: 0 KiB/s (0.0x)
 

-------------------------------------------------

 

Is there something I can do to solve this problem? I'm always using default settings of the program.

Thanks a lot for your help.

Posted

This isn't a program issue, your drive just doesn't like the new discs you've got.

 

You'll have to try and get some with the same 'MID' as your last lot.

 

The new 'MID' (CMCMAG-BA5-000) looks like it isn't supported (at all, or just very well) by your drive and the 1.03 firmware.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.