duggy Posted January 18, 2017 Share Posted January 18, 2017 Hi, I've been unable to use a 1GB buffer when writing bluray discs. My PC currently has 32GB ram so I'm pretty sure I'm not out of RAM If i lower the buffer to around 800GB it works but I'd like to use 1GB if possible please. The logs dont say anymore than the following, the out of memory info is never added, but i see it via pop-ups (see attachments). I 20:44:02 ImgBurn Version 2.5.8.0 started! I 20:44:02 Microsoft Windows 8 Professional x64 Edition (6.2, Build 9200) I 20:44:02 Total Physical Memory: 33,466,220 KiB - Available: 28,099,972 KiB I 20:44:02 Initialising SPTI... I 20:44:02 Searching for SCSI / ATAPI devices... I 20:44:02 -> Drive 1 - Info: ATAPI iHAS124 F CL02 (F:) (SATA) I 20:44:03 -> Drive 2 - Info: ATAPI iHBS112 2 PL06 (E:) (SATA) I 20:44:03 Found 1 DVD±RW/RAM and 1 BD-RE! I'm on windows 10 64-bit if it helps, all patched up. Link to comment Share on other sites More sharing options...
duggy Posted January 18, 2017 Author Share Posted January 18, 2017 (edited) Just tried with 900Mib buffer and that worked, just cant use the full 1GB. I 20:44:02 ImgBurn Version 2.5.8.0 started! I 20:44:02 Microsoft Windows 8 Professional x64 Edition (6.2, Build 9200) I 20:44:02 Total Physical Memory: 33,466,220 KiB - Available: 28,099,972 KiB I 20:44:02 Initialising SPTI... I 20:44:02 Searching for SCSI / ATAPI devices... I 20:44:02 -> Drive 1 - Info: ATAPI iHAS124 F CL02 (F:) (SATA) I 20:44:03 -> Drive 2 - Info: ATAPI iHBS112 2 PL06 (E:) (SATA) I 20:44:03 Found 1 DVD±RW/RAM and 1 BD-RE! I 20:54:25 Operation Started! I 20:54:25 Source File: D:\GA 6.ISO I 20:54:25 Source File Sectors: 12,004,352 (MODE1/2048) I 20:54:25 Source File Size: 24,584,912,896 bytes I 20:54:25 Source File Volume Identifier: GA 6 I 20:54:25 Source File Volume Set Identifier: 4A32A4B200B72BE8 I 20:54:25 Source File Application Identifier: ImgBurn v2.5.8.0 I 20:54:25 Source File Implementation Identifier: ImgBurn I 20:54:25 Source File File System(s): UDF (1.02) I 20:54:25 Destination Device: [0:0:0] ATAPI iHBS112 2 PL06 (E:) (SATA) I 20:54:25 Destination Media Type: BD-R (Disc ID: MEI-RA1-001) I 20:54:25 Destination Media Supported Write Speeds: 4x, 6x, 8x, 10x, 12x I 20:54:25 Destination Media Sectors: 12,219,392 I 20:54:25 Write Mode: BD I 20:54:25 Write Type: DAO I 20:54:25 Write Speed: 6x I 20:54:25 Hardware Defect Management Active: No I 20:54:25 BD-R Verify Not Required: Yes I 20:54:25 Link Size: Auto I 20:54:25 Lock Volume: Yes I 20:54:25 Test Mode: No I 20:54:25 OPC: Yes I 20:54:25 BURN-Proof: Enabled I 20:54:27 Write Speed Successfully Set! - Effective: 26,970 KB/s (6x) I 20:54:27 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes I 20:54:27 CD/DVD Life Record Count: 10 - CD/DVD Record Count: 1 I 20:54:27 BD Life Record Count: 13 - BD Record Count: 5 I 20:54:55 Filling Buffer... (900 MiB) I 20:54:59 Writing LeadIn... I 20:55:02 Writing Session 1 of 1... (1 Track, LBA: 0 - 12004351) I 20:55:02 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 12004351) Edited January 18, 2017 by duggy Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted January 18, 2017 Share Posted January 18, 2017 The buffer is allocated via a single call to the 'VirtualAlloc' API function. So that's what's failing and this isn't really a bug, so to speak. Link to comment Share on other sites More sharing options...
khagaroth Posted January 21, 2017 Share Posted January 21, 2017 Probably a stupid question, but are you using correct allocation granularity? Expecting 4k where the system actually uses 64k (which it usually does for VirtualAlloc) would explain this. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted January 21, 2017 Share Posted January 21, 2017 Unless I'm missing something, 1gb is divisible (exactly) by 64k. Link to comment Share on other sites More sharing options...
Recommended Posts