zack S Posted May 27, 2017 Posted May 27, 2017 Here is the log for ImgBurn _______________________________________________________________________________________________________________ I 14:10:32 ImgBurn Version 2.5.8.0 started! I 14:10:32 Microsoft Windows 8 Unknown x64 Edition (0x00000079) (6.2, Build 9200) I 14:10:32 Total Physical Memory: 33,420,784 KiB - Available: 29,566,588 KiB I 14:10:32 Initialising SPTI... I 14:10:32 Searching for SCSI / ATAPI devices... I 14:10:32 -> Drive 1 - Info: HL-DT-ST BD-RE WH16NS40 1.00-01 (E:) (SATA) I 14:10:32 Found 1 BD-RE XL! I 14:11:46 Operation Started! I 14:11:46 Source File: F:\NJVC star wars BD\Return of the Jedi Despecialized BD25.iso I 14:11:46 Source File Sectors: 11,989,760 (MODE1/2048) I 14:11:46 Source File Size: 24,555,028,480 bytes I 14:11:46 Source File Volume Identifier: Star Wars: Return of the Jedi I 14:11:46 Source File Volume Set Identifier: 48EF652200B6F24E I 14:11:46 Source File Application Identifier: ImgBurn v2.5.8.0 I 14:11:46 Source File Implementation Identifier: ImgBurn I 14:11:46 Source File File System(s): UDF (2.50) I 14:11:46 Destination Device: [1:0:0] HL-DT-ST BD-RE WH16NS40 1.00 (E:) (SATA) I 14:11:46 Destination Media Type: BD-R (Disc ID: VERBAT-IMe-000) I 14:11:46 Destination Media Supported Write Speeds: 4x, 6x, 8x, 10x, 12x I 14:11:46 Destination Media Sectors: 12,219,392 I 14:11:46 Write Mode: BD I 14:11:46 Write Type: Incremental I 14:11:46 Write Speed: MAX I 14:11:46 Hardware Defect Management Active: No I 14:11:46 BD-R Verify Not Required: Yes I 14:11:46 Link Size: Auto I 14:11:46 Lock Volume: Yes I 14:11:46 Test Mode: No I 14:11:46 OPC: Yes I 14:11:46 BURN-Proof: Enabled I 14:11:46 Write Speed Successfully Set! - Effective: 53,952 KB/s (12x) I 14:12:08 Filling Buffer... (80 MiB) I 14:12:08 Writing LeadIn... W 14:12:08 Failed to Write Sectors 0 - 31 - Reason: No Additional Sense Information W 14:12:08 Retrying (1 of 20)... I 14:12:08 Writing LeadIn... W 14:12:09 Failed to Write Sectors 32 - 63 - Reason: No Additional Sense Information W 14:12:09 Retrying (1 of 20)... W 14:12:09 Retry Failed - Reason: Invalid Address For Write W 14:12:09 Retrying (2 of 20)... W 14:12:09 Retry Failed - Reason: Invalid Address For Write W 14:12:09 Retrying (3 of 20)... W 14:12:09 Retry Failed - Reason: Invalid Address For Write W 14:12:09 Retrying (4 of 20)... W 14:12:09 Retry Failed - Reason: Invalid Address For Write W 14:12:09 Retrying (5 of 20)... W 14:12:09 Retry Failed - Reason: Invalid Address For Write W 14:12:09 Retrying (6 of 20)... W 14:12:09 Retry Failed - Reason: Invalid Address For Write W 14:12:09 Retrying (7 of 20)... W 14:12:09 Retry Failed - Reason: Invalid Address For Write W 14:12:09 Retrying (8 of 20)... W 14:12:09 Retry Failed - Reason: Invalid Address For Write W 14:12:09 Retrying (9 of 20)... W 14:12:09 Retry Failed - Reason: Invalid Address For Write W 14:12:09 Retrying (10 of 20)... W 14:12:09 Retry Failed - Reason: Invalid Address For Write W 14:12:09 Retrying (11 of 20)... W 14:12:09 Retry Failed - Reason: Invalid Address For Write W 14:12:09 Retrying (12 of 20)... W 14:12:09 Retry Failed - Reason: Invalid Address For Write W 14:12:09 Retrying (13 of 20)... W 14:12:09 Retry Failed - Reason: Invalid Address For Write W 14:12:09 Retrying (14 of 20)... W 14:12:09 Retry Failed - Reason: Invalid Address For Write W 14:12:09 Retrying (15 of 20)... W 14:12:09 Retry Failed - Reason: Invalid Address For Write W 14:12:09 Retrying (16 of 20)... W 14:12:09 Retry Failed - Reason: Invalid Address For Write W 14:12:10 Retrying (17 of 20)... W 14:12:10 Retry Failed - Reason: Invalid Address For Write W 14:12:10 Retrying (18 of 20)... W 14:12:10 Retry Failed - Reason: Invalid Address For Write W 14:12:10 Retrying (19 of 20)... W 14:12:10 Retry Failed - Reason: Invalid Address For Write W 14:12:10 Retrying (20 of 20)... W 14:12:10 Retry Failed - Reason: Invalid Address For Write ___________________________________________________________________________________________________________ I am also getting an I/O Error ___________________________________________________________________________________________________________ I/O Error! Device [1:0:0] HL-DT-ST BD-RE WH16NS40 1.00 (E:) (SATA) ScsiStatus: 0x02 Interpretation: Check Condition CDB: AA 00 00 00 00 20 00 00 00 20 40 00 interpretation: Write (12) - Sectors: 32-63 Sense Area: 70 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 SK Interpretation: No Sense ASC/ASCQ Interpretation: No Additional Sense Information _____________________________________________________________________________________________________________ I just rebooted my computer because my HDD failed and I lost everything. I am assuming that my problem lies with my fresh windows install but I'm not sure how to fix it. I am using the same disks (verbatim) that I was using last time when it worked. I even tried the same file that worked last time before the reboot and it gives the same error as above. Any help would be appreciated.
Recommended Posts