Stuck on 51% when i burn Xgd2 games

[Jokerino]

Hello ,

 

I try to burn ufc undisputed 3. I verify with abgx and all is clean,I use verbatim dual layer 8.5 mk3 and optiarc bc 5500-S,but it remain stuck on 51% ,what can i do? 

 

I 11:09:37 Average Write Rate: N/A - Maximum Write Rate: N/A

I 11:17:55 Operation Started!

I 11:17:55 Source File: D:\torent\UFC Undisputed 3 RF XBOX360-XPG\UFC.dvd

I 11:17:55 Source File Sectors: 3.827.488 (MODE1/2048)

I 11:17:55 Source File Size: 7.838.695.424 bytes

I 11:17:55 Source File Volume Identifier: 13599

I 11:17:55 Source File Volume Set Identifier: ceee8000MS UDFBridge

I 11:17:55 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 11:17:55 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 11:17:55 Source File File System(s): ISO9660; UDF (1.50)

I 11:17:55 Destination Device: [1:0:0] Optiarc BD ROM BC-5500S 1.B2 (E:) (SATA)

I 11:17:55 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00)

I 11:17:55 Destination Media Supported Write Speeds: 2,4x; 4x

I 11:17:55 Destination Media Sectors: 4.173.824

I 11:17:55 Destination Media L0 Data Zone Capacity: 2.086.912 (Changeable: Yes)

I 11:17:55 Write Mode: DVD

I 11:17:55 Write Type: DAO

I 11:17:55 Write Speed: 4x

I 11:17:55 DVD+R DL Reserve Track: No

I 11:17:55 Link Size: Auto

I 11:17:55 Lock Volume: Yes

I 11:17:55 Test Mode: No

I 11:17:55 OPC: No

I 11:17:55 BURN-Proof: Enabled

I 11:17:55 Write Speed Successfully Set! - Effective: 5.540 KB/s (4x)

I 11:17:55 Book Type Setting: DVD-ROM

I 11:17:55 Optimal L0 Data Zone Capacity: 1.913.760

I 11:17:55 Optimal L0 Data Zone Method: Copied From Original Disc

I 11:18:23 Set L0 Data Zone Capacity Succeeded!

I 11:18:23 L0 Data Zone Capacity - Effective: 1.913.760

I 11:18:23 Filling Buffer... (73 MiB)

I 11:18:23 Writing LeadIn...

I 11:18:25 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487)

I 11:18:26 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)

I 11:18:26 Writing Layer 0... (LBA: 0 - 1913759)

I 11:37:42 Writing Layer 1... (LBA: 1913760 - 3827487)

 

 

I do not want to trash another disc ,it is a bit expensive in my region...

Edited November 15, 2017 by Jokerino

[LIGHTNING UK!]

How many failures have you had?

 

Your drive/system just seems to have got stuck.

 

Maybe the drive needs cleaning / replacing?

 

Please do no go by what you read on the internet or see in YouTube videos. Setting the buffer to 73MiB makes absolutely no difference to any errors your drive may or may not throw out.

 

Right click the drive selection box and pick 'Family Tree'. Close the box that comes up and then copy + paste everything from the Log window please.

[Jokerino]

How many failures have you had?

 

Your drive/system just seems to have got stuck.

 

Maybe the drive needs cleaning / replacing?

 

Please do no go by what you read on the internet or see in YouTube videos. Setting the buffer to 73MiB makes absolutely no difference to any errors your drive may or may not throw out.

 

Right click the drive selection box and pick 'Family Tree'. Close the box that comes up and then copy + paste everything from the Log window please.

I have about 3-4 failures only on ufc 3.How can i clean the drive? 

 

I 18:30:19 ImgBurn Version 2.5.8.0 started!

I 18:30:20 Microsoft Windows 7 Professional Edition (6.1, Build 7601 : Service Pack 1)

I 18:30:20 Total Physical Memory: 3.140.476 KiB  -  Available: 1.763.344 KiB

I 18:30:20 Initialising SPTI...

I 18:30:20 Searching for SCSI / ATAPI devices...

I 18:30:21 -> Drive 1 - Info: Optiarc BD ROM BC-5500S 1.B2 (E:) (SATA)

I 18:30:21 Found 1 BD-ROM/DVD±RW!

I 18:31:40 Device: [1:0:0] Optiarc BD ROM BC-5500S 1.B2 (E:) (SATA)

I 18:31:40 Family Tree:

I 18:31:40 -> ACPI x86-based PC

I 18:31:40 -> Microsoft ACPI-Compliant System

I 18:31:40 -> PCI bus

I 18:31:40 -> Standard AHCI 1.0 Serial ATA Controller (VEN_8086&DEV_2929 - Intel - msahci - v6.1.7601.17514)

I 18:31:40 -> IDE Channel (ATA Channel 1)

I 18:31:40 -> CD-ROM Drive (Optiarc BD ROM BC-5500S ATA Device) (Channel 1, Target 0, Lun 0)

 here is the log and a photo

And what settings you recommend for imgburn for xgd2 games?

Edited November 15, 2017 by Jokerino