Jump to content

Recommended Posts

Posted

Hi, In the past ,in my country was possible to get DVDR+DL Verbatim, and didn't have any trouble, with Imageburn for to burn images of movies or whatever was necessary.,as time go Verbatim was more hard to get, and used another brands,and with luck I can burn and get job done.

Recently I updated to Windows 10, buyed a new drive and tried to burn an image with no success, didn't get Verbatim definitively there is not avalaible in my country, and bought Sony .,yet the Imageburn read ok,but didn't start to write in the disc,I don't know what is the cause of this. Maybe you can help me.

My log is :

I 17:06:31 ImgBurn Version 2.5.8.0 started!

I 17:06:31 Microsoft Windows 8 Professional Edition (6.2, Build 9200)

I 17:06:31 Total Physical Memory: 3,407,412 KiB  -  Available: 2,109,364 KiB

I 17:06:31 Initialising SPTI...

I 17:06:31 Searching for SCSI / ATAPI devices...

I 17:06:31 -> Drive 1 - Info: HL-DT-ST DVDRAM GH24NSD1 LG00-20 (I:) (ATA)

I 17:06:31 Found 1 DVD±RW/RAM!

I 17:08:27 Operation Started!

I 17:08:27 Source File: H:\downloads\ROCKS_4.ISO

I 17:08:27 Source File Sectors: 3,348,560 (MODE1/2048)

I 17:08:27 Source File Size: 6,857,850,880 bytes

I 17:08:27 Source File Volume Set Identifier: 4085A34E___MVB__

I 17:08:27 Source File Implementation Identifier: Spruce Technologies

I 17:08:27 Source File File System(s): ISO9660, UDF (1.02)

I 17:08:27 Destination Device: [2:0:0] HL-DT-ST DVDRAM GH24NSD1 LG00 (I:) (ATA)

I 17:08:27 Destination Media Type: DVD+R DL (Disc ID: MBIPG101-R10-65)

I 17:08:27 Destination Media Supported Write Speeds: 4x, 8x

I 17:08:27 Destination Media Sectors: 4,173,824

I 17:08:27 Destination Media L0 Data Zone Capacity: 2,086,912 (Changeable: Yes)

I 17:08:27 Write Mode: DVD

I 17:08:27 Write Type: DAO

I 17:08:27 Write Speed: 2.4x

I 17:08:27 DVD+R DL Reserve Track: No

I 17:08:27 Link Size: Auto

I 17:08:27 Lock Volume: Yes

I 17:08:27 Test Mode: No

I 17:08:27 OPC: No

I 17:08:27 BURN-Proof: Enabled

W 17:08:28 Write Speed Miscompare! - Wanted: 3,324 KB/s (2.4x), Got: 5,540 KB/s (4x)

W 17:08:28 The drive only supports writing these discs at 4x, 8x.

I 17:08:28 Book Type Setting: DVD-ROM

I 17:09:46 Optimal L1 Data Zone Start LBA: 1705024 (VTS_02, PGC: 1, Cell: 5, Vob/Cell ID: 1/5, Time: 01:36:56, SPLIP: No)

I 17:09:46 Optimal L0 Data Zone Capacity: 1,705,024

I 17:09:46 Optimal L0 Data Zone Method: IFO Cell Boundary, 'SPLIP' Flag Not Set

I 17:09:46 Set L0 Data Zone Capacity Succeeded!

I 17:09:46 L0 Data Zone Capacity - Effective: 1,705,024

I 17:09:46 Filling Buffer... (80 MiB)

I 17:09:47 Writing LeadIn...

 

 

From this point ,the program freezes and have to close , the drive is new brand recently buyed, and I don't believe that only me have this trouble.

Hope you can understand my broken english ,because isn't my mother tongue, and can help me.

Thanks in advance.

Posted

Can you burn other discs?

 

Perhaps try enabling the 'Perform OPC Before Write' option in the settings and give it another go.

 

It's a shame you can't get the recommended MKM-003-00 MID Verbatim discs.

Posted

First to thank you for the rapid answer, I did that and ,voila , Imageburn, starts to burn, and begin the work  that have delayed.

Thanks a lot. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.