Messy123 Posted February 24, 2018 Posted February 24, 2018 Everything went well on the first DVD, Read and Write. The 2nd DVD decided to write as the first DVD, though the correct file was picked in the Source space. I deleted the first DVD read file and tried again, same issue. I could try deleting imgburn after each DVD, and reinstalling it, but I have 33 DVDs to copy for a class, so any help would be appreciated. Log below, imgburn screen attached. Thanks I 13:39:12 Destination Media Sectors: 2,295,104 I 13:39:12 Write Mode: DVD I 13:39:12 Write Type: DAO I 13:39:12 Write Speed: 4x I 13:39:12 DVD+R Reserve Track: No I 13:39:12 Link Size: Auto I 13:39:12 Lock Volume: Yes I 13:39:12 Test Mode: No I 13:39:12 OPC: No I 13:39:12 BURN-Proof: Enabled I 13:39:12 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x) I 13:39:13 Filling Buffer... (80 MiB) I 13:39:14 Writing LeadIn... I 13:39:53 Writing Session 1 of 1... (1 Track, LBA: 0 - 2131359) I 13:39:53 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2131359) I 13:53:21 Synchronising Cache... I 13:53:22 Closing Track... I 13:53:32 Finalising Disc... I 13:53:58 Exporting Graph Data... I 13:53:58 Graph Data File: C:\Users\Messy\AppData\Roaming\ImgBurn\Graph Data Files\hp_DVDRW_DU8A6SH_DHS3_SATURDAY-FEBRUARY-24-2018_1-39_PM_SONY-D21-00_4x.ibg I 13:53:58 Export Successfully Completed! I 13:53:58 Operation Successfully Completed! - Duration: 00:14:45 I 13:53:58 Average Write Rate: 5,275 KiB/s (3.9x) - Maximum Write Rate: 5,437 KiB/s (4.0x)
dbminter Posted February 24, 2018 Posted February 24, 2018 I don't see an issue. You're saying you have 1 image and the contents written to more than 1 disc are not the same? Or do you have more than 1 image and one disc is written to one contents and another disc is written with other contents? The only way I can see this happening is if you have one disc that writes as an ISO file less than 4 GB and the other is split into multiple parts and you have a 2nd image from an MDS file. The log shows nothing but a successful burn. If you want to write more than 1 copy of the same image file, are you setting the Copies value in the Write window to 33, or how ever many copies you want to write?
Messy123 Posted February 25, 2018 Author Posted February 25, 2018 (edited) Nevermind! I just figured it out. Thank you for your patience and prompt reply. Have a great evening Edited February 25, 2018 by Messy123
dbminter Posted February 25, 2018 Posted February 25, 2018 So, you want 33 copies of each disc? 33 of Mom and 33 of Dad? As I said, the only way I can see what you describe is happening is if one disc is under 4 GB and the other is over 4 GB and you have image file splitting enabled. What would happen is you'd have 2 image files. 1 an ISO file and one an image file set with an MDS file. It's probably easier to just do a Read of Mom and write 33 copies in a row of Mom. Then, read Dad to a file and repeat. However, after each Read, be sure, under Write mode, you choose File and Recent Files. The most recent image file read to under Read mode will be at the top of the list. This way, you make sure you get the last Read image file to load under Write. I'd also make sure after you burn the first and 2nd copies before burning the remaining 30 plus that you make sure the contents of disc 1 and disc 2 are the same. You don't want to burn 30 plus copies only find some of them are different contents.
dbminter Posted February 26, 2018 Posted February 26, 2018 I thought of another situation where this might occur. If you read Mom to an image file and then Dad to one before you burned anything, ImgBurn probably queued up Mom for burning first. Then, after Mom's image file was burned, Dad's image came up next in the queue and that got burned.
Recommended Posts