Jump to content

Recommended Posts

Posted

If it's anything like my HL BD drive, the HL-DT-ST BD-RE BU40N A102, in Write mode, right click on the target drive in the drop down list of available drives while it has selected your drive in question.  Towards the end, there's a Change Book Type option.  Try that and see if that does the trick.  I've never used it before so I don't know.

 

Posted

Thanks for your help.  I've set the booktype on other DVD burners.  The booktype changes the default booktype of DVD+R to DVD-ROM. In the lower right hand corner of the ImgBrn GUI there is a small icon that looks like an open book or you can use the method you describe.  In either case you must select a/the tab that corresponds to your drive, i.e. Plextor Ricoh, Samsung, BenQ, LG, LITE-ON, NEC or NuTech.  I don't know what HL-DT-ST corresponds to.  I have tried all the available tabs, but the command fails.

Thanks again, Garyflyer

Posted

Setting the booktype afaik requires a certain chipset. Just because it's LG doesn't mean it can. It's the same reason why my bh10ns30 can set the booktype but my BH16NS55 can't.

Verstuurd vanaf mijn Nexus 6P met Tapatalk

Posted

dbminter, Ch3vr0n - thanks for your replies.  Yes - HL-DT-ST  can be Hitachi/LG.  I think what Ch3vr0n says makes sense.

thanks again for your replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.