peterbill Posted April 22, 2019 Posted April 22, 2019 Here is the log for ImgBurn _______________________________________________________________________________________________________________ I 14:10:32 ImgBurn Version 2.5.8.0 started! I 14:10:32 Microsoft Windows 8 Unknown x64 Edition (0x00000079) (6.2, Build 9200) I 14:10:32 Total Physical Memory: 33,420,784 KiB - Available: 29,566,588 KiB I 14:10:32 Initialising SPTI... I 14:10:32 Searching for SCSI / ATAPI devices... I 14:10:32 -> Drive 1 - Info: HL-DT-ST BD-RE WH16NS40 1.00-01 (E:) (SATA) I 14:10:32 Found 1 BD-RE XL! I 14:11:46 Operation Started! I 14:11:46 Source File: F:\NJVC star wars BD\Return of the Jedi Despecialized BD25.iso I 14:11:46 Source File Sectors: 11,989,760 (MODE1/2048) I 14:11:46 Source File Size: 24,555,028,480 bytes I 14:11:46 Source File Volume Identifier: Star Wars: Return of the Jedi I 14:11:46 Source File Volume Set Identifier: 48EF652200B6F24E I 14:11:46 Source File Application Identifier: ImgBurn v2.5.8.0 I 14:11:46 Source File Implementation Identifier: ImgBurn I 14:11:46 Source File File System(s): UDF (2.50) I 14:11:46 Destination Device: [1:0:0] HL-DT-ST BD-RE WH16NS40 1.00 (E:) (SATA) I 14:11:46 Destination Media Type: BD-R (Disc ID: VERBAT-IMe-000) I 14:11:46 Destination Media Supported Write Speeds: 4x, 6x, 8x, 10x, 12x I 14:11:46 Destination Media Sectors: 12,219,392 I 14:11:46 Write Mode: BD I 14:11:46 Write Type: Incremental I 14:11:46 Write Speed: MAX I 14:11:46 Hardware Defect Management Active: No I 14:11:46 BD-R Verify Not Required: Yes I 14:11:46 Link Size: Auto I 14:11:46 Lock Volume: Yes I 14:11:46 Test Mode: No I 14:11:46 OPC: Yes I 14:11:46 BURN-Proof: Enabled I 14:11:46 Write Speed Successfully Set! - Effective: 53,952 KB/s (12x) I 14:12:08 Filling Buffer... (80 MiB) I 14:12:08 Writing LeadIn... W 14:12:08 Failed to Write Sectors 0 - 31 - Reason: No Additional Sense Information W 14:12:08 Retrying (1 of 20)... I 14:12:08 Writing LeadIn... W 14:12:09 Failed to Write Sectors 32 - 63 - Reason: No Additional Sense Information W 14:12:09 Retrying (1 of 20)... W 14:12:09 Retry Failed - Reason: Invalid Address For Write W 14:12:09 Retrying (2 of 20)... W 14:12:09 Retry Failed - Reason: Invalid Address For Write W 14:12:09 Retrying (3 of 20)... W 14:12:09 Retry Failed - Reason: Invalid Address For Write W 14:12:09 Retrying (4 of 20)... W 14:12:09 Retry Failed - Reason: Invalid Address For Write W 14:12:09 Retrying (5 of 20)... W 14:12:09 Retry Failed - Reason: Invalid Address For Write W 14:12:09 Retrying (6 of 20)... W 14:12:09 Retry Failed - Reason: Invalid Address For Write W 14:12:09 Retrying (7 of 20)... W 14:12:09 Retry Failed - Reason: Invalid Address For Write W 14:12:09 Retrying (8 of 20)... W 14:12:09 Retry Failed - Reason: Invalid Address For Write W 14:12:09 Retrying (9 of 20)... W 14:12:09 Retry Failed - Reason: Invalid Address For Write W 14:12:09 Retrying (10 of 20)... W 14:12:09 Retry Failed - Reason: Invalid Address For Write W 14:12:09 Retrying (11 of 20)... W 14:12:09 Retry Failed - Reason: Invalid Address For Write W 14:12:09 Retrying (12 of 20)... W 14:12:09 Retry Failed - Reason: Invalid Address For Write W 14:12:09 Retrying (13 of 20)... W 14:12:09 Retry Failed - Reason: Invalid Address For Write W 14:12:09 Retrying (14 of 20)... W 14:12:09 Retry Failed - Reason: Invalid Address For Write W 14:12:09 Retrying (15 of 20)... W 14:12:09 Retry Failed - Reason: Invalid Address For Write W 14:12:09 Retrying (16 of 20)... W 14:12:09 Retry Failed - Reason: Invalid Address For Write W 14:12:10 Retrying (17 of 20)... W 14:12:10 Retry Failed - Reason: Invalid Address For Write W 14:12:10 Retrying (18 of 20)... W 14:12:10 Retry Failed - Reason: Invalid Address For Write W 14:12:10 Retrying (19 of 20)... W 14:12:10 Retry Failed - Reason: Invalid Address For Write W 14:12:10 Retrying (20 of 20)... W 14:12:10 Retry Failed - Reason: Invalid Address For Write ___________________________________________________________________________________________________________ I am also getting an I/O Error ___________________________________________________________________________________________________________ I/O Error! Device [1:0:0] HL-DT-ST BD-RE WH16NS40 1.00 (E:) (SATA) ScsiStatus: 0x02 Interpretation: Check Condition CDB: AA 00 00 00 00 20 00 00 00 20 40 00 interpretation: Write (12) - Sectors: 32-63 Sense Area: 70 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 SK Interpretation: No Sense ASC/ASCQ Interpretation: No Additional Sense Information _____________________________________________________________________________________________________________ I just rebooted my computer because my HDD failed and I lost everything. I am assuming that my problem lies with my fresh windows install but I'm not sure how to fix it. I am using the same disks (verbatim) that I was using last time when it worked. I even tried the same file that worked last time before the reboot and it gives the same error as above. Any help would be appreciated.
LIGHTNING UK! Posted April 22, 2019 Posted April 22, 2019 Right click the device selection drop down box and pick 'Family Tree'. Close the prompt that comes up and then copy+paste everything from the Log window again please. It could just be a driver issue.
Recommended Posts