anthp Posted May 25, 2021 Posted May 25, 2021 I am burning a DVD disk created by BD Rebuilder with a PIONEER DVD-RW DVR-219L 1.02 everything goes as expected until the tray should come out and go back in to start verifying it does not come out if I eject the tray and load again it will say waiting for the drive to become ready and stop if I eject the disk two or three times I hear the disk spin up and verification starts ok the disk verifies ok and plays perfectly on my blue ray player I also have an ASUS BW-16D1HT 3.00 drive this drive seems to go into verification ok but the disks it burns are unreliable is there a way to manually verify? ; //****************************************\\ ; ImgBurn Version 2.5.8.0 - Log ; Tuesday, 25 May 2021, 15:58:49 ; \\****************************************// ; ; I 15:31:16 ImgBurn Version 2.5.8.0 started! I 15:31:16 Microsoft Windows 8 Professional x64 Edition (6.2, Build 9200) I 15:31:16 Total Physical Memory: 16,715,404 KiB - Available: 13,717,048 KiB I 15:31:16 Initialising SPTI... I 15:31:16 Searching for SCSI / ATAPI devices... I 15:31:17 -> Drive 1 - Info: PIONEER DVD-RW DVR-219L 1.02 (F:) (SATA) I 15:31:17 -> Drive 2 - Info: ASUS BW-16D1HT 3.00 (E:) (SATA) I 15:31:17 Found 1 DVD±RW/RAM and 1 BD-RE XL! I 15:31:42 Operation Started! I 15:31:42 Building Image Tree... W 15:31:42 Removed Filtered File: \DVDFab.miniso I 15:31:46 Calculating Totals... I 15:31:46 Preparing Image... I 15:31:46 Contents: 61 Files, 16 Folders I 15:31:46 Content Type: BD Video I 15:31:46 Data Type: MODE1/2048 I 15:31:46 File System(s): UDF (2.50) I 15:31:46 Volume Label: HAUNTING_IN_CONNECTICUT_2 I 15:31:46 Size: 4,632,401,947 bytes I 15:31:46 Sectors: 2,261,943 I 15:31:46 Image Size: 4,633,591,808 bytes I 15:31:46 Image Sectors: 2,262,496 I 15:31:54 Operation Successfully Completed! - Duration: 00:00:12 I 15:31:54 Operation Started! I 15:31:54 Source File: -==/\/[BUILD IMAGE]\/\==- I 15:31:54 Source File Sectors: 2,262,496 (MODE1/2048) I 15:31:54 Source File Size: 4,633,591,808 bytes I 15:31:54 Source File Volume Identifier: HAUNTING_IN_CONNECTICUT_2 I 15:31:54 Source File Volume Set Identifier: 52B97BF500228547 I 15:31:54 Source File Application Identifier: ImgBurn v2.5.8.0 I 15:31:54 Source File Implementation Identifier: ImgBurn I 15:31:54 Source File File System(s): UDF (2.50) I 15:31:54 Destination Device: [0:0:0] PIONEER DVD-RW DVR-219L 1.02 (F:) (SATA) I 15:31:54 Destination Media Type: DVD-R (Disc ID: MCC 03RG20) I 15:31:54 Destination Media Supported Write Speeds: 6x, 8x, 12x, 16x, 18x, 20x I 15:31:54 Destination Media Sectors: 2,297,888 I 15:31:54 Write Mode: DVD I 15:31:54 Write Type: DAO I 15:31:54 Write Speed: 6x I 15:31:54 Link Size: Auto I 15:31:54 Lock Volume: Yes I 15:31:54 Test Mode: No I 15:31:54 OPC: No I 15:31:54 BURN-Proof: Enabled I 15:31:54 Write Speed Successfully Set! - Effective: 8,310 KB/s (6x) I 15:31:54 Advanced Settings - Optimal Writing Speed: No I 15:31:55 Filling Buffer... (80 MiB) I 15:31:56 Writing LeadIn... I 15:32:23 Writing Session 1 of 1... (1 Track, LBA: 0 - 2262495) I 15:32:23 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2262495) I 15:41:51 Synchronising Cache... I 15:42:04 Exporting Graph Data... I 15:42:04 Graph Data File: C:\Users\antho.DESKTOP-KOUA3U3\AppData\Roaming\ImgBurn\Graph Data Files\PIONEER_DVD-RW_DVR-219L_1.02_25-MAY-2021_15-31_MCC_03RG20_6x.ibg I 15:42:04 Export Successfully Completed! I 15:42:04 Operation Successfully Completed! - Duration: 00:10:09 I 15:42:04 Average Write Rate: 7,966 KiB/s (5.9x) - Maximum Write Rate: 8,231 KiB/s (6.1x) I 15:42:04 Cycling Tray before Verify... W 15:52:26 Waiting for device to become ready... I 15:53:50 Device Ready! I 15:53:50 Operation Started! I 15:53:50 Source Device: [0:0:0] PIONEER DVD-RW DVR-219L 1.02 (F:) (SATA) I 15:53:50 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: MCC 03RG20) I 15:53:50 Source Media Supported Read Speeds: 16x I 15:53:50 Source Media Supported Write Speeds: 6x, 8x, 12x, 16x, 18x, 20x I 15:53:50 Source Media Sectors: 2,262,496 (Track Path: PTP) I 15:53:50 Source Media Size: 4,633,591,808 bytes I 15:53:50 Image File: -==/\/[BUILD IMAGE]\/\==- I 15:53:50 Image File Sectors: 2,262,496 (MODE1/2048) I 15:53:50 Image File Size: 4,633,591,808 bytes I 15:53:50 Image File Volume Identifier: HAUNTING_IN_CONNECTICUT_2 I 15:53:50 Image File Volume Set Identifier: 52B97BF500228547 I 15:53:50 Image File Application Identifier: ImgBurn v2.5.8.0 I 15:53:50 Image File Implementation Identifier: ImgBurn I 15:53:50 Image File File System(s): UDF (2.50) I 15:53:50 Read Speed (Data/Audio): MAX / MAX I 15:53:51 Read Speed - Effective: 6.7x - 16x I 15:53:52 Verifying Session 1 of 1... (1 Track, LBA: 0 - 2262495) I 15:53:52 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 2262495) I 15:58:43 Exporting Graph Data... I 15:58:44 Graph Data File: C:\Users\antho.DESKTOP-KOUA3U3\AppData\Roaming\ImgBurn\Graph Data Files\PIONEER_DVD-RW_DVR-219L_1.02_25-MAY-2021_15-31_MCC_03RG20_6x.ibg I 15:58:44 Export Successfully Completed! I 15:58:44 Operation Successfully Completed! - Duration: 00:04:52 I 15:58:44 Average Verify Rate: 15,603 KiB/s (11.5x) - Maximum Verify Rate: 22,053 KiB/s (16.3x) I 15:58:49 Close Request Acknowledged I 15:58:49 Closing Down... I 15:58:49 Shutting down SPTI... I 15:58:49 ImgBurn closed! ; ; New Text Document.txt
dbminter Posted May 25, 2021 Posted May 25, 2021 Under Mode, there should be a Verify option. Be sure to check Verify against image file if you still have the image file you burned for best Verify results. Otherwise, the Verify will just perform a basic Read operation to a file without creating the ISO.
anthp Posted May 25, 2021 Author Posted May 25, 2021 4 minutes ago, dbminter said: Under Mode, there should be a Verify option. Be sure to check Verify against image file if you still have the image file you burned for best Verify results. Otherwise, the Verify will just perform a basic Read operation to a file without creating the ISO. Thanks for the reply I burnt the disk using “folder to disk” option so would this still work?
LIGHTNING UK! Posted May 26, 2021 Posted May 26, 2021 No, it won’t work if you didn’t burn from an image file. Do the eject / load button seen under the box where you select your device not work for the pioneer? Maybe the belt is slipping or something. It just sounds like you want to try and get that working correctly again.
dbminter Posted May 26, 2021 Posted May 26, 2021 Wouldn't Verify mode still work to do a plain media read test? Just not a Verify against image file test because no image file was created.
LIGHTNING UK! Posted May 26, 2021 Posted May 26, 2021 I don't really class that as verifying, but yes, it would work purely as a read test.
dbminter Posted May 26, 2021 Posted May 26, 2021 Yet, you called it Verify in your own software. I'm just teasing you; I get what you're saying.
LIGHTNING UK! Posted May 27, 2021 Posted May 27, 2021 I couldn’t rename the entire mode just for when the box to compare against an image file gets unchecked Given the choice, you should always verify a disc against the source that created it. When that isn’t possible, I guess a basic read test is better than nothing.
dbminter Posted May 27, 2021 Posted May 27, 2021 Well, you could rename the entire mode if you wanted to. You could call it Monkey Bum or anything!
Recommended Posts