Wontonman Posted November 20, 2006 Posted November 20, 2006 I have a Bin and a Cue file that I would like to burn to a DVD as they are almost a Gig in size. However, when I try to burn them I get: Your image doesn't appear to be of the correct format for burning onto a DVD. Image Format: MODE2/FORM1/2352 DVD Format: MODE1/2048 Would you like to continue anyway? My ImgBurn Log shows: I 01:09:06 ImgBurn Version 2.1.0.0 started! I 01:09:06 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 01:09:06 Initialising SPTI... I 01:09:06 Searching for SCSI / ATAPI devices... I 01:09:06 Found 1 DVD?RW and 1 DVD?RW/RAM! Source information: Label: VIDEOCD Imp ID: Unknown File Sys: ISO9660 Other information: SONY DVD RW DRU-820A 1.0a (ATA) Current Profile: DVD+R Disc Information: Status: Empty Erasable: No Free Sectors: 2,295,104 Free Space: 4,700,372,992 bytes Free Time: 510:03:29 (MM:SS:FF) Supported Write Speeds: 2.4x, 4x, 8x Physical Format Information (ADIP): Disc ID: CMC MAG-M01-00 Book Type: DVD+R Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 2,491,711 Last Physical Sector in Layer 0: 0 Physical Format Information (Last Recorded): Disc ID: CMC MAG-M01-00 Book Type: DVD+R Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 2,491,711 Last Physical Sector in Layer 0: 0 Is there a setting I need to change in ImgBurn? The image is too big to fit on a CDR. Any suggestions would be deeply appreciated. I am new at this.
LIGHTNING UK! Posted November 20, 2006 Posted November 20, 2006 You can't burn a VCD to anything other than a CD. Only CD supports the 'mode' required (Mode 2 / Form 1) for the sectors. ImgBurn does not burn bin / cue setups unless the bin file is a single session / track image - which for VCD it is not. You'll have to use another tool for VCD burning, sorry.
Wontonman Posted November 20, 2006 Author Posted November 20, 2006 You can't burn a VCD to anything other than a CD. Only CD supports the 'mode' required (Mode 2 / Form 1) for the sectors. ImgBurn does not burn bin / cue setups unless the bin file is a single session / track image - which for VCD it is not. You'll have to use another tool for VCD burning, sorry. Thank you so much for your answer. Is there a way to reduce/compress the size of the bin/cue files so that they will fit on a CDR?
Recommended Posts