polopony Posted November 21, 2006 Posted November 21, 2006 that hurt, someone forgot to put the loading ramps down , not quite sure if its real or a photoshop thing though
cornholio7 Posted November 21, 2006 Posted November 21, 2006 then i would say someone is very good with photoshop - ouch!
lfcrule1972 Posted November 21, 2006 Author Posted November 21, 2006 I think the "loading ramps" are the dark pieces of wood at the back of the low loader..... I thought they must have slipped....
polopony Posted November 21, 2006 Posted November 21, 2006 I think the "loading ramps" are the dark pieces of wood at the back of the low loader..... I thought they must have slipped.... no amount of boards would take the weight of that equipment, if you look at the flat bed trailer (1 st pic behind the rear tire) the last few feet is on a hydraulic pivot that lowers to form the ramp someone forgot to lower it and the operator drove it off the edge. I've seen stuff where the hydraulic ramp failed to operate and then they try to use boards or whatever is handy to off load, a disaster in the making .We were building a small medical center in lower New York and the truck driver did his best to dump a 28,000 pound MRI machine into a major street, the chains held, the rep from General Electric was next to me at the time on the second floor and when I blinked he was at the truck .I never saw anyone cover so much ground so fast he them proceeded to scream at the driver at the top of his lungs for what must have been a half hour
JasonFriday13 Posted November 22, 2006 Posted November 22, 2006 Provided you can ride a bicycle, everyone can do this. Just ride down a step about 600 mm high, and you should tumble straight over. I know, I have done this myself once in my younger days. It broke the main shifter on my bike and I had a slightly sore back afterwards. Crazy kids .
polopony Posted November 22, 2006 Posted November 22, 2006 Provided you can ride a bicycle, everyone can do this. Just ride down a step about 600 mm high, and you should tumble straight over. I know, I have done this myself once in my younger days. It broke the main shifter on my bike and I had a slightly sore back afterwards. Crazy kids . how did you get the bike up to 600MPH the best I could ever do was 35MPH or so
JasonFriday13 Posted November 22, 2006 Posted November 22, 2006 Provided you can ride a bicycle, everyone can do this. Just ride down a step about 600 mm high, and you should tumble straight over. I know, I have done this myself once in my younger days. It broke the main shifter on my bike and I had a slightly sore back afterwards. Crazy kids . how did you get the bike up to 600MPH the best I could ever do was 35MPH or so It's not MPH (miles per hour), it is MM (millimeters). Its like riding off a table.
polopony Posted November 25, 2006 Posted November 25, 2006 its never the speed but the sudden stop that gets you
dbminter Posted November 26, 2006 Posted November 26, 2006 OMG! THAT REALLY WAS HIS BRAIN! I saw that lump in the first picture, and thought that was what it was... but, eventually just convinced myself that was a colored pipe...
spinningwheel Posted November 26, 2006 Posted November 26, 2006 Looks like that's where the steering wheel took him.....
Recommended Posts