bobjon3000 Posted March 31, 2023 Posted March 31, 2023 Here is the log below,: I 12:06:31 Cycling Tray before Verify... W 12:06:51 Waiting for device to become ready... I 12:07:03 Device Ready! I 12:07:20 Operation Started! I 12:07:20 Source Device: [0:0:0] HL-DT-ST BD-RE BP50NB40 1.02 (D:) (USB) I 12:07:20 Source Media Type: BD-R (Disc ID: RITEK-DR3-000) I 12:07:20 Source Media Supported Read Speeds: 1x, 2x, 4x, 6x I 12:07:20 Source Media Supported Write Speeds: 2x, 4x, 6x I 12:07:20 Source Media Sectors: 18,768,960 I 12:07:20 Source Media Size: 38,438,830,080 bytes I 12:07:20 Image File: C:\Users\Z I 12:07:20 Image File Sectors: 18,768,960 (MODE1/2048) I 12:07:20 Image File Size: 38,438,830,080 bytes I 12:07:20 Image File Volume Identifier: MM I 12:07:20 Image File Volume Set Identifier: 64205385011E6440 I 12:07:20 Image File Application Identifier: DVDFab Win v1.0 I 12:07:20 Image File Implementation Identifier: DVDFab I 12:07:20 Image File File System(s): UDF (2.50) I 12:07:20 Read Speed (Data/Audio): MAX / MAX I 12:07:21 Read Speed - Effective: 2x - 6x, 6x - 2x I 12:07:21 Verifying Session 1 of 1... (1 Track, LBA: 0 - 18768959) I 12:07:21 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 18768959) I 12:07:21 Verifying Layer 0... (LBA: 0 - 12219391) I 12:28:29 Verifying Layer 1... (LBA: 12219392 - 18768959) W 12:28:42 Failed to Read Sectors 12219392 - 12219423 - Reason: L-EC Uncorrectable Error W 12:28:51 Failed to Read Sector 12219392 - Reason: Timeout on Logical Unit W 12:28:51 Sector 12219392 maps to File: \BDMV\STREAM\00002.m2ts W 12:29:44 Failed to Read Sector 12219393 - Reason: Timeout on Logical Unit W 12:29:44 Sector 12219393 maps to File: \BDMV\STREAM\00002.m2ts W 12:29:50 Retrying (1)... W 12:29:59 Retry Failed - Reason: Timeout on Logical Unit W 12:30:07 Failed to Read Sector 12219393 - Reason: Timeout on Logical Unit W 12:30:07 Sector 12219393 maps to File: \BDMV\STREAM\00002.m2ts W 12:30:16 Failed to Read Sector 12219394 - Reason: Timeout on Logical Unit W 12:30:16 Sector 12219394 maps to File: \BDMV\STREAM\00002.m2ts E 12:30:19 Failed to Read Sector 12219394 - Reason: Timeout on Logical Unit E 12:30:19 Sector 12219394 maps to File: \BDMV\STREAM\00002.m2ts E 12:30:19 Failed to Verify Sectors! I 12:30:20 Exporting Graph Data... I 12:30:21 Graph Data File: C:\Users\Z I 12:30:21 Export Successfully Completed! E 12:30:21 Operation Failed! - Duration: 00:22:59 I 12:30:21 Average Verify Rate: 17,747 KiB/s (4.0x) - Maximum Verify Rate: 27,417 KiB/s (6.2x) W 12:31:52 Device Removal Detected! I 12:31:52 Searching for SCSI / ATAPI devices... I 12:31:53 -> Drive 1 - Info: Msft Virtual DVD-ROM 1.0 (E:) (Virtual) I 12:31:53 Found 1 DVD-ROM! I 12:32:01 Close Request Acknowledged I 12:32:01 Closing Down... I 12:32:01 Shutting down SPTI... I 12:32:01 ImgBurn closed!
dbminter Posted March 31, 2023 Posted March 31, 2023 The issue is probably using double layer BD-R with what appears to be the LG BD drive you're using. I know at least 1 past LG BD burner, the WH16NS40, did not properly write to double layer BD media, even though it claimed to support it. 9 times out of 10, it would fail. The NS60 does not, which is why I use that drive even though I don't need the quad layer capabilities of the NS60. So, I would try 2 different things. One: don't use the Ritek BD DL media. Verbatim media, and by "Verbatim" I don't mean the CMC stuff that they also release, is the only quality double layer media. However, depending on where you live, Ritek media may be the only kind available. Two: try a different BD burner model like the NS60.
bobjon3000 Posted April 1, 2023 Author Posted April 1, 2023 Thank for the quick reply. I'm using lg model LG BP55EB40 if that is the issue.
dbminter Posted April 1, 2023 Posted April 1, 2023 I don't know. I don't think I'd ever heard of that model before. I just guessed based on the drive ID string that it was an LG model and, because of that, equated that could be an issue since there was one with the NS40 and double layer BD.
Recommended Posts