beartooth91 Posted November 28, 2006 Posted November 28, 2006 Hi Folks, New to ImgBurn, but, have burned DVD's with Nero for some time. Just tried to burn a DVD on my new Lite-On DVD burner (using DVD Shrink + Img Burn), but, got the following error: "Synchronise Cache Failed" "Reason: Write Error" This appears to have occured just as the burn was finished (100%), but, I'm **guessing** prior to fixating. Any ideas on how I may proceed ? Any help is appreciated. Thanks, Mark Log as follows: I 15:43:10 ImgBurn Version 2.1.0.0 started! I 15:43:10 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) W 15:43:10 Drive C:\ (FAT32) does not support single files > 4 GB W 15:43:10 Drive D:\ (FAT32) does not support single files > 4 GB W 15:43:10 Drive E:\ (FAT32) does not support single files > 4 GB W 15:43:10 Drive H:\ (FAT) does not support single files > 4 GB I 15:43:10 Initialising SPTI... I 15:43:10 Searching for SCSI / ATAPI devices... I 15:43:10 Found 1 DVD?RW/RAM! I 15:43:11 Operation Started! I 15:43:11 Source File: C:\dvdshrinktemp\ENTERPRISE_S1D7.MDS I 15:43:11 Source File Sectors: 2,125,722 (MODE1/2048) I 15:43:11 Source File Size: 4,353,478,656 bytes I 15:43:11 Source File Volume Identifier: ENTERPRISE_S1D7 I 15:43:11 Source File Implementation Identifier: DVD Shrink I 15:43:11 Source File File System(s): ISO9660, UDF (1.02) I 15:43:11 Destination Device: [0:3:0] LITE-ON DVDRW SHM-165P6S MS0K (F:) (ATA) I 15:43:11 Destination Media Type: DVD-R (Disc ID: TYG02) (Speeds: 4x, 6x, 8x) I 15:43:11 Destination Media Sectors: 2,297,888 I 15:43:11 Write Mode: DVD I 15:43:11 Write Type: DAO I 15:43:11 Write Speed: 8x I 15:43:11 Link Size: Auto I 15:43:11 Test Mode: No I 15:43:11 BURN-Proof: Enabled I 15:43:12 Filling Buffer... I 15:43:12 Writing LeadIn... I 15:44:03 Writing Image... I 15:50:33 Synchronising Cache... W 15:51:56 Potential 'WaitImmediateIO' Deferred Error - (0/2) - Write Error
Shamus_McFartfinger Posted November 28, 2006 Posted November 28, 2006 Possibly just a malfunction with your media. Were you able to retry? Also, update your firmware as yours is pretty old. Grab the latest from here: http://www.liteonit.com/DOWNLOADS/ODD/SHM-...re/DR16MS0P.zip
lfcrule1972 Posted November 28, 2006 Posted November 28, 2006 Also do you normally verify your burns ? I prefer to let ImgBurn verify after each burn........
dontasciime Posted November 28, 2006 Posted November 28, 2006 (edited) I got this error yesterday for the 1st time with the same drive, there was another bit to the error, mind has gone blank what it said, i just put it down to the media and a fluke and gave my son the disc If it had of happened with the type of media your using i would have updated the firmware pronto. Edit actually it's not the same liteon drive the numbers just looked familar, ntos I got too many writers, keep a list in txt doc. Edited November 28, 2006 by dontasciime
beartooth91 Posted November 28, 2006 Author Posted November 28, 2006 Thanks to all who replied. I clicked on "retry". I immediately received the completed "jingles", but, the DVD -R showed no information. I then set the write speed in ImgBurn to 4x and reburned with another TYG02 blank DVD. This time, it was successful. Not sure what's different; however, in the previous session with the error, I had the write speed in ImgBurn set to 8x (not max). Whether thats the cause; I'm not sure. Someone here with more experience will have to give me an answer. This morning, I did update the firmware to MS0P. I then did another burn (with speed set at Max) and all was well. This is a new DVD burner, so, don't have alot of data to go on. Mark
Recommended Posts