Synchronise Cache Failed - Request Help

[beartooth91]

Hi Folks,

 

New to ImgBurn, but, have burned DVD's with Nero for some time. Just tried to burn a DVD on my new Lite-On DVD burner (using DVD Shrink + Img Burn), but, got the following error:

 

"Synchronise Cache Failed"

 

"Reason: Write Error"

 

This appears to have occured just as the burn was finished (100%), but, I'm **guessing** prior to fixating. Any ideas on how I may proceed ? Any help is appreciated.

 

Thanks,

 

Mark

 

Log as follows:

 

I 15:43:10 ImgBurn Version 2.1.0.0 started!

I 15:43:10 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)

W 15:43:10 Drive C:\ (FAT32) does not support single files > 4 GB

W 15:43:10 Drive D:\ (FAT32) does not support single files > 4 GB

W 15:43:10 Drive E:\ (FAT32) does not support single files > 4 GB

W 15:43:10 Drive H:\ (FAT) does not support single files > 4 GB

I 15:43:10 Initialising SPTI...

I 15:43:10 Searching for SCSI / ATAPI devices...

I 15:43:10 Found 1 DVD?RW/RAM!

I 15:43:11 Operation Started!

I 15:43:11 Source File: C:\dvdshrinktemp\ENTERPRISE_S1D7.MDS

I 15:43:11 Source File Sectors: 2,125,722 (MODE1/2048)

I 15:43:11 Source File Size: 4,353,478,656 bytes

I 15:43:11 Source File Volume Identifier: ENTERPRISE_S1D7

I 15:43:11 Source File Implementation Identifier: DVD Shrink

I 15:43:11 Source File File System(s): ISO9660, UDF (1.02)

I 15:43:11 Destination Device: [0:3:0] LITE-ON DVDRW SHM-165P6S MS0K (F:) (ATA)

I 15:43:11 Destination Media Type: DVD-R (Disc ID: TYG02) (Speeds: 4x, 6x, 8x)

I 15:43:11 Destination Media Sectors: 2,297,888

I 15:43:11 Write Mode: DVD

I 15:43:11 Write Type: DAO

I 15:43:11 Write Speed: 8x

I 15:43:11 Link Size: Auto

I 15:43:11 Test Mode: No

I 15:43:11 BURN-Proof: Enabled

I 15:43:12 Filling Buffer...

I 15:43:12 Writing LeadIn...

I 15:44:03 Writing Image...

I 15:50:33 Synchronising Cache...

W 15:51:56 Potential 'WaitImmediateIO' Deferred Error - (0/2) - Write Error

[Shamus_McFartfinger]

Possibly just a malfunction with your media. Were you able to retry? Also, update your firmware as yours is pretty old. Grab the latest from here: http://www.liteonit.com/DOWNLOADS/ODD/SHM-...re/DR16MS0P.zip

[lfcrule1972]

Also do you normally verify your burns ? I prefer to let ImgBurn verify after each burn........

[dontasciime]

I got this error yesterday for the 1st time with the same drive, there was another bit to the error, mind has gone blank what it said, i just put it down to the media and a fluke and gave my son the disc

 

If it had of happened with the type of media your using i would have updated the firmware pronto.

 

 

Edit actually it's not the same liteon drive the numbers just looked familar, ntos I got too many writers, keep a list in txt doc.

Edited November 28, 2006 by dontasciime

[beartooth91]

Thanks to all who replied.

 

I clicked on "retry". I immediately received the completed "jingles", but, the DVD -R showed no information. I then set the write speed in ImgBurn to 4x and reburned with another TYG02 blank DVD. This time, it was successful. Not sure what's different; however, in the previous session with the error, I had the write speed in ImgBurn set to 8x (not max). Whether thats the cause; I'm not sure. Someone here with more experience will have to give me an answer.

This morning, I did update the firmware to MS0P. I then did another burn (with speed set at Max) and all was well. This is a new DVD burner, so, don't have alot of data to go on.

 

Mark

[polopony]

delete