BobFlyer Posted November 29, 2006 Posted November 29, 2006 (edited) I am a novice at IMGBurn, however, I was able to complete an ISO burn this afternoon. But I don' know what typical times are for this type of burn. I did use the verify function and the total time was about 49 minutes from start to finish. Is this average, below average ect.? The good news the disks works in my DVD-TV setup. I have read thru some of the posts and can provide the following information. I looked at the Primary and scondary drives under the device manager. Primary says DMA Secondary says device 0=Dma...Ultra DMA Mode 2 (I think this is the CD) device 1= PIO...PIO (I think this is the DVD) second on 80 cable? The DVD player writer seem to work extremely fast when I used Nero 7 for regular copy..burns ect. 10 minutes for disk full of Jpegs 3 gb worth however, ProShow suggested that I try IMGBurn with the ISO files. So do I need to manual change the selection in the drop dow boxes for device 1? Not very technical on the hardware/devices ect on my end. I have two writers, cd writer, dvd 16x lite on about a month old. Verbatim 4.7gb 16x certified media....says its MCC03RG20 Here is a copy of the burn log. I 15:00:06 ImgBurn Version 2.1.0.0 started! I 15:00:06 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 15:00:06 Initialising SPTI... I 15:00:06 Searching for SCSI / ATAPI devices... I 15:00:06 Found 1 CD-RW, 1 DVD-ROM and 1 DVD?RW/RAM! I 15:03:34 Operation Started! I 15:03:34 Source File: C:\Program Files\Photodex\ProShowGold\menus\SecondtryfamilyhistoryNov28.iso I 15:03:34 Source File Sectors: 1,486,751 (MODE1/2048) I 15:03:34 Source File Size: 3,044,866,048 bytes I 15:03:34 Source File Volume Identifier: PROSHOW_DVD I 15:03:34 Source File Application Identifier: PHOTODEX PROSHOW DVD I 15:03:34 Source File Implementation Identifier: Photodex Proshow DVD I 15:03:34 Source File File System(s): ISO9660, UDF (1.02) I 15:03:34 Destination Device: [1:1:0] LITE-ON DVDRW SHM-165H6S HS07 (E:) (ATA) I 15:03:34 Destination Media Type: DVD-R (Disc ID: MCC 03RG20) (Speeds: 6x, 8x, 12x, 16x) I 15:03:34 Destination Media Sectors: 2,297,888 I 15:03:34 Write Mode: DVD I 15:03:34 Write Type: DAO I 15:03:34 Write Speed: MAX I 15:03:34 Link Size: Auto I 15:03:34 Test Mode: No I 15:03:34 BURN-Proof: Enabled I 15:03:34 Filling Buffer... I 15:03:35 Writing LeadIn... I 15:04:20 Writing Image... I 15:32:22 Synchronising Cache... I 15:32:39 Image MD5: 845e20465db695a80f493ac34cd2326c I 15:32:39 Operation Successfully Completed! - Duration: 00:29:05 I 15:32:39 Average Write Rate: 1,767 KB/s (1.3x) - Maximum Write Rate: 2,834 KB/s (2.0x) I 15:32:39 Cycling Tray before Verify... W 15:32:47 Waiting for device to become ready... I 15:33:00 Device Ready! I 15:33:00 Operation Started! I 15:33:00 Source Device: [1:1:0] LITE-ON DVDRW SHM-165H6S HS07 (E:) (ATA) I 15:33:00 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: MCC 03RG20) (Speeds: 6x, 8x, 12x, 16x) I 15:33:00 Image File: C:\Program Files\Photodex\ProShowGold\menus\SecondtryfamilyhistoryNov28.iso I 15:33:00 Image File Sectors: 1,486,751 (MODE1/2048) I 15:33:00 Image File Size: 3,044,866,048 bytes I 15:33:00 Image File Volume Identifier: PROSHOW_DVD I 15:33:00 Image File Application Identifier: PHOTODEX PROSHOW DVD I 15:33:00 Image File Implementation Identifier: Photodex Proshow DVD I 15:33:00 Image File File System(s): ISO9660, UDF (1.02) I 15:33:00 Verifying Sectors... I 15:49:20 Device MD5: 845e20465db695a80f493ac34cd2326c I 15:49:20 Image MD5: 845e20465db695a80f493ac34cd2326c I 15:49:20 Operation Successfully Completed! - Duration: 00:16:20 I 15:49:20 Average Verify Rate: 3,037 KB/s (2.2x) - Maximum Verify Rate: 3,456 KB/s (2.5x) As you can see about 49 minutes?? I don't know what to expect with ISO files, these were from a program call ProShow Gold 2.6 for creating a slide show of about 600 slides. Any pointers appreciated..Thanks in advance Bob Edited November 29, 2006 by BobFlyer
cornholio7 Posted November 29, 2006 Posted November 29, 2006 take a look in the faq about dma and follow the instructions there http://forum.imgburn.com/index.php?s=&...dpost&p=967 imgburn uses another interface than nero , it sounds like you have dma issues welcome to imgburn forums
kevdriver Posted November 29, 2006 Posted November 29, 2006 BobFlyer, device 1= PIO...PIO (I think this is the DVD) second on 80 cable? This should be on "DMA" or at least "DMA if available". This could be one reason for your slow burns. Secondly you need to update your firmware for your liteon......... current version your on is HS07 New version HS0D. Go here to update: www.rpc1.org
BobFlyer Posted November 30, 2006 Author Posted November 30, 2006 Thanks for the great tips and suggestions. First, I followed the suggestions on the DMA vs PIO...My writer was in PIO mode..Corrected via the uninstall for the drive, rebotted and unit was placed in DMA mode my XP. Second, I updated the firmware in the Lite-on to the latest.. My ISO file burn time went from a previous 29 minutes to 4.12 minutes for the same ISO file, average write was reported at 13.5. Again Thanks for the tips Bob
kevdriver Posted November 30, 2006 Posted November 30, 2006 Glad it worked out for you mate.............
Recommended Posts