Burning Problem- very serious

[dontasciime]

disable Norton's auto protect, or any other anti-virus/security program and exit anything else you have running on right hand side of toolbar.

 

Double click the exe from the zip/or rar file, make sure you have the draw of dvd writer closed and no disc is inserted.

 

Check which drive it detects and make sure it is the right one/ if you have a couple of rom drives installed etc.

 

After it has finished you should restart/reboot windows, so windows can pick up the hardware again.

Edited December 3, 2006 by dontasciime

[volvofl10]

and make sure that you dont kill the power to the drive when your doing it

likewise, if your in an area thats vunerable to power cuts , be carefull

[Tiger]

Hi friends

 

the firm ware seems to be upgraded ithout any problem- hardly took 2 mins.

 

Thank you for the guidance.

 

I shall burn another project tomorrow and I'll let you know the result.

[lfcrule1972]

Hopefully the fw flash will improve things - did you get a "success" message ?

[Tiger]

Hello Ifcrule1972,

 

Yes I have received a success massege this time.

 

Please find the last log as follows:

 

; //****************************************\\

; ImgBurn Version 2.1.0.0 - Log

; Monday, 04 December 2006, 10:44:23

; \\****************************************//

;

;

I 10:20:54 ImgBurn Version 2.1.0.0 started!

I 10:20:54 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

W 10:20:54 Drive I:\ (FAT32) does not support single files > 4 GB

I 10:20:54 Initialising SPTI...

I 10:20:54 Searching for SCSI / ATAPI devices...

I 10:20:54 Found 1 CD-RW and 1 DVD?RW/RAM!

I 10:21:46 Operation Started!

I 10:21:46 Source File: L:\Movies\ConvertXToDVD\MV2.iso

I 10:21:46 Source File Sectors: 2,237,440 (MODE1/2048)

I 10:21:46 Source File Size: 4,582,277,120 bytes

I 10:21:46 Source File Volume Identifier: MV2

I 10:21:47 Source File Application Identifier: IMGBURN V2.1.0.0 - THE ULTIMATE IMAGE BURNER!

I 10:21:47 Source File Implementation Identifier: ImgBurn

I 10:21:47 Source File File System(s): ISO9660, UDF (1.02)

I 10:21:47 Destination Device: [1:0:0]LITE-ON DVDRW SHM-165H6S HS0E (D:) (ATA)

I 10:21:47 Destination Media Type: DVD-R (Disc ID: TYG02) (Speeds: 4x, 6x, 8x)

I 10:21:47 Destination Media Sectors: 2,297,888

I 10:21:47 Write Mode: DVD

I 10:21:47 Write Type: DAO

I 10:21:47 Write Speed: 4x

I 10:21:47 Link Size: Auto

I 10:21:47 Test Mode: No

I 10:21:47 BURN-Proof: Enabled

I 10:21:47 Filling Buffer...

I 10:21:48 Writing LeadIn...

I 10:23:02 Writing Image...

I 10:36:41 Synchronising Cache...

I 10:37:04 Image MD5: 3436e361c5dd734b7e2a9ea56dcac622

I 10:37:04 Operation Successfully Completed! - Duration: 00:15:17

I 10:37:04 Average Write Rate: 5,470 KB/s (3.9x) - Maximum Write Rate: 5,697 KB/s (4.1x)

I 10:37:04 Cycling Tray before Verify...

W 10:37:11 Waiting for device to become ready...

I 10:37:24 Device Ready!

I 10:37:24 Operation Started!

I 10:37:24 Source Device: [1:0:0] LITE-ON DVDRW SHM-165H6S HS0E (D:) (ATA)

I 10:37:24 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: TYG02) (Speeds: 4x, 6x, 8x)

I 10:37:24 Image File: L:\Movies\ConvertXToDVD\MV2.iso

I 10:37:24 Image File Sectors: 2,237,440 (MODE1/2048)

I 10:37:24 Image File Size: 4,582,277,120 bytes

I 10:37:24 Image File Volume Identifier: MV2

I 10:37:24 Image File Application Identifier: IMGBURN V2.1.0.0 - THE ULTIMATE IMAGE BURNER!

I 10:37:24 Image File Implementation Identifier: ImgBurn

I 10:37:24 Image File File System(s): ISO9660, UDF (1.02)

I 10:37:24 Verifying Sectors...

I 10:43:49 Device MD5: 3436e361c5dd734b7e2a9ea56dcac622

I 10:43:49 Image MD5: 3436e361c5dd734b7e2a9ea56dcac622

I 10:43:49 Operation Successfully Completed! - Duration: 00:06:25

I 10:43:49 Average Verify Rate: 11,653 KB/s (8.4x) - Maximum Verify Rate: 16,981 KB/s (12.3x)

I 10:44:23 Close Request Acknowledged

I 10:44:23 Closing Down...

I 10:44:23 Shutting down SPTI...

I 10:44:23 ImgBurn closed!

 

Please tel me if there is anything wrong.

 

Secondly the Video seems to be slightly jerky. The original video was encoded in DivX and I used ConvertXToDVD to convert the file to DVD structure. Then I used ImgBurn built mode to make the iso and then ImgBurn to burn the disc. The stand alone DVD player that I use is of PHILIPS.

So do you have any idea so that I can improve?

 

Thank you again for your continuous support.

[Kenadjian]

There is nothing wrong with that log, your problem would be more than likely be linked to your conversion method / software.

 

Play your converted 'DVD' files with power DVD before you build the ISO, see how it plays, if it's jerky there, then it will be jerky in the final burnt disc.

 

Alternatively, mount your ISO with DAEMON tools and do the same thing before burning it.

[Tiger]

Thank you very much for your suggestion kenadjian:)

[Kenadjian]

You're welcome, and good luck.

[lfcrule1972]

Yeah as ken said the log looks fine now, jerky playback in your case would seem to indicate either a problem with the conversion or the original source file.

 

I use ConvertXtoDVD and have never had that issue but you can't rule it out. Is the original DivX file ok ?