San2123 Posted December 1, 2006 Posted December 1, 2006 Ok, I am a newbie to the forum, so I am apologizing right up front for asking for help on this matter....I have gone through Chat, FAQ, Forum and everywhere else that I could possibly think of to look for help on this and have not had any luck...... After Writing/Burning a disc when it goes into verify mode it stops and does this: I 23:25:00 ImgBurn Version 2.1.0.0 started! I 23:25:00 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 23:25:00 Initialising SPTI... I 23:25:00 Searching for SCSI / ATAPI devices... I 23:25:00 Found 1 DVD?RW! I 23:37:32 Operation Started! I 23:37:32 Source File: C:\HALLOWEEN_SE.ISO I 23:37:32 Source File Sectors: 2,286,063 (MODE1/2048) I 23:37:32 Source File Size: 4,681,857,024 bytes I 23:37:32 Source File Volume Identifier: HALLOWEEN_SE I 23:37:32 Source File Implementation Identifier: DVD Shrink I 23:37:33 Source File File System(s): ISO9660, UDF (1.02) I 23:37:33 Destination Device: [1:0:0] PIONEER DVD-RW DVR-110D 1.37 (D:) (ATA) I 23:37:33 Destination Media Type: DVD+R (Disc ID: CMC MAG-M01-00) (Speeds: 4x, 6x, 8x) I 23:37:33 Destination Media Sectors: 2,295,104 I 23:37:33 Write Mode: DVD I 23:37:33 Write Type: DAO I 23:37:33 Write Speed: MAX I 23:37:33 Link Size: Auto I 23:37:33 Test Mode: No I 23:37:33 BURN-Proof: Enabled I 23:37:34 Filling Buffer... I 23:37:35 Writing LeadIn... I 23:38:25 Writing Image... W 23:42:04 Waiting for buffers to recover... W 23:42:09 Waiting for hard disk activity to reach threshold level... I 23:42:10 Writing Image... W 23:44:39 Waiting for buffers to recover... W 23:44:41 Waiting for hard disk activity to reach threshold level... I 23:44:44 Writing Image... I 23:46:50 Synchronising Cache... I 23:46:51 Closing Track... I 23:46:55 Finalising Disc... I 23:47:31 Image MD5: bf116380c81bd2617a479ad2e7e555a8 I 23:47:32 Operation Successfully Completed! - Duration: 00:09:59 I 23:47:32 Average Write Rate: 9,053 KB/s (6.5x) - Maximum Write Rate: 11,259 KB/s (8.1x) I 23:47:32 Cycling Tray before Verify... W 23:48:01 Waiting for device to become ready... W 23:48:02 Device Not Ready - Unable to Recover TOC W 23:48:02 Retrying (1 of 3)... I 23:48:02 Cycling Tray before Verify... W 23:48:30 Waiting for device to become ready... W 23:48:31 Retry Failed - Unable to Recover TOC W 23:48:31 Retrying (2 of 3)... I 23:48:31 Cycling Tray before Verify... W 23:48:59 Waiting for device to become ready... W 23:49:00 Retry Failed - Unable to Recover TOC W 23:49:00 Retrying (3 of 3)... I 23:49:00 Cycling Tray before Verify... W 23:49:28 Waiting for device to become ready... Then stops.... After waiting for an eternity I try to close and an I/O Error comes up and Says "Unable To Recover TOC" What does that mean? I try to Retry and it does it again....then it allows me to close and the disc is not readable in neither PC nor stand alone DVD player.....Also, at times a message comes up saying Unable to Finalize Disc....What can I do to fix that.....I am using Maxell and Memorex DVD +R, I have used these in the past and never had trouble with them before......PLEASE HELP if you would.
cornholio7 Posted December 1, 2006 Posted December 1, 2006 change your discs for verbatim or taiyo yuden and the problem will disappear, your CMC's are bad
lfcrule1972 Posted December 1, 2006 Posted December 1, 2006 If you search the forum for the dreaded words "CMC MAG" you will see hundreds of problems with that media. You need to buy your discs by media ID (see log above) rather than name on the pack. CMC MAGs are all over the place...
San2123 Posted December 1, 2006 Author Posted December 1, 2006 I'm not sure what "CMC's" are, But thank you. I will switch to verbatim and give it a try. Again thank you for you help. It is nice to know that I have found a place that I can ask questions and get answers. Again thanks!!!!!!
lfcrule1972 Posted December 1, 2006 Posted December 1, 2006 CMC MAGs are part of the media ID for discs made by the CMC Magnetic corp. If you look here http://forum.imgburn.com/index.php?showforum=15 you will see that they make loads of media - but none of it good
zacoz Posted December 2, 2006 Posted December 2, 2006 I'm sure CMC Magnetic corp. used to be the company that kept all those third world countries economies afloat by making widgets. Up until the technology boom and the bottom fell out of the widget market.
Recommended Posts