Bubba Posted December 8, 2006 Posted December 8, 2006 (edited) I recently tried to make a DL DVD and followed some on-line guides for using IMGBurn in Build mode to a Verbatim DVD+R DL (which seems to be the preferred media in all forums). during the burn, I got a few break sugestions and picked the best recomendation and the burn finished sucessfully. during playback all went well until the small pause at the layre break (at leaset I assume it was the layer break) Then the movie started skipping by what looked like each chapter mark. Is this a result of an setting or option I missed in the burn process? any ideas what could cause this? thanks for any info Edited December 8, 2006 by Bubba
LIGHTNING UK! Posted December 8, 2006 Posted December 8, 2006 Please post the log of your burn. You should be able to access the log via 'Help' -> 'ImgBurn Logs'. Skipping normally occurs when the drive can't read the disc properly. Did you verify the disc as part of the burn process?
Scientific Posted December 8, 2006 Posted December 8, 2006 I am a newbie to the layer break. I am having the same problem as Bubba. It plays fine in the computer but in my stand alone it starts skipping chapters at the layer break. I am using Verbatim +R DL. Also there was only 1 option for layer break, this confused me from the guide, I restarted to see if something was wrong but it was the same. Here is the log, go easy I am definitely new to this. I 00:18:44 ImgBurn Version 2.1.0.0 started! I 00:18:44 Microsoft Windows 2000 Professional (5.0, Build 2195 : Service Pack 4) I 00:18:45 Initialising SPTI... I 00:18:45 Searching for SCSI / ATAPI devices... I 00:18:45 Found 1 CD-ROM and 1 DVD?RW/RAM! I 00:27:19 Operation Started! I 00:27:19 Building Image Tree... I 00:27:19 Checking Directory Depth... I 00:27:19 Calculating Totals... I 00:27:19 Preparing Image... I 00:29:57 Using Layer Break LBA: 2050282 -> 2050288 (VTS_01, PGC: 1, Cell: 16, Vob/Cell ID: 2/16, Time: 01:16:59, SPLIP: Yes) I 00:29:57 Checking Path Length... I 00:29:57 Image Size: 8,379,858,944 bytes I 00:29:57 Image Sectors: 4,091,728 I 00:29:57 Operation Successfully Completed! - Duration: 00:02:37 I 00:47:26 Operation Started! I 00:47:26 Building Image Tree... I 00:47:26 Checking Directory Depth... I 00:47:26 Calculating Totals... I 00:47:26 Preparing Image... E 00:47:44 Operation Aborted! - Duration: 00:00:17 I 00:47:46 Operation Started! I 00:47:46 Building Image Tree... I 00:47:46 Checking Directory Depth... I 00:47:46 Calculating Totals... I 00:47:46 Preparing Image... I 00:48:01 Using Layer Break LBA: 2050282 -> 2050288 (VTS_01, PGC: 1, Cell: 16, Vob/Cell ID: 2/16, Time: 01:16:59, SPLIP: Yes) I 00:48:01 Checking Path Length... I 00:48:01 Image Size: 8,379,858,944 bytes I 00:48:01 Image Sectors: 4,091,728 I 00:48:01 Operation Successfully Completed! - Duration: 00:00:15 I 00:48:12 Operation Started! I 00:48:12 Building Image Tree... I 00:48:27 Checking Directory Depth... I 00:48:27 Calculating Totals... I 00:48:27 Preparing Image... E 00:48:52 Operation Aborted! - Duration: 00:00:39 I 00:48:55 Operation Started! I 00:48:55 Building Image Tree... I 00:48:55 Checking Directory Depth... I 00:48:55 Calculating Totals... I 00:48:55 Preparing Image... I 00:49:03 Using Layer Break LBA: 2050282 -> 2050288 (VTS_01, PGC: 1, Cell: 16, Vob/Cell ID: 2/16, Time: 01:16:59, SPLIP: Yes) I 00:49:03 Checking Path Length... I 00:49:03 Image Size: 8,379,858,944 bytes I 00:49:03 Image Sectors: 4,091,728 I 00:49:03 Operation Successfully Completed! - Duration: 00:00:08 I 00:49:39 Operation Started! I 00:49:39 Building Image Tree... I 00:49:45 Checking Directory Depth... I 00:49:45 Calculating Totals... I 00:49:45 Preparing Image... I 00:49:52 Using Layer Break LBA: 2050282 -> 2050288 (VTS_01, PGC: 1, Cell: 16, Vob/Cell ID: 2/16, Time: 01:16:59, SPLIP: Yes -> No) I 00:49:52 Checking Path Length... I 00:49:52 Image Size: 8,379,858,944 bytes I 00:49:52 Image Sectors: 4,091,728 I 00:50:03 Operation Successfully Completed! - Duration: 00:00:23 I 00:50:03 Operation Started! I 00:50:03 Source File: -==/\/[bUILD IMAGE]\/\==- I 00:50:03 Source File Sectors: 4,091,728 (MODE1/2048) I 00:50:03 Source File Size: 8,379,858,944 bytes I 00:50:03 Source File Volume Identifier: PIRATES_OF_THE_CARIBBEAN_2 I 00:50:03 Source File Application Identifier: IMGBURN V2.1.0.0 - THE ULTIMATE IMAGE BURNER! I 00:50:03 Source File Implementation Identifier: ImgBurn I 00:50:03 Source File File System(s): ISO9660, UDF (1.02) I 00:50:03 Destination Device: [1:0:0] HL-DT-ST DVD-RAM GSA-H22L 1.00 (D:) (ATA) I 00:50:03 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x, 6x, 8x) I 00:50:03 Destination Media Sectors: 4,173,824 I 00:50:03 Write Mode: DVD I 00:50:03 Write Type: DAO I 00:50:03 Write Speed: 2.4x I 00:50:03 Link Size: Auto I 00:50:03 Test Mode: No I 00:50:03 BURN-Proof: Enabled I 00:50:03 Optimal L0 Data Zone Capacity: 2,050,288 I 00:50:03 Optimal L0 Data Zone Method: IFO Cell Boundary I 00:50:03 Filling Buffer... I 00:50:05 Writing LeadIn... I 00:50:22 Writing Image... I 00:50:22 Writing Layer 0... (LBA: 0 - 2050287) I 01:03:36 Writing Layer 1... (LBA: 2050288 - 4091727) I 01:16:20 Synchronising Cache... I 01:16:43 Closing Track... I 01:17:22 Finalising Disc... I 01:17:33 Image MD5: e082a140f1465484e179dbe4badc8be8 I 01:17:33 Operation Successfully Completed! - Duration: 00:27:30 I 01:17:33 Average Write Rate: 5,255 KB/s (3.8x) - Maximum Write Rate: 5,612 KB/s (4.1x) I 01:29:08 Operation Started! I 01:29:08 Building Image Tree... I 01:29:08 Checking Directory Depth... I 01:29:08 Calculating Totals... I 01:29:08 Preparing Image... E 01:29:11 Operation Aborted! - Duration: 00:00:03 I 01:29:14 Operation Started! I 01:29:14 Building Image Tree... I 01:29:14 Checking Directory Depth... I 01:29:14 Calculating Totals... I 01:29:14 Preparing Image... E 01:29:41 Operation Aborted! - Duration: 00:00:26 I 01:29:42 Close Request Acknowledged I 01:29:42 Closing Down... I 01:29:43 Shutting down SPTI... I 01:29:43 ImgBurn closed!
LIGHTNING UK! Posted December 8, 2006 Posted December 8, 2006 You should start verifying your discs as part of the 'write' process. To do that, just ensure the 'Verify' option is ticked where you select the 'Destination' drive. That'll at least prove your PC can read the disc back ok. Nothing looks out of place though so perhaps your player just doesn't like the media very much. Trouble is, you don't get any better than Verbatim! Maybe the 2.4x rated discs would work better for you - rather than the 8x ones you have now. They use the MKM-002-00 dye rather than MKM-003-00
blutach Posted December 10, 2006 Posted December 10, 2006 I'm still on the MKM-001s which are superb at 2.4x. One thing I did note was perhaps you are burning too slow! Your burner is saying it'll burn these at 4, 6 and 8x. You selected 2.4x. Not normally an issue, but you never know. Try again at 4x. Regards
Shamus_McFartfinger Posted December 10, 2006 Posted December 10, 2006 Won't make any difference Blu. No point selecting 2.4x if the drive/media doesn't support it. <Clever dick mode off>
topFlite Posted February 10, 2007 Posted February 10, 2007 (edited) The first several chapters following the layer break skip for me as well. It appears that the verification step is not successful... Perhaps this could have caught the problem? I 15:37:49 Operation Started! I 15:37:49 Building Image Tree... I 15:37:49 Checking Directory Depth... I 15:37:49 Calculating Totals... I 15:37:49 Preparing Image... I 15:37:55 Using Layer Break LBA: 2060229 -> 2065792 (VTS_04, PGC: 1, Cell: 26, Vob/Cell ID: 2/1, Time: 01:03:48, SPLIP: No) I 15:37:55 Checking Path Length... I 15:37:55 Image Size: 8,461,484,032 bytes I 15:37:55 Image Sectors: 4,131,584 I 15:38:01 Operation Successfully Completed! - Duration: 00:00:11 I 15:38:01 Operation Started! I 15:38:01 Source File: -==/\/[bUILD IMAGE]\/\==- I 15:38:01 Source File Sectors: 4,131,584 (MODE1/2048) I 15:38:01 Source File Size: 8,461,484,032 bytes I 15:38:01 Source File Volume Identifier: I 15:38:01 Source File Application Identifier: IMGBURN V2.1.0.0 - THE ULTIMATE IMAGE BURNER! I 15:38:01 Source File Implementation Identifier: ImgBurn I 15:38:01 Source File File System(s): ISO9660, UDF (1.02) I 15:38:01 Destination Device: [0:0:0] HL-DT-ST DVDRAM GSA-4084N KQ09 (E:) (ATA) I 15:38:01 Destination Media Type: DVD+R DL (Disc ID: RITEK-D01-01) (Speeds: 2.4x) I 15:38:01 Destination Media Sectors: 4,173,824 I 15:38:01 Write Mode: DVD I 15:38:01 Write Type: DAO I 15:38:01 Write Speed: 2.4x I 15:38:01 Link Size: Auto I 15:38:01 Test Mode: No I 15:38:01 BURN-Proof: Enabled I 15:38:01 Optimal L0 Data Zone Capacity: 2,065,792 I 15:38:01 Optimal L0 Data Zone Method: IFO Cell Boundary, 'SPLIP' Flag Not Set I 15:39:07 Filling Buffer... I 15:39:08 Writing LeadIn... I 15:39:10 Writing Image... I 15:39:10 Writing Layer 0... (LBA: 0 - 2065791) I 16:00:34 Writing Layer 1... (LBA: 2065792 - 4131583) I 16:22:01 Synchronising Cache... I 16:22:02 Closing Track... I 16:22:09 Finalising Disc... I 16:23:12 Image MD5: f6a68bc65368665278f9226c67483ff9 I 16:23:12 Operation Successfully Completed! - Duration: 00:45:10 I 16:23:12 Average Write Rate: 3,213 KB/s (2.3x) - Maximum Write Rate: 3,387 KB/s (2.4x) I 16:23:12 Cycling Tray before Verify... W 16:23:17 Waiting for device to become ready... I 16:44:17 Abort Request Acknowledged E 16:44:17 Device Not Ready - Medium Not Present E 16:44:17 Operation Aborted! I 16:44:42 Close Request Acknowledged I 16:44:42 Closing Down... I 16:44:42 Shutting down SPTI... I 16:44:42 ImgBurn closed! ; ; After reading additional posts, led me to test the disk on several other players. The disk worked fine on 9" TV-DVD combo and laptop drive. Therefore, my Toshiba SD2805 appears to be the culprit. Edited February 10, 2007 by topFlite
LIGHTNING UK! Posted February 10, 2007 Posted February 10, 2007 If you look around the forum, you'll see we laugh in the face of Ritek / CMC DL media and recommend people to use Verbatim DL media (and ONLY Verbatim!!!!). Ok so it's more expensive, but at least it works!
Recommended Posts