Snipe Posted January 2, 2007 Posted January 2, 2007 First, I must say that ImgBurn is an amazing program by far the best that I have seen. I have one small problem though, after burning an image it stalls at cycling tray before verify? What should I do?
Movie Junkie Posted January 2, 2007 Posted January 2, 2007 First, I must say that ImgBurn is an amazing program by far the best that I have seen. I have one small problem though, after burning an image it stalls at cycling tray before verify? What should I do?Hi Snipe. Welcome to the forum. I'm not sure I understand what you are saying. Does the tray cycle? If so please tell us what you mean by stalling.
Snipe Posted January 2, 2007 Author Posted January 2, 2007 First, I must say that ImgBurn is an amazing program by far the best that I have seen. I have one small problem though, after burning an image it stalls at cycling tray before verify? What should I do?Hi Snipe. Welcome to the forum. I'm not sure I understand what you are saying. Does the tray cycle? If so please tell us what you mean by stalling. Thanks for the quick reply. I don't exactly know what is supposed to do to cycle but I am guessing it automatically ejects the drive and closes it back up but it hasnt done nothing like that. The description on the bottom says cylcing tray before verify and it has been like that for 10 minutes.
Snipe Posted January 2, 2007 Author Posted January 2, 2007 Hahahaha, I was searching on the board and all of a sudden the drive popped right open and closed it self and now it is verifying the sectors. Thanks for your time and effort Movie Junkie.
Movie Junkie Posted January 2, 2007 Posted January 2, 2007 You are correct. The drive is supposed to open and then close prior to the verification of the disc. What other programs do you have running while you're using ImgBurn? It sounds like something else is keeping the drive from working. Also please post the log here.
Movie Junkie Posted January 2, 2007 Posted January 2, 2007 Hahahaha, I was searching on the board and all of a sudden the drive popped right open and closed it self and now it is verifying the sectors. Thanks for your time and effort Movie Junkie. I'm glad that it's OK but it still shouldn't have taken as long as it did. If it happens again please post the log here and I'm sure someone will be able to help you.
Snipe Posted January 2, 2007 Author Posted January 2, 2007 I will post the log anyways for anyone that has a similar problem in the future. I wasnt running any programs other than my bit torrent client. I 17:16:10 Destination Device: [5:0:0] BENQ DVD DD DW1640 BSHB (D:) (ATA) I 17:16:10 Destination Media Type: DVD+R DL (Disc ID: RITEK-D01-01) (Speeds: 2.4x) I 17:16:10 Destination Media Sectors: 4,173,824 I 17:16:10 Write Mode: DVD I 17:16:10 Write Type: DAO I 17:16:10 Write Speed: 2.4x I 17:16:10 Link Size: Auto I 17:16:10 Test Mode: No I 17:16:10 BURN-Proof: Enabled I 17:16:10 User Specified L0 Data Zone Capacity: 1,913,760 I 17:16:11 Filling Buffer... I 17:16:11 Writing LeadIn... I 17:16:20 Writing Image... I 17:16:20 Writing Layer 0... (LBA: 0 - 1913759) I 17:36:22 Writing Layer 1... (LBA: 1913760 - 3697695) I 17:55:36 Synchronising Cache... I 17:55:37 Closing Track... I 17:55:45 Finalising Disc... I 17:58:41 Image MD5: ea1d62fc020c71a52716c29ff5b40332 I 17:58:42 Operation Successfully Completed! - Duration: 00:42:30 I 17:58:42 Average Write Rate: 3,140 KB/s (2.3x) - Maximum Write Rate: 3,394 KB/s (2.5x) I 17:58:42 Cycling Tray before Verify... W 18:20:38 Waiting for device to become ready... I 18:20:49 Device Ready! I 18:20:50 Operation Started! I 18:20:50 Source Device: [5:0:0] BENQ DVD DD DW1640 BSHB (D:) (ATA) I 18:20:50 Source Media Type: DVD+R DL (Book Type: DVD+R DL) (Disc ID: RITEK-D01-01) I 18:20:50 Image File: C:\Documents and Settings\Tony\Desktop\LEAD.iso I 18:20:50 Image File Sectors: 3,697,696 (MODE1/2048) I 18:20:50 Image File Size: 7,572,881,408 bytes I 18:20:50 Image File Volume Identifier: LEAD I 18:20:50 Image File Implementation Identifier: Daikin U.S. Comtec Lab I 18:20:50 Image File File System(s): ISO9660, UDF (1.02) I 18:20:50 Verifying Sectors...
Movie Junkie Posted January 2, 2007 Posted January 2, 2007 Did the tray eject right away and then you had to wait for it to become ready or did it take that long for the tray to eject. From the log file it appears that the tray ejected as it was supposed to do but it took to long for it to become ready after it closed. One other thing. And this could be your problem. Do not use anything but Verbatim +DL discs. Verbatim is the only +DL disc that is any good. I'm guessing that the tray ejected correctly as the log shows but when the tray went back in, the drive had a problem reading the disc.
lfcrule1972 Posted January 2, 2007 Posted January 2, 2007 Does your PC slow down a lot when running bit torrent ? It's a long shot but maybe there was not enough resources to cycle before verify ?
Kenadjian Posted January 2, 2007 Posted January 2, 2007 I 17:58:42 Cycling Tray before Verify...W 18:20:38 Waiting for device to become ready... I 18:20:49 Device Ready! I 18:20:50 Operation Started! Movie junkie is spot on. If you look at the time taken to reinitialize the disc you just burnt, it's about 20 minutes, which means the drive was having trouble reading the disc. Do yourself a favor and get some verb +R/DL discs as suggested by MJ.
lfcrule1972 Posted January 3, 2007 Posted January 3, 2007 I wonder how long a drive will try and read the disc before it bombs out ?
Kenadjian Posted January 3, 2007 Posted January 3, 2007 I dare say the verification would have been shite too. @LFC, about 3".
Recommended Posts