Hubbabub Posted November 19, 2005 Share Posted November 19, 2005 I'm try to burn a +RW disc so the disc is identified as booktype "dvd-rom" on a patched NEC ND-3500AG (firmware 2.TG). I have set the booktype to "DVD-ROM" for +R, +RW and +R DL media. Any suggestions ? But after the burning AnyDVD show this -------------------- Summary for drive H: (AnyDVD 5.5.4.1) Drive (Hardware) Region: free Media is a Data DVD. Booktype: dvd+rw (version 2), Layers: 1 Video DVD (or CD) label: DRAGONS Media is not CSS protected. Video Standard: PAL Media is region free. RCE protection not found. DVD structure appears to be correct. Structural copy protection not found. Autorun not found on Video DVD. Bad sector protection not found. Emulating RPC-2 drive with region 2! -------------------------------------- Here is the ImgBurn 1.0 logs ------------------------ I 10:21:14 ImgBurn Version 1.0.0.0 started! I 10:21:14 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 10:21:14 Initialising Patin-Couffin... I 10:21:14 Patin-Couffin - VSO Software - Version 1.35.0.0 - Internal Revision 35 I 10:21:14 Searching for SCSI / ATAPI devices... I 10:21:14 Found 2 DVD-ROMs and 1 DVD?RW! I 10:21:14 Operation Started! I 10:21:14 Source File: F:\DRAGONS.ISO I 10:21:14 Source File Sectors: 889?571 (MODE1/2048) I 10:21:14 Source File Size: 1?821?841?408 bytes I 10:21:14 Source File Application Identifier: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR © 1993 E.YOUNGDALE © 1997 J.PEARSON/J.SCHILLING I 10:21:14 Source File Implementation Identifier: mkisofs I 10:21:14 Destination Device: [0:2:0] _NEC DVD_RW ND-3500AG 2.TG (H:) (ATA) I 10:21:14 Destination Media Type: DVD+RW (Disc ID: RICOHJPN-W11-01) (Speeds: 2,4x; 4x) I 10:21:14 Destination Media Sectors: 2?295?104 I 10:21:14 Write Mode: DVD I 10:21:14 Write Type: DAO I 10:21:14 Write Speed: MAX I 10:21:14 Link Size: Auto I 10:21:14 Test Mode: No I 10:21:14 BURN-Proof: Enabled I 10:21:14 Filling Buffer... I 10:21:20 Writing LeadIn... I 10:21:37 Writing Image... I 10:26:55 Synchronising Cache... I 10:26:56 Closing Session... I 10:26:57 Operation Successfully Completed! - Duration: 00:05:42 I 10:26:57 Average Write Rate: 5?612 KB/s (4.1x) - Maximum Write Rate: 5?742 KB/s (4.1x) -------------------------------------------- _NEC DVD_RW ND-3500AG 2.TG (ATA) Current Profile: DVD+RW Disc Information: Status: Complete Erasable: Yes Formatted: No (Started) Sessions: 1 Sectors: 2?295?104 Size: 4?700?372?992 bytes Time: 510:03:29 (MM:SS:FF) Supported Write Speeds: 2,4x; 4x Physical Format Information (ADIP): Disc ID: RICOHJPN-W11-01 Book Type: DVD+RW Part Version: 2 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196?608 Last Physical Sector of Data Area: 2?491?711 Last Physical Sector in Layer 0: 0 Physical Format Information (Last Recorded): Disc ID: RICOHJPN-W11-01 Book Type: DVD+RW Part Version: 2 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196?608 Last Physical Sector of Data Area: 1?086?287 Last Physical Sector in Layer 0: 0 Format Capacity: Sectors: 2?295?104 Size: 4?700?372?992 bytes Time: 510:03:29 (MM:SS:FF) ------------------------------------- /Hubbabub Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted November 19, 2005 Share Posted November 19, 2005 For DVD+RW, I think it's done when you format the disc, NOT when you burn it. Link to comment Share on other sites More sharing options...
Recommended Posts