Error Messages

Velvetpants · January 19, 2007

Hi there.....First time poster,long time burner. I recently picked up a Lite-On SHM-165H6S and keep getting the following errors in the log file while burning a 360 backup ISO. Twice it has burned well while twice I have gotten this error message.My firmware is all up to date and I am using Verbatim DL. Could it be a power supply prob? Or is it just hit and miss with this burner as my Pioneer 111d works very well.........

I 15:29:27 ImgBurn Version 2.1.0.0 started!

I 15:29:27 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 15:29:27 Initialising SPTI...

I 15:29:27 Searching for SCSI / ATAPI devices...

I 15:29:28 Found 1 DVD?RW and 1 DVD?RW/RAM!

I 15:51:04 Operation Started!

I 15:51:04 Source File: F:\Xbox 360\Call of Duty 3.iso

I 15:51:04 Source File Sectors: 3,762,528 (MODE1/2048)

I 15:51:04 Source File Size: 7,705,657,344 bytes

I 15:51:04 Source File Volume Identifier: XBOX360

I 15:51:04 Source File Implementation Identifier: Daikin U.S. Comtec Lab

I 15:51:04 Source File File System(s): ISO9660, UDF (1.02).

I 15:51:04 Destination Device: [1:1:0] LITE-ON DVDRW SHM-165H6S HS0E (G:) (ATA)

I 15:51:04 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x)

I 15:51:04 Destination Media Sectors: 4,173,824

I 15:51:04 Write Mode: DVD

I 15:51:04 Write Type: DAO

I 15:51:04 Write Speed: MAX

I 15:51:04 Link Size: Auto

I 15:51:04 Test Mode: No

I 15:51:04 BURN-Proof: Enabled

I 15:51:05 User Specified L0 Data Zone Capacity: 1,913,760

I 15:51:54 Filling Buffer...

I 15:51:55 Writing LeadIn...

I 15:51:56 Writing Image...

I 15:51:56 Writing Layer 0... (LBA: 0 - 1913759)

I 16:03:39 Writing Layer 1... (LBA: 1913760 - 3762527)

I 16:15:00 Synchronising Cache...

I 16:15:03 Closing Track...

W 16:15:04 Potential 'WaitImmediateIO' Deferred Error - (0/2) - Power Calibration Area Error

W 16:15:10 Potential 'WaitImmediateIO' Deferred Error - (0/2) - Power Calibration Area Error

W 16:15:12 Potential 'WaitImmediateIO' Deferred Error - (0/2) - Power Calibration Area Error

W 16:15:16 Potential 'WaitImmediateIO' Deferred Error - (0/2) - Power Calibration Area Error

W 16:15:18 Potential 'WaitImmediateIO' Deferred Error - (0/2) - Power Calibration Area Error

E 16:15:19 Close Track Failed! - Reason: Power Calibration Area Error

I 16:15:19 Finalising Disc...

E 16:15:23 Finalise Disc Failed! - Reason: Session Fixation Error - Incomplete Track in Session

I 16:15:23 Image MD5: 7bae00ab3c6cbb70fb49a21fc75aef2c

I 16:15:26 Operation Successfully Completed! - Duration: 00:24:19

I 16:15:26 Average Write Rate: 5,441 KB/s (3.9x) - Maximum Write Rate: 5,697 KB/s (4.1x)

And here is the info from the right hand pane;

LITE-ON DVDRW SHM-165H6S HS0E (ATA)

Current Profile: DVD+R DL

Disc Information:

Status: Incomplete

Erasable: No

Sessions: 1

Free Sectors: 64,992

Free Space: 133,103,616 bytes

Free Time: 14:28:42 (MM:SS:FF)

Supported Write Speeds: 2.4x, 4x

DVD?R DL Boundary Information:

L0 Data Zone Capacity: 1,913,760

Changeable: No

Physical Format Information (ADIP):

Disc ID: MKM-001-00

Book Type: DVD+R DL

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 16,580,607

Last Physical Sector in Layer 0: 2,283,519

Physical Format Information (Last Recorded):

Disc ID: MKM-001-00

Book Type: DVD+R DL

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 16,580,607

Last Physical Sector in Layer 0: 2,110,367

*Edit-Just figured out how to manually close the discs....Time to go fish those discs out of the trash..........But if anyone has some advice on avoiding these errors it would be much appreciated.....

Edited January 19, 2007 by Velvetpants

**cornholio7** · January 19, 2007

what happens at 2.4x, do you get the same errors?

Velvetpants · January 19, 2007

Trying it right now....will post my results.....

Velvetpants · January 19, 2007

Burning at 2.4x did no good.......It crapped out at %50........the following log shows the errors.....I am at my wits end on this as doing burns with the Pioneer 111d gives me no hassle at all but since my buddy has an NME 1.1 chip with a Samsung drive I need to be able to set the booktype to DVD+R DL(hence the reason I bought the Lite-On burner)Could this be caused by an insufficient power supply?...As I am running 3 HD and 2 Optical drives off of a 300w PSU......help?

I 17:55:30 Queue Loaded Successfully!

I 17:56:05 Operation Started!

I 17:56:05 Source File: F:\Xbox 360\Gears of War.000

I 17:56:05 Source File Sectors: 3,762,528 (MODE1/2048)

I 17:56:05 Source File Size: 7,705,657,344 bytes

I 17:56:05 Source File Volume Identifier: XBOX360

I 17:56:05 Source File Implementation Identifier: Daikin U.S. Comtec Lab

I 17:56:05 Source File File System(s): ISO9660, UDF (1.02)

I 17:56:05 Destination Device: [1:1:0] LITE-ON DVDRW SHM-165H6S HS0E (G:) (ATA)

I 17:56:05 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x)

I 17:56:05 Destination Media Sectors: 4,173,824

I 17:56:05 Write Mode: DVD

I 17:56:05 Write Type: DAO

I 17:56:05 Write Speed: 2.4x

I 17:56:05 Link Size: Auto

I 17:56:05 Test Mode: No

I 17:56:05 BURN-Proof: Enabled

I 17:56:05 User Specified L0 Data Zone Capacity: 1,913,760

I 17:56:45 Filling Buffer...

I 17:56:45 Writing LeadIn...

I 17:56:47 Writing Image...

I 17:56:47 Writing Layer 0... (LBA: 0 - 1913759)

I 18:16:20 Writing Layer 1... (LBA: 1913760 - 3762527)

W 18:16:21 Failed to Write Sectors 1913760 - 1913791 - Power Calibration Area Error

W 18:16:21 Retrying (1 of 20)...