cvisinho Posted February 11, 2007 Posted February 11, 2007 Hello all, I am pretty new to this and i just started using this program. Today i decided to give it a couple trys. Everything seemed to work perfectly but when the burn was completed, i noticed that nothing was burnt to the disc. It wouldnt play on the computer or my dvd player which is capable for almost everything. I tried 2 times and the first time i thought it may have been the disc so i tried another disc and got nothing also. I used a Phillips and an old Memorex i had laying around, both DVD-R Any help is appreciated Here is my last log I cancelled initially because i forgot to change the write speed but re-started right after that. ImgBurn Version 2.1.0.0 - Log ; Sunday, 11 February 2007, 18:25:02 ; \\****************************************// ; ; I 17:30:25 ImgBurn Version 2.1.0.0 started! I 17:30:25 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2) I 17:30:25 Initialising SPTI... I 17:30:25 Searching for SCSI / ATAPI devices... I 17:30:26 Found 1 DVD-ROM and 1 DVD?RW! I 17:42:54 Operation Started! I 17:42:54 Source File: C:\Documents and Settings\Chris Visinho\My Documents\My DVDs\UNKNOWN.ISO I 17:42:54 Source File Sectors: 2,118,499 (MODE1/2048) I 17:42:54 Source File Size: 4,338,685,952 bytes I 17:42:54 Source File Volume Identifier: UNKNOWN I 17:42:54 Source File Implementation Identifier: DVD Shrink I 17:42:55 Source File File System(s): ISO9660, UDF (1.02) I 17:42:55 Destination Device: [0:2:0] TSSTcorp DVD+-RW TS-H553A DE04 (E:) (ATAPI) I 17:42:55 Destination Media Type: DVD-R (Disc ID: PRODISCG02) (Speeds: 2x) I 17:42:55 Destination Media Sectors: 2,298,496 I 17:42:55 Write Mode: DVD I 17:42:55 Write Type: DAO I 17:42:55 Write Speed: 8x I 17:42:55 Link Size: Auto I 17:42:55 Test Mode: Yes I 17:42:55 BURN-Proof: Enabled I 17:42:55 Filling Buffer... I 17:42:55 Writing LeadIn... I 17:43:03 Abort Request Acknowledged I 17:43:04 Synchronising Cache... I 17:49:44 Cycling Tray after Test Write... E 17:49:48 Failed to Write Image! E 17:49:48 Operation Aborted! - Duration: 00:06:53 I 17:49:48 Average Write Rate: 0 KB/s (0.0x) - Maximum Write Rate: 0 KB/s (0.0x) I 17:51:33 Operation Started! I 17:51:33 Source File: C:\Documents and Settings\Chris Visinho\My Documents\My DVDs\UNKNOWN.ISO I 17:51:33 Source File Sectors: 2,118,499 (MODE1/2048) I 17:51:33 Source File Size: 4,338,685,952 bytes I 17:51:33 Source File Volume Identifier: UNKNOWN I 17:51:33 Source File Implementation Identifier: DVD Shrink I 17:51:33 Source File File System(s): ISO9660, UDF (1.02) I 17:51:33 Destination Device: [0:2:0] TSSTcorp DVD+-RW TS-H553A DE04 (E:) (ATAPI) I 17:51:33 Destination Media Type: DVD-R (Disc ID: PRODISCG02) (Speeds: 2x) I 17:51:33 Destination Media Sectors: 2,298,496 I 17:51:33 Write Mode: DVD I 17:51:33 Write Type: DAO I 17:51:33 Write Speed: 2.4x I 17:51:33 Link Size: Auto I 17:51:33 Test Mode: Yes I 17:51:33 BURN-Proof: Enabled I 17:51:34 Filling Buffer... I 17:51:34 Writing LeadIn... I 17:51:43 Writing Image... I 18:17:47 Synchronising Cache... I 18:18:29 Image MD5: 5dbda0a6e0505cba8a5334658f9b67f3 I 18:18:32 Operation Successfully Completed! - Duration: 00:26:55 I 18:18:32 Average Write Rate: 2,709 KB/s (2.0x) - Maximum Write Rate: 2,809 KB/s (2.0x) I 18:25:02 Close Request Acknowledged I 18:25:02 Closing Down... I 18:25:02 Shutting down SPTI... I 18:25:02 ImgBurn closed!
Movie Junkie Posted February 12, 2007 Posted February 12, 2007 Hello all,I am pretty new to this and i just started using this program. Today i decided to give it a couple trys. Everything seemed to work perfectly but when the burn was completed, i noticed that nothing was burnt to the disc. It wouldnt play on the computer or my dvd player which is capable for almost everything. I tried 2 times and the first time i thought it may have been the disc so i tried another disc and got nothing also. I used a Phillips and an old Memorex i had laying around, both DVD-R Any help is appreciated Here is my last log I cancelled initially because i forgot to change the write speed but re-started right after that. ImgBurn Version 2.1.0.0 - Log ; Sunday, 11 February 2007, 18:25:02 ; \\****************************************// ; ; I 17:30:25 ImgBurn Version 2.1.0.0 started! I 17:30:25 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2) I 17:30:25 Initialising SPTI... I 17:30:25 Searching for SCSI / ATAPI devices... I 17:30:26 Found 1 DVD-ROM and 1 DVD?RW! I 17:42:54 Operation Started! I 17:42:54 Source File: C:\Documents and Settings\Chris Visinho\My Documents\My DVDs\UNKNOWN.ISO I 17:42:54 Source File Sectors: 2,118,499 (MODE1/2048) I 17:42:54 Source File Size: 4,338,685,952 bytes I 17:42:54 Source File Volume Identifier: UNKNOWN I 17:42:54 Source File Implementation Identifier: DVD Shrink I 17:42:55 Source File File System(s): ISO9660, UDF (1.02) I 17:42:55 Destination Device: [0:2:0] TSSTcorp DVD+-RW TS-H553A DE04 (E:) (ATAPI) I 17:42:55 Destination Media Type: DVD-R (Disc ID: PRODISCG02) (Speeds: 2x) I 17:42:55 Destination Media Sectors: 2,298,496 I 17:42:55 Write Mode: DVD I 17:42:55 Write Type: DAO I 17:42:55 Write Speed: 8x I 17:42:55 Link Size: Auto I 17:42:55 Test Mode: Yes I 17:42:55 BURN-Proof: Enabled I 17:42:55 Filling Buffer... I 17:42:55 Writing LeadIn... I 17:43:03 Abort Request Acknowledged I 17:43:04 Synchronising Cache... I 17:49:44 Cycling Tray after Test Write... E 17:49:48 Failed to Write Image! E 17:49:48 Operation Aborted! - Duration: 00:06:53 I 17:49:48 Average Write Rate: 0 KB/s (0.0x) - Maximum Write Rate: 0 KB/s (0.0x) I 17:51:33 Operation Started! I 17:51:33 Source File: C:\Documents and Settings\Chris Visinho\My Documents\My DVDs\UNKNOWN.ISO I 17:51:33 Source File Sectors: 2,118,499 (MODE1/2048) I 17:51:33 Source File Size: 4,338,685,952 bytes I 17:51:33 Source File Volume Identifier: UNKNOWN I 17:51:33 Source File Implementation Identifier: DVD Shrink I 17:51:33 Source File File System(s): ISO9660, UDF (1.02) I 17:51:33 Destination Device: [0:2:0] TSSTcorp DVD+-RW TS-H553A DE04 (E:) (ATAPI) I 17:51:33 Destination Media Type: DVD-R (Disc ID: PRODISCG02) (Speeds: 2x) I 17:51:33 Destination Media Sectors: 2,298,496 I 17:51:33 Write Mode: DVD I 17:51:33 Write Type: DAO I 17:51:33 Write Speed: 2.4x I 17:51:33 Link Size: Auto I 17:51:33 Test Mode: Yes I 17:51:33 BURN-Proof: Enabled I 17:51:34 Filling Buffer... I 17:51:34 Writing LeadIn... I 17:51:43 Writing Image... I 18:17:47 Synchronising Cache... I 18:18:29 Image MD5: 5dbda0a6e0505cba8a5334658f9b67f3 I 18:18:32 Operation Successfully Completed! - Duration: 00:26:55 I 18:18:32 Average Write Rate: 2,709 KB/s (2.0x) - Maximum Write Rate: 2,809 KB/s (2.0x) I 18:25:02 Close Request Acknowledged I 18:25:02 Closing Down... I 18:25:02 Shutting down SPTI... I 18:25:02 ImgBurn closed! Uncheck the box that says Test Mode. When using Test Mode nothing gets written to the disc.
LIGHTNING UK! Posted February 12, 2007 Posted February 12, 2007 Oh and don't cancel a burn once it has started! You were lucky test mode was enabled that time or you'd have just made yourself a nice coaster!
Shamus_McFartfinger Posted February 12, 2007 Posted February 12, 2007 I 17:42:55 Destination Media Type: DVD-R (Disc ID: PRODISCG02) (Speeds: 2x) You might want to look at some better media as well. Prodisc are rubbish. Get some Taiyo Yuden or Verbatim media.
lfcrule1972 Posted February 12, 2007 Posted February 12, 2007 Do they really only support 2x write speeds or is a firmware upgrade in order ? Mmm I love drives like yours, rpc1.org doesn't even list that drive and when I did a Google I found a few posts about fw's not being available and eventually one that listed the same fw as you have so I guess it must just be crap media.
cvisinho Posted February 12, 2007 Author Posted February 12, 2007 I 17:42:55 Destination Media Type: DVD-R (Disc ID: PRODISCG02) (Speeds: 2x) You might want to look at some better media as well. Prodisc are rubbish. Get some Taiyo Yuden or Verbatim media. It can write up to 16X, I was just trying it at a different speed that particular time. On another crappy note, the one that did burn after i unchecked test had no sound???? But after realizing it it was only the previews. Then i did another burn and it was the correct file but there was an error message 96% through. Is there something small im missing for the sound issue?
polopony Posted February 12, 2007 Posted February 12, 2007 I 17:42:55 Destination Media Type: DVD-R (Disc ID: PRODISCG02) (Speeds: 2x) You might want to look at some better media as well. Prodisc are rubbish. Get some Taiyo Yuden or Verbatim media. It can write up to 16X, I was just trying it at a different speed that particular time. On another crappy note, the one that did burn after i unchecked test had no sound???? But after realizing it it was only the previews. Then i did another burn and it was the correct file but there was an error message 96% through. Is there something small im missing for the sound issue? it may be rated to write up to 16x but the firmware for the drive only supports those discs (and they are crap ) at 2x and only 2x you might choose what ever speed you want but the write strategy is for 2x. To straighten out your problem start with good media Verbatim or Yuden like has been posted above and go from there its no good trying to get a perfect disc when you start with poor media . You have to match your media and drive for compatibility then burn the discs at one of the supported write speeds that the firmware supports .The sound issue may be a few things possibly the audio on the disc is not supported by your player ,but untill you start with good media who knows it may be all media related
MarkC Posted February 12, 2007 Posted February 12, 2007 It can write up to 16X, I was just trying it at a different speed that particular time. Having made the mistake of buying some of these awful discs before... You will indeed find thay they can write at up to 16x, what you will also find however, is that only some of them will then verify at any speed. ?And you are virtually guarenteed that when you come and try to read them back in a couple of months or years, that you will find you have a very fine collection of shiny coasters that you can scare birds out of the garden with. ?What you will probably not have is any usable data. ?I moved on from Prodisc to better quality dyes, and now some of them won't read after a few months. The mantra around here is buy Taiyo-Yudens if you want to read stuff back off your discs. Mark
cvisinho Posted February 12, 2007 Author Posted February 12, 2007 It can write up to 16X, I was just trying it at a different speed that particular time. Having made the mistake of buying some of these awful discs before... You will indeed find thay they can write at up to 16x, what you will also find however, is that only some of them will then verify at any speed. ?And you are virtually guarenteed that when you come and try to read them back in a couple of months or years, that you will find you have a very fine collection of shiny coasters that you can scare birds out of the garden with. ?What you will probably not have is any usable data. ?I moved on from Prodisc to better quality dyes, and now some of them won't read after a few months. The mantra around here is buy Taiyo-Yudens if you want to read stuff back off your discs. Mark Thanks alot guys, i will definately look into better media.
Shamus_McFartfinger Posted February 12, 2007 Posted February 12, 2007 Good idea. Throw the Prodisc in the bin. You're better off just cutting your losses and buying quality media like Verbatim than trying to solve problems that are caused by bad disks. All of us here have learned the hard way.
cvisinho Posted February 14, 2007 Author Posted February 14, 2007 Good idea. Throw the Prodisc in the bin. You're better off just cutting your losses and buying quality media like Verbatim than trying to solve problems that are caused by bad disks. All of us here have learned the hard way. Went out and got some Verbatims, video quality is sweet but no sound here is the log I 19:31:57 ImgBurn Version 2.1.0.0 started! I 19:31:57 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2) I 19:31:58 Initialising SPTI... I 19:31:58 Searching for SCSI / ATAPI devices... I 19:32:07 Found 1 DVD-ROM and 1 DVD?RW! I 19:36:39 Operation Started! I 19:36:39 Source File: C:\Documents and Settings\Chris Visinho\My Documents\My DVDs\UNKNOWN.ISO I 19:36:39 Source File Sectors: 2,118,499 (MODE1/2048) I 19:36:39 Source File Size: 4,338,685,952 bytes I 19:36:39 Source File Volume Identifier: UNKNOWN I 19:36:39 Source File Implementation Identifier: DVD Shrink I 19:36:39 Source File File System(s): ISO9660, UDF (1.02) I 19:36:39 Destination Device: [0:2:0] TSSTcorp DVD+-RW TS-H553A DE04 (E:) (ATAPI) I 19:36:39 Destination Media Type: DVD-R (Disc ID: MCC 03RG20) (Speeds: 4x, 8x, 12x, 16x) I 19:36:39 Destination Media Sectors: 2,298,496 I 19:36:39 Write Mode: DVD
volvofl10 Posted February 14, 2007 Posted February 14, 2007 you need to ascertain that there is sound in your source file , use winamp,vlc media player,windoze media player or media player classic . ImgBurn will burn what its presented with, so no audio in the source usually means no audio in the end result. another possibility is that your player does not like these discs , yes, it is a balancing act between decent media your burner likes and decent media your standalone player likes as well when you posta log file, you need to post all of it. your last one has been cut short
Shamus_McFartfinger Posted February 14, 2007 Posted February 14, 2007 Went out and got some Verbatims, video quality is sweet but no sound If there's sound in the ISO there'll be sound on the disk. Are you sure you've selected the correct audio stream for playback before burning to DVD? For example, you may have set DTS audio instead of 5.1ch audio. Not good if your player doesn't support DTS.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now