Jump to content

Can not verify burn


h3lladvocate

Recommended Posts

So i create a Video_ts folder and an iso using the build command in imgburn. im gussing it made a good iso so i try to burn it to my HP DVD+ 16x disks. I run it a 12x, it succeeds at that but cannot verify. Here is the log file

 

I 19:24:55 ImgBurn Version 2.2.0.0 started!

I 19:24:55 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2)

I 19:24:55 Total Physical Memory: 1,047,016 KB - Available: 553,292 KB

W 19:24:55 Drive D:\ (FAT32) does not support single files > 4 GB in size.

I 19:24:55 Initialising SPTI...

I 19:24:55 Searching for SCSI / ATAPI devices...

I 19:24:55 Found 1 DVD?RW!

I 19:37:27 Operation Started!

I 19:37:27 Source File: C:\disk.iso

I 19:37:27 Source File Sectors: 1,910,592 (MODE1/2048)

I 19:37:27 Source File Size: 3,912,892,416 bytes

I 19:37:27 Source File Volume Identifier: OURAN_HOST_CLUB_1_6

I 19:37:27 Source File Application Identifier: IMGBURN V2.2.0.0 - THE ULTIMATE IMAGE BURNER!

I 19:37:27 Source File Implementation Identifier: ImgBurn

I 19:37:27 Source File File System(s): ISO9660, UDF (1.02)

I 19:37:27 Destination Device: [3:0:0] TSSTcorp CD/DVDW TS-H552L 0614 (E:) (ATA)

I 19:37:27 Destination Media Type: DVD+R (Disc ID: CMC MAG-M01-00) (Speeds: 4x, 8x, 12x, 16x)

I 19:37:27 Destination Media Sectors: 2,295,104

I 19:37:27 Write Mode: DVD

I 19:37:27 Write Type: DAO

I 19:37:27 Write Speed: 12x

I 19:37:27 Link Size: Auto

I 19:37:27 Test Mode: No

I 19:37:27 BURN-Proof: Enabled

I 19:37:27 Filling Buffer... (20 MB)

I 19:37:28 Writing LeadIn...

I 19:37:42 Writing Image...

I 19:42:41 Synchronising Cache...

I 19:42:47 Closing Track...

I 19:42:50 Finalising Disc...

I 19:43:02 Image MD5: 422b0e6974f99e5e6d0a8b4c41409966

I 19:43:02 Exporting Graph Data...

I 19:43:02 Graph Data File: C:\Program Files\ImgBurn\TSSTcorp_CD-DVDW_TS-H552L_0614_THURSDAY-FEBRUARY-22-2007_7-37_PM_CMC_MAG-M01-00_12x.ibg

I 19:43:02 Export Successfully Completed!

I 19:43:02 Operation Successfully Completed! - Duration: 00:05:34

I 19:43:02 Average Write Rate: 12,822 KB/s (9.3x) - Maximum Write Rate: 16,777 KB/s (12.1x)

I 19:43:02 Cycling Tray before Verify...

W 19:43:09 Waiting for device to become ready...

I 19:43:24 Device Ready!

I 19:43:25 Operation Started!

I 19:43:25 Source Device: [3:0:0] TSSTcorp CD/DVDW TS-H552L 0614 (E:) (ATA)

I 19:43:25 Source Media Type: DVD+R (Book Type: DVD-ROM) (Disc ID: CMC MAG-M01-00) (Speeds: 4x, 8x, 12x, 16x)

I 19:43:25 Image File: C:\disk.iso

I 19:43:25 Image File Sectors: 1,910,592 (MODE1/2048)

I 19:43:25 Image File Size: 3,912,892,416 bytes

I 19:43:25 Image File Volume Identifier: OURAN_HOST_CLUB_1_6

I 19:43:25 Image File Application Identifier: IMGBURN V2.2.0.0 - THE ULTIMATE IMAGE BURNER!

I 19:43:25 Image File Implementation Identifier: ImgBurn

I 19:43:25 Image File File System(s): ISO9660, UDF (1.02)

I 19:43:25 Verifying Sectors... (LBA: 0 - 1910591)

W 19:43:52 Failed to read Sector 0 - Timeout on Logical Unit

W 19:44:00 Failed to read Sector 1 - Timeout on Logical Unit

W 19:44:08 Failed to read Sector 2 - Timeout on Logical Unit

W 19:44:23 Failed to read Sector 3 - Timeout on Logical Unit

W 19:44:31 Failed to read Sector 4 - Timeout on Logical Unit

I 19:44:37 Abort Request Acknowledged

E 19:44:38 Failed to Verify Sectors!

I 19:44:38 Exporting Graph Data...

I 19:44:38 Graph Data File: C:\Program Files\ImgBurn\TSSTcorp_CD-DVDW_TS-H552L_0614_THURSDAY-FEBRUARY-22-2007_7-37_PM_CMC_MAG-M01-00_12x.ibg

I 19:44:38 Export Successfully Completed!

E 19:44:38 Operation Aborted! - Duration: 00:01:13

I 19:44:38 Average Verify Rate: 0 KB/s (0.0x) - Maximum Verify Rate: 0 KB/s (0.0x)

I 19:44:40 Close Request Acknowledged

I 19:44:40 Closing Down...

I 19:44:40 Shutting down SPTI...

I 19:44:40 ImgBurn closed!

 

i had to manual shutdown because it was failing to verify every sector. Can someone help?

Link to comment
Share on other sites

h3lladvocate, Destination Media Type: DVD+R (Disc ID: CMC MAG-M01-00) These are jus crappy media, this is probabley the reason for your failing verifys. Get some verbatim DLs and try the same burn again.

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.