Failed to Read Sector 1 - Logical Block Address out of Range

[remarquian]

So I'm using ImgBurn Version 2.3.0.0 with a samsung SH-S182D burning on TYG02 discs. The burn completes just fine, the verify fails on the first sector (see below). When I cancel out of ImgBurn, and start it up again, it sez the disk is empty [Nero thinks it's empty too, but fails on it]. I've tried uninstalling and installing ImgBurn, and get the same results.

 

However NeroExpress works fine with the same drive and media.

 

Any ideas?

 

rob

 

 

I 19:09:30 ImgBurn Version 2.3.0.0 started!

I 19:09:30 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 19:09:30 Total Physical Memory: 1,048,048 KB - Available: 646,132 KB

I 19:09:30 Initialising SPTI...

I 19:09:30 Searching for SCSI / ATAPI devices...

I 19:09:31 Found 1 DVD?RW/RAM!

I 19:15:34 Operation Started!

I 19:15:34 Source File: C:\NIP_TUCK_SEASON3_D1.ISO

I 19:15:34 Source File Sectors: 2,285,851 (MODE1/2048)

I 19:15:34 Source File Size: 4,681,422,848 bytes

I 19:15:34 Source File Volume Identifier: NIP_TUCK_SEASON3_D1

I 19:15:34 Source File Implementation Identifier: DVD Shrink

I 19:15:34 Source File File System(s): ISO9660, UDF (1.02)

I 19:15:34 Destination Device: [2:0:0] TSSTcorp CD/DVDW SH-S182D SB05 (D:) (ATA)

I 19:15:34 Destination Media Type: DVD-R (Disc ID: TYG02) (Speeds: 4x, 8x)

I 19:15:34 Destination Media Sectors: 2,298,496

I 19:15:34 Write Mode: DVD

I 19:15:34 Write Type: DAO

I 19:15:34 Write Speed: MAX

I 19:15:34 Link Size: Auto

I 19:15:34 Test Mode: No

I 19:15:34 BURN-Proof: Enabled

I 19:15:35 Filling Buffer... (20 MB)

I 19:15:36 Writing LeadIn...

I 19:16:02 Writing Image... (LBA: 0 - 2285850)

I 19:23:42 Synchronising Cache...

I 19:23:58 Image MD5: e2608840536901961e012d4621d2cc8c

I 19:23:58 Operation Successfully Completed! - Duration: 00:08:23

I 19:23:58 Average Write Rate: 9,960 KB/s (7.2x) - Maximum Write Rate: 11,285 KB/s (8.1x)

I 19:23:58 Cycling Tray before Verify...

W 19:24:04 Waiting for device to become ready...

I 19:24:45 Device Ready!

I 19:24:45 Operation Started!

I 19:24:45 Source Device: [2:0:0] TSSTcorp CD/DVDW SH-S182D SB05 (D:) (ATA)

I 19:24:45 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: TYG02) (Speeds: 4x, 8x)

I 19:24:45 Image File: C:\NIP_TUCK_SEASON3_D1.ISO

I 19:24:45 Image File Sectors: 2,285,851 (MODE1/2048)

I 19:24:45 Image File Size: 4,681,422,848 bytes

I 19:24:45 Image File Volume Identifier: NIP_TUCK_SEASON3_D1

I 19:24:45 Image File Implementation Identifier: DVD Shrink

I 19:24:45 Image File File System(s): ISO9660, UDF (1.02)

I 19:24:45 Verifying Sectors... (LBA: 0 - 2285850)

W 19:25:56 Failed to Read Sector 0 - Logical Block Address out of Range

W 19:25:57 Failed to Read Sector 1 - Logical Block Address out of Range

W 19:26:13 Failed to Read Sector 2 - Logical Block Address out of Range

W 19:26:14 Failed to Read Sector 3 - Logical Block Address out of Range

W 19:26:15 Failed to Read Sector 4 - Logical Block Address out of Range

E 19:32:44 Failed to Read Sector 5 - Logical Block Address out of Range

E 19:32:44 Failed to Verify Sectors!

E 19:32:45 Operation Failed! - Duration: 00:07:59

I 19:32:45 Average Verify Rate: 0 KB/s (0.0x) - Maximum Verify Rate: 0 KB/s (0.0x)

[LIGHTNING UK!]

It looks like the drive is producing duff burns and is unable to reinitialise the disc properly after ejecting / reinserting it.

 

This sort of stuff is beyond the control of software. The drive just isn't doing what it's told.

[remarquian]

The issue seems to be that the samsung SH-S182D has issues with DVD-R. Apparently the leadin is written improperly, and the drive can't read the discs it has written on certain media (whereas the work are readable with my Sony DVD player).

 

Back to the store the drive goes.

 

Thanks for your help,

 

rob