Freezing up at layer break.... HELP

[HTNUTS]

I've been making copys of my new discs using Shrink (v3.2) and Imgburn (v2.3). I usually rip to a iso file that I designate to my desktop. From there I drag it into Imgburn set in the 'write' mode. Once I insert a blank disc (Verbatim) and click on little burn icon, it automatically starts the process. I never have a choice of layer break point. As a result, I'm freezing at most of my break points.

Any help would be most appreciated. Below is my latest copy that froze up.

 

 

I 15:41:03 ImgBurn Version 2.2.0.0 started!

I 15:41:03 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)

I 15:41:03 Total Physical Memory: 1,047,556 KB - Available: 583,692 KB

I 15:41:03 Initialising SPTI...

I 15:41:03 Searching for SCSI / ATAPI devices...

I 15:41:03 Found 1 DVD-ROM and 1 DVD?RW!

I 15:42:04 Operation Started!

I 15:42:04 Source File: C:\Documents and Settings\Mark\Desktop\HAPPY_FEET.ISO

I 15:42:04 Source File Sectors: 3,226,154 (MODE1/2048)

I 15:42:04 Source File Size: 6,607,163,392 bytes

I 15:42:04 Source File Volume Identifier: HAPPY_FEET

I 15:42:04 Source File Implementation Identifier: DVD Shrink

I 15:42:04 Source File File System(s): ISO9660, UDF (1.02)

I 15:42:04 Destination Device: [1:0:0] Memorex 16X-DDL-IN 1.A3 (D:) (ATA)

I 15:42:04 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 6x, 8x)

I 15:42:04 Destination Media Sectors: 4,173,824

I 15:42:04 Write Mode: DVD

I 15:42:04 Write Type: DAO

I 15:42:04 Write Speed: 3x

I 15:42:04 Link Size: Auto

I 15:42:04 Test Mode: No

I 15:42:04 BURN-Proof: Enabled

W 15:42:09 Optimal L1 Data Zone Start LBA: None Found! (VTS_01)

I 15:42:09 Optimal L0 Data Zone Capacity: 1,613,440

I 15:42:09 Optimal L0 Data Zone Method: ECC Block Boundary, VOBU Boundary

I 15:42:36 Filling Buffer... (20 MB)

I 15:42:37 Writing LeadIn...

I 15:42:38 Writing Image...

I 15:42:38 Writing Layer 0... (LBA: 0 - 1613439)

I 15:58:47 Writing Layer 1... (LBA: 1613440 - 3226153)

I 16:15:26 Synchronising Cache...

I 16:15:27 Closing Track...

I 16:15:48 Finalising Disc...

I 16:16:40 Image MD5: 5d80a37329de2b7b2ebafbb18e22c151

I 16:16:41 Operation Successfully Completed! - Duration: 00:34:36

I 16:16:41 Average Write Rate: 3,280 KB/s (2.4x) - Maximum Write Rate: 3,465 KB/s (2.5x)

I 16:16:41 Cycling Tray before Verify...

I 16:17:07 Device Ready!

I 16:17:07 Operation Started!

I 16:17:07 Source Device: [1:0:0] Memorex 16X-DDL-IN 1.A3 (D:) (ATA)

I 16:17:07 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 6x, 8x)

I 16:17:07 Image File: C:\Documents and Settings\Mark\Desktop\HAPPY_FEET.ISO

I 16:17:07 Image File Sectors: 3,226,154 (MODE1/2048)

I 16:17:07 Image File Size: 6,607,163,392 bytes

I 16:17:07 Image File Volume Identifier: HAPPY_FEET

I 16:17:07 Image File Implementation Identifier: DVD Shrink

I 16:17:07 Image File File System(s): ISO9660, UDF (1.02)

I 16:17:07 Read Speed: 10x

W 16:17:07 [1:0:0] Memorex 16X-DDL-IN 1.A3 (D:) (ATA) - Selected Read Speed: 13,850 KB/s (10x)

W 16:17:07 [1:0:0] Memorex 16X-DDL-IN 1.A3 (D:) (ATA) - Actual Read Speed: 11,080 KB/s (8x)

I 16:17:07 Verifying Sectors... (LBA: 0 - 3226153)

I 16:34:06 Device MD5: 5d80a37329de2b7b2ebafbb18e22c151

I 16:34:06 Device (Padded) MD5: 963a4de37e7f74d29b325c33379b87e8

I 16:34:06 Image MD5: 5d80a37329de2b7b2ebafbb18e22c151

I 16:34:07 Operation Successfully Completed! - Duration: 00:16:59

I 16:34:07 Average Verify Rate: 6,332 KB/s (4.6x) - Maximum Verify Rate: 9,321 KB/s (6.7x)

I 16:35:34 Close Request Acknowledged

I 16:35:34 Closing Down...

I 16:35:35 Shutting down SPTI...

I 16:35:35 ImgBurn closed!

[polopony]

dont use Shrink to make the ISO its not able to do the LB correctly, use IB in Build mode and you should be OK