Jump to content

Recommended Posts

Posted

Hi, anyone knows about this dvds : TDK DVD+RW 8x ?

I cannot write on it, I tried many programs, could format it sometimes but I get some errors at writing, erasing, formatting or after at reading.

And it accepts only speed 2.4x instead of 8x.

 

For example this error at writing (popup window) :

Synchronise Cache Failed !

Device [0:0:0] ...

Reason : Write Error

 

Here is the log :

I 11:58:59 ImgBurn Version 2.3.0.0 started!

I 11:58:59 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 11:58:59 Total Physical Memory: 1 046 952 KB - Available: 69 184 KB

W 11:58:59 Drive H:\ (FAT32) does not support single files > 4 GB in size.

I 11:59:00 Initialising SPTI...

I 11:59:00 Searching for SCSI / ATAPI devices...

I 11:59:01 Found 1 DVD?RW!

I 11:59:17 Operation Started!

I 11:59:17 Device: [0:0:0] TSSTcorp CD/DVDW TS-H552B HP13 (I:) (ATA)

I 11:59:17 Media Type: DVD+RW (Disc ID: RICOHJPN-W21-01) (Speeds: 2,4x)

I 11:59:17 Quick Erase: No

I 11:59:17 Erasing Disc...

I 12:24:41 Operation Successfully Completed! - Duration: 00:25:23

I 13:18:21 Operation Started!

I 13:18:21 Source File: G:\Bird_DVD.nrg

I 13:18:21 Source File Sectors: 1 836 584 (MODE1/2048)

I 13:18:21 Source File Size: 3 761 324 032 bytes

I 13:18:21 Source File Volume Identifier: UNDEFINED

I 13:18:21 Source File Implementation Identifier: AuthoringWare Co. USA

I 13:18:21 Source File File System(s): ISO9660; UDF (1.02)

I 13:18:21 Destination Device: [0:0:0] TSSTcorp CD/DVDW TS-H552B HP13 (I:) (ATA)

I 13:18:21 Destination Media Type: DVD+RW (Disc ID: RICOHJPN-W21-01) (Speeds: 2,4x)

I 13:18:21 Destination Media Sectors: 2 295 104

I 13:18:21 Write Mode: DVD

I 13:18:21 Write Type: DAO

I 13:18:21 Write Speed: 2,4x

I 13:18:21 Link Size: Auto

I 13:18:21 Test Mode: No

I 13:18:21 BURN-Proof: Enabled

I 13:18:50 Filling Buffer... (20 MB)

I 13:18:51 Writing LeadIn...

I 13:18:52 Writing Image... (LBA: 0 - 1836583)

I 13:37:22 Synchronising Cache...

W 13:37:26 Potential 'WaitImmediateIO' Deferred Error - (0/2) - Write Error

I 13:41:58 Closing Session...

I 13:41:59 Image MD5: e82d83539b9a1c9c26428305dd533942

I 13:41:59 Operation Successfully Completed! - Duration: 00:23:37

I 13:41:59 Average Write Rate: 3 312 KB/s (2.4x) - Maximum Write Rate: 3 413 KB/s (2.5x)

 

And then, the dvd player doesn't stop showing that it is reading (green light).

So I eject the dvd manually after 10 min.

And when I put it back, windows shows it as "cd player" and says it cannot access to the drive.

 

And the information is :

TSSTcorp CD/DVDW TS-H552B HP13 (ATA)

Current Profile: DVD+RW

 

Disc Information:

Status: Complete

Erasable: Yes

Formatted: Yes

Supported Write Speeds: 2,4x

 

TOC Information:

Session 1...

-> Track 01 (Mode 1, LBA: 0 - 2295103)

-> LeadOut (LBA: 2295104)

 

Physical Format Information (ADIP):

Disc ID: RICOHJPN-W21-01

Book Type: DVD+RW

Part Version: 3

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 1

Track Path: Parallel Track Path (PTP)

Linear Density: 0.267 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196 608

Last Physical Sector of Data Area: 2 491 711

Last Physical Sector in Layer 0: 0

 

Physical Format Information (Last Recorded):

Disc ID: RICOHJPN-W21-01

Book Type: DVD-ROM

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 1

Track Path: Parallel Track Path (PTP)

Linear Density: 0.267 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196 608

Last Physical Sector of Data Area: 2 491 711

Last Physical Sector in Layer 0: 0

 

Current Format Capacity:

Sectors: 2 295 104

Size: 4 700 372 992 bytes

Time: 510:03:29 (MM:SS:FF)

 

Preferred Format Capacity:

Sectors: 2 295 104

Size: 4 700 372 992 bytes

Time: 510:03:29 (MM:SS:FF)

 

Maximum Format Capacity:

Sectors: 2 295 104

Size: 4 700 372 992 bytes

Time: 510:03:29 (MM:SS:FF)

 

I would appreciate any help :) thanx

Posted

its not the media that accepts 2.4x its your drives firmware that only supports that speed .Look for newer firmware and some different discs your drive doesn't like them very much

Posted

okay guys, thank you. The pbm is that I already updated the firmware : HP13 (my pc is a HP Pavilion). So I guess there's no other way than getting others discs.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.