'Ol Dad Posted April 13, 2007 Posted April 13, 2007 When I try to write (backing up movies and data) I get the following message: "Disc Not Empty". This has occured with Sony, Phillips, Verbatim (sometimes) & Memorex (first time, new spindle) DVDs. It has not occured with NexxTech or Office Depot branded discs. Any ideas or is this something done by the disc manufacturers.
mmalves Posted April 13, 2007 Posted April 13, 2007 With ImgBurn in Write mode, could you copy and paste here all the text that's shown on the right of ImgBurn?
'Ol Dad Posted April 13, 2007 Author Posted April 13, 2007 (edited) When I try to write (backing up movies and data) I get the following message: "Disc Not Empty". This has occured with Sony, Phillips, Verbatim (sometimes) & Memorex (first time, new spindle) DVDs. It has not occured with NexxTech or Office Depot branded discs. Any ideas or is this something done by the disc manufacturers. I can't cut or past, but the info in the right widow is: Sony DVD RW DRU-710A BY01 (ATA) Current Profiles: DVD-R Disc Information Status: Complete Erasable: No Sessions: 1 Free Sectors: 2,297,888 Free Space: 4,706,074,624 bytes Free Time: 570:40:38 (MM:SS:FF) Supported Write Speeds: 1X, 2X, 4X Physical Format Information (Last Recorded) Book Type: DVD-R Part Versions: 5 Disc Size: 120mm Maximun Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/bit First Physical Sector of Data: 196,608 Last Physical Sector of Data: 0 Last Physical Sector in Layer: 0 The file was imported from DVD Shrink File Sys: ISO9660, UDF (1.02), Sectors: 2,177,055 (MODE1/2048) Size: 4,458,608,640 bytes Time: 483:49:40 (MM:FF:SS) Are these discs imcompatable with ImgBurn for some reason? I'm at a loss because some discs work and others dont't when they have the same specifications. Also, most of the info above doesn't mean much to me. Anyway, I would welcome any comments, ideas, or referals. Edited April 13, 2007 by 'Ol Dad
polopony Posted April 13, 2007 Posted April 13, 2007 copy and paste ,find the info you want to copy,hold the left mouse button down and run the mouse over all the text you want to copy untill it becomes highlighted when it is right click the mouse and choose copy ,hit add reply in this forum and when the cursor is blinking right click the mouse and click paste done the discs have nothing to do with IMGburn compatibility wise its your drive that will have issues with the media the firmware (instructions for the drive ) you're running is the one it was sold with and its quite a few versions behind and needs updating, to do this open IB and in the destination box right click on your SONY 710 a menu will open and the last line is firmware update click on it ,it will show your firmware version and then go through the steps and you will download the newest firmware open the file and with the falsher utility load the newest instructions for your drive the info in the IB window should look like this _NEC DVD_RW ND-3500AG 2.1B (ATA) Current Profile: DVD-R Disc Information: Status: Complete Erasable: No Sessions: 1 Sectors: 2,285,848 Size: 4,681,416,704 bytes Time: 507:59:73 (MM:SS:FF) Supported Write Speeds: 2x, 4x, 6x, 8x, 12x, 16x TOC Information: Session 1... -> Track 01 (Mode 1, LBA: 0 - 2285847) -> LeadOut (LBA: 2285856) Pre-recorded Information: Manufacturer ID: MCC 03RG20 Recording Management Area Information: _NEC DVD_RW ND-3500AG Physical Format Information (Last Recorded): Disc ID: 0@P-!-00 Book Type: DVD-R Part Version: 5 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 2,482,455 Last Physical Sector in Layer 0: 0
LIGHTNING UK! Posted April 13, 2007 Posted April 13, 2007 Try the BYX5 firmware. http://sony.storagesupport.com/dvdrw/firmware.htm#710
'Ol Dad Posted April 13, 2007 Author Posted April 13, 2007 To mmalves, polopony and LIGHTNING UK; Thanks for the help. Did like all of you suggested and ImgBurn works like a champ now. My system (Sony) is supposed to have auto-updates like Windows but apparently it is not working/available. 'Ol Dad
Recommended Posts