Jump to content

Recommended Posts

Posted

Just lately I have been having problems with Img Burn, it takes several minutes for the img to be begin burning.... and quite often it will error when trying to finalize... The latest burn session is below, any ideas would be appreciated...

 

I 06:31:40 ImgBurn Version 2.3.2.0 started!

I 06:31:40 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2)

I 06:31:40 Total Physical Memory: 2,094,528 KB - Available: 1,656,988 KB

W 06:31:40 Drive E:\ (FAT32) does not support single files > 4 GB in size.

I 06:31:40 Initialising SPTI...

I 06:31:40 Searching for SCSI / ATAPI devices...

I 06:32:04 Found 1 DVD-ROM and 1 DVD?RW!

I 06:32:29 Operation Started!

I 06:32:29 Source File: D:\_Temp\Video\FAMILYGUY_VOL3_D1.ISO

I 06:32:29 Source File Sectors: 2,226,771 (MODE1/2048)

I 06:32:29 Source File Size: 4,560,427,008 bytes

I 06:32:29 Source File Volume Identifier: FAMILYGUY_VOL3_D1

I 06:32:29 Source File Implementation Identifier: DVD Shrink

I 06:32:29 Source File File System(s): ISO9660, UDF (1.02)

I 06:32:29 Destination Device: [0:0:0] HL-DT-ST DVD-RW GWA-4165B DG01 (F:) (ATA)

I 06:32:29 Destination Media Type: DVD+R (Disc ID: SONY-D21-00) (Speeds: 4x, 8x, 12x, 16x)

I 06:32:29 Destination Media Sectors: 2,295,104

I 06:32:29 Write Mode: DVD

I 06:32:29 Write Type: DAO

I 06:32:29 Write Speed: 8x

I 06:32:29 Link Size: Auto

I 06:32:29 Test Mode: No

I 06:32:29 BURN-Proof: Enabled

I 06:32:29 Filling Buffer... (40 MB)

I 06:32:30 Writing LeadIn...

I 06:37:37 Writing Image... (LBA: 0 - 2226770)

W 06:46:35 Failed to Write Sectors 2178304 - 2178335 - Unknown (Internal Target Failure) (0x44, 0x86)

W 06:46:35 Retrying (1 of 20)...

W 06:46:35 Retry Failed - Invalid Address For Write

W 06:46:35 Retrying (2 of 20)...

W 06:46:35 Retry Failed - Invalid Address For Write

W 06:46:35 Retrying (3 of 20)...

W 06:46:35 Retry Failed - Invalid Address For Write

W 06:46:35 Retrying (4 of 20)...

W 06:46:35 Retry Failed - Invalid Address For Write

W 06:46:35 Retrying (5 of 20)...

W 06:46:35 Retry Failed - Invalid Address For Write

W 06:46:35 Retrying (6 of 20)...

W 06:46:35 Retry Failed - Invalid Address For Write

W 06:46:35 Retrying (7 of 20)...

W 06:46:35 Retry Failed - Invalid Address For Write

W 06:46:35 Retrying (8 of 20)...

W 06:46:35 Retry Failed - Invalid Address For Write

W 06:46:35 Retrying (9 of 20)...

W 06:46:35 Retry Failed - Invalid Address For Write

W 06:46:35 Retrying (10 of 20)...

W 06:46:35 Retry Failed - Invalid Address For Write

W 06:46:35 Retrying (11 of 20)...

W 06:46:35 Retry Failed - Invalid Address For Write

W 06:46:35 Retrying (12 of 20)...

W 06:46:35 Retry Failed - Invalid Address For Write

W 06:46:35 Retrying (13 of 20)...

W 06:46:35 Retry Failed - Invalid Address For Write

W 06:46:35 Retrying (14 of 20)...

W 06:46:35 Retry Failed - Invalid Address For Write

W 06:46:35 Retrying (15 of 20)...

W 06:46:35 Retry Failed - Invalid Address For Write

W 06:46:35 Retrying (16 of 20)...

W 06:46:35 Retry Failed - Invalid Address For Write

W 06:46:35 Retrying (17 of 20)...

W 06:46:35 Retry Failed - Invalid Address For Write

W 06:46:35 Retrying (18 of 20)...

W 06:46:35 Retry Failed - Invalid Address For Write

W 06:46:35 Retrying (19 of 20)...

W 06:46:35 Retry Failed - Invalid Address For Write

W 06:46:35 Retrying (20 of 20)...

W 06:46:35 Retry Failed - Invalid Address For Write

E 06:48:51 Failed to Write Sectors 2178304 - 2178335 - Unknown (Internal Target Failure) (0x44, 0x86)

I 06:48:51 Synchronising Cache...

I 06:48:52 Closing Track...

I 06:48:59 Finalising Disc...

W 06:49:25 Potential 'WaitImmediateIO' Deferred Error - (0/2) - Unknown (Internal Target Failure) (0x44, 0x86)

E 06:49:47 Finalise Disc Failed! - Reason: Unknown (Internal Target Failure) (0x44, 0x86)

I 06:49:47 Finalising Disc (Last Attempt!)...

E 06:49:48 Failed to Write Image!

E 06:49:48 Operation Failed! - Duration: 00:17:19

I 06:49:48 Average Write Rate: 6,473 KB/s (4.7x) - Maximum Write Rate: 8,375 KB/s (6.0x)

 

thanks

KC

Posted

its most likely a case of that drive not liking the media, have you any other blank media you can try ?

also a slower burn sped may help

 

see if you can find a firmware update for that drive GWA-4165B . its in a dell or an HP maybe ?, as its not a boxed retail drive . the retail version was a GSA-4165B NOTE the differant letters

 

the GSA version is firmware DL05 , so theres probably a "DG" prefixed update about somewhere ( your on DG01 firmware version at the moment). Look on the computers manufacturers web site first for any updates.

 

what make of PC is this drive in ?

Posted

have a look on gateways site. i just did, but it wants a serial number for my machine !!!!!!!!! which i dont have of coarse. shame they dont let you search by drive model, it would be easier

Posted

Deffo look for updated firmware as this may fix the problem with the discs but next time you buy get either Taiyo Yuden or Verbatim discs for better compatibility/quality :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.