MeSz Posted April 26, 2007 Posted April 26, 2007 (edited) Just want to say I just recently found out that DVD Decrypter lives on through ImgBurn, something I'm very happy to see and be apart of. Ok, well I just got my PIONEER DVD-RW DVR-112D (firmware 1.09) in today from newegg, along with a 20 pack of Verbatim DVD+R DL's. Now my drive is installed properly, DMA is on. My first 3 burn attempts have turned into 3 expensive, and ugly, coasters for my coffee. I first tried burning an iso that was created by ImgBurn, with the appropriate Layer Break selected. My last attempt was just to try and transfer the files directly to the DVD, but still I have set the Layer Break properly. My error message leads me nowhere (just says unknown) and now I am asking for some outside help. I went through the forums here but have found nothing like the problem I am experiencing, so included is my log (unfortunately I cancelled the verify in frustration so the log is cut off at the end). Any help is appreciated as I am tired of throwing my money down the sh*tter, thanks. I 17:41:14 ImgBurn Version 2.3.2.0 started! I 17:41:14 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 17:41:14 Total Physical Memory: 2,095,856 KB - Available: 1,313,696 KB I 17:41:14 Initialising SPTI... I 17:41:14 Searching for SCSI / ATAPI devices... I 17:41:14 Found 2 DVD-ROMs and 1 DVD?RW! I 17:44:43 Using Layer Break LBA: 2059720 -> 2059728 (VTS_01, PGC: 1, Chapter: 14, Cell: 15, Vob/Cell ID: 1/15, Time: 01:29:57, SPLIP: No) I 17:44:43 Checking Path Length... I 17:44:43 Image Size: 8,276,967,424 bytes I 17:44:43 Image Sectors: 4,041,488 I 17:44:43 Operation Successfully Completed! - Duration: 00:00:22 I 17:46:09 Operation Started! I 17:46:09 Building Image Tree... I 17:46:09 Checking Directory Depth... I 17:46:09 Calculating Totals... I 17:46:09 Preparing Image... I 17:46:12 Using Layer Break LBA: 2059720 -> 2059728 (VTS_01, PGC: 1, Chapter: 14, Cell: 15, Vob/Cell ID: 1/15, Time: 01:29:57, SPLIP: No) I 17:46:12 Checking Path Length... I 17:46:12 Image Size: 8,276,967,424 bytes I 17:46:12 Image Sectors: 4,041,488 I 17:46:12 Operation Successfully Completed! - Duration: 00:00:02 I 17:53:24 Operation Started! I 17:53:24 Building Image Tree... I 17:53:24 Checking Directory Depth... I 17:53:24 Calculating Totals... I 17:53:24 Preparing Image... I 17:54:18 Using Layer Break LBA: 2059720 -> 2059728 (VTS_01, PGC: 1, Chapter: 14, Cell: 15, Vob/Cell ID: 1/15, Time: 01:29:57, SPLIP: No) I 17:54:18 Checking Path Length... I 17:54:18 Image Size: 8,276,967,424 bytes I 17:54:18 Image Sectors: 4,041,488 I 17:54:31 Operation Successfully Completed! - Duration: 00:01:07 I 17:54:31 Operation Started! I 17:54:31 Source File: -==/\/[bUILD IMAGE]\/\==- I 17:54:31 Source File Sectors: 4,041,488 (MODE1/2048) I 17:54:31 Source File Size: 8,276,967,424 bytes I 17:54:31 Source File Volume Identifier: DA_VINCI_CODE I 17:54:31 Source File Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER! I 17:54:31 Source File Implementation Identifier: ImgBurn I 17:54:31 Source File File System(s): ISO9660, UDF (1.02) I 17:54:31 Destination Device: [1:0:0] PIONEER DVD-RW DVR-112D 1.09 (G:) (ATA) I 17:54:31 Destination Media Type: DVD+R DL (Speeds: 2.4x, 4x, 6x, 8x) I 17:54:31 Destination Media Sectors: 4,173,824 I 17:54:31 Write Mode: DVD I 17:54:31 Write Type: DAO I 17:54:31 Write Speed: 2.4x I 17:54:31 Link Size: Auto I 17:54:31 Test Mode: No I 17:54:31 BURN-Proof: Enabled I 17:54:31 Optimal L0 Data Zone Capacity: 2,059,728 I 17:54:31 Optimal L0 Data Zone Method: IFO Cell Boundary, 'SPLIP' Flag Not Set I 17:54:59 Filling Buffer... (40 MB) I 17:55:00 Writing LeadIn... I 17:55:01 Writing Image... (LBA: 0 - 4041487) I 17:55:02 Writing Layer 0... (LBA: 0 - 2059727) W 18:00:26 Failed to Write Sectors 513728 - 513759 - Unknown (0xA8, 0x03) W 18:00:26 Retrying (1 of 20)... W 18:00:26 Retry Failed - Unknown (0xA8, 0x03) W 18:00:26 Retrying (2 of 20)... I 18:00:26 Writing Image... W 18:11:27 Failed to Write Sectors 1571072 - 1571103 - Unknown (0xA8, 0x03) W 18:11:27 Retrying (1 of 20)... I 18:11:27 Writing Image... I 18:16:30 Writing Layer 1... (LBA: 2059728 - 4041487) W 18:25:44 Failed to Write Sectors 2914832 - 2914863 - Unknown (0xA8, 0x03) W 18:25:44 Retrying (1 of 20)... W 18:25:44 Retry Failed - Unknown (0xA8, 0x03) W 18:25:44 Retrying (2 of 20)... W 18:25:44 Retry Failed - Unknown (0xA8, 0x03) W 18:25:44 Retrying (3 of 20)... W 18:25:44 Retry Failed - Unknown (0xA8, 0x03) W 18:25:44 Retrying (4 of 20)... W 18:25:44 Retry Failed - Unknown (0xA8, 0x03) W 18:25:44 Retrying (5 of 20)... W 18:25:44 Retry Failed - Unknown (0xA8, 0x03) W 18:25:44 Retrying (6 of 20)... W 18:25:44 Retry Failed - Unknown (0xA8, 0x03) W 18:25:44 Retrying (7 of 20)... W 18:25:44 Retry Failed - Unknown (0xA8, 0x03) W 18:25:44 Retrying (8 of 20)... W 18:25:44 Retry Failed - Unknown (0xA8, 0x03) W 18:25:44 Retrying (9 of 20)... W 18:25:44 Retry Failed - Unknown (0xA8, 0x03) W 18:25:44 Retrying (10 of 20)... W 18:25:44 Retry Failed - Unknown (0xA8, 0x03) W 18:25:44 Retrying (11 of 20)... W 18:25:44 Retry Failed - Unknown (0xA8, 0x03) W 18:25:44 Retrying (12 of 20)... W 18:25:44 Retry Failed - Unknown (0xA8, 0x03) W 18:25:44 Retrying (13 of 20)... W 18:25:44 Retry Failed - Unknown (0xA8, 0x03) W 18:25:44 Retrying (14 of 20)... W 18:25:44 Retry Failed - Unknown (0xA8, 0x03) W 18:25:44 Retrying (15 of 20)... W 18:25:44 Retry Failed - Unknown (0xA8, 0x03) W 18:25:44 Retrying (16 of 20)... W 18:25:44 Retry Failed - Unknown (0xA8, 0x03) W 18:25:44 Retrying (17 of 20)... W 18:25:44 Retry Failed - Unknown (0xA8, 0x03) W 18:25:44 Retrying (18 of 20)... W 18:25:44 Retry Failed - Unknown (0xA8, 0x03) W 18:25:44 Retrying (19 of 20)... W 18:25:44 Retry Failed - Unknown (0xA8, 0x03) W 18:25:44 Retrying (20 of 20)... I 18:25:44 Writing Image... I 18:37:32 Synchronising Cache... I 18:37:33 Closing Track... I 18:37:34 Finalising Disc... I 18:39:21 Image MD5: 9f7c8b3ea5b1eb70dc995e65a3c6a125 I 18:39:21 Operation Successfully Completed! - Duration: 00:44:49 I 18:39:21 Average Write Rate: 3,169 KB/s (2.3x) - Maximum Write Rate: 3,391 KB/s (2.4x) I 18:39:21 Cycling Tray before Verify... I 18:39:50 Device Ready! I 18:39:50 Operation Started! I 18:39:50 Source Device: [1:0:0] PIONEER DVD-RW DVR-112D 1.09 (G:) (ATA) I 18:39:50 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 6x, 8x) I 18:39:50 Image File: -==/\/[bUILD IMAGE]\/\==- I 18:39:50 Image File Sectors: 4,041,488 (MODE1/2048) I 18:39:50 Image File Size: 8,276,967,424 bytes I 18:39:50 Image File Volume Identifier: DA_VINCI_CODE I 18:39:50 Image File Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER! I 18:39:50 Image File Implementation Identifier: ImgBurn I 18:39:50 Image File File System(s): ISO9660, UDF (1.02) I 18:39:50 Verifying Sectors... (LBA: 0 - 4041487) I 18:39:50 Verifying Layer 0... (LBA: 0 - 2059727) E 18:40:01 Failed to Read Sector 262 - Unknown (0xA8, 0x03) E 18:40:01 Failed to Verify Sectors! E 18:40:01 Operation Failed! - Duration: 00:00:11 I 18:40:01 Average Verify Rate: 47 KB/s (0.0x) - Maximum Verify Rate: 47 KB/s (0.0x) Edited April 26, 2007 by MeSz
Shamus_McFartfinger Posted April 26, 2007 Posted April 26, 2007 Try a firmware update and see if that fixes the problem. http://wwwbsc.pioneer.co.jp/product-e/ibs/...12D_FW115EU.EXE
ecncoolen Posted May 8, 2007 Posted May 8, 2007 I have the same problem with DVD+R DL and DVD-RW. I am using pioneer 112D and a Bytecc USB enclosure with my laptop. The burner only burned 1 disc successfully with only one entry of this error. for other discs I got a lot and the writing will hang there. I will return the burner and enclosure to get out of this trouble. FW has been upgraded to 1.15.
MeSz Posted May 9, 2007 Author Posted May 9, 2007 I RMA'd my drive back to NewEgg, and today my new one just arrived. It is a PIONEER DVD-RW DVR-112D 1.15 (ATA), manufactured March 2007. It already came with the new firmware so I had no need to update. Before trying to burn any media I went through a checklist of things: Read Retail CD? YES Read Burned CD-R? YES Read Burned CD-RW? YES Read Retail DVD? NO Read Burned DVD-R? NO Read Burned DVD+R? NO Read Burned DVD+R DL? NO So twice I've recieved a drive, and twice it has been a complete POS. I went with Pioneer for their name and the fact of having a good prior experience with their hardware but I guess things have changed. This is just a follow up to my post, obvious it was not an issue with ImgBurn, but I thank you guys for your support.
Shamus_McFartfinger Posted May 10, 2007 Posted May 10, 2007 I've had half a dozen Pioneer drives and they've all been brilliant. (Well, except for the 120 which was a lemon). What seems to be the problem with your new drive? Same thing as above? FWIW, I installed a Pioneer 112D a couple of weeks ago and haven't had a drama with it. It's sounds more like a problem related to your drive (IDE controller, ribbon cable, motherboard etc..) rather than the drive itself. Particularly when 2 new drives from a reputable manufacturer fail.
dme Posted June 27, 2007 Posted June 27, 2007 hi there, i have got exactly the same problem: pioneer 112d, 115 fw, verbatim dl, same errorlog. i tried reinstalling win xp, different chipset drivers, different psu, different cable..no success. the coasters i got cost more than the burner itself bc the leadout is written successfully every time. any ideas appreciated.
LIGHTNING UK! Posted June 27, 2007 Posted June 27, 2007 You're getting EXACTLY the same error? W 18:00:26 Failed to Write Sectors 513728 - 513759 - Unknown (0xA8, 0x03) Have you not tried the 1.21 firmware yet?
volvofl10 Posted June 27, 2007 Posted June 27, 2007 what happened to my post ? i dont know, the postman says he put it in your box at 9.15 am today
Recommended Posts