ThaiMantra Posted April 27, 2007 Posted April 27, 2007 Hi! Can't seem to burn from an ISO - can anyone please help out a clueless newbie? My error log: I 22:12:15 ImgBurn Version 2.3.2.0 started! I 22:12:15 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 22:12:15 Total Physical Memory: 777,644 KB - Available: 234,360 KB W 22:12:15 Drive C:\ (FAT32) does not support single files > 4 GB in size. I 22:12:15 Initialising SPTI... I 22:12:15 Searching for SCSI / ATAPI devices... I 22:12:15 Found 1 DVD?RW! I 22:12:36 Operation Started! I 22:12:36 Source File: D:\FESTIVAL_EXPRESS.ISO I 22:12:36 Source File Sectors: 2,285,876 (MODE1/2048) I 22:12:36 Source File Size: 4,681,474,048 bytes I 22:12:36 Source File Volume Identifier: FESTIVAL_EXPRESS I 22:12:36 Source File Implementation Identifier: DVD Shrink I 22:12:36 Source File File System(s): ISO9660, UDF (1.02) I 22:12:36 Destination Device: [1:1:0] Slimtype DVDRW SOSW-833S VRS3 (E:) (ATA) I 22:12:36 Destination Media Type: DVD-R (Disc ID: TTH02) (Speeds: 2x, 4x, 6x, 8x) I 22:12:36 Destination Media Sectors: 2,285,888 I 22:12:36 Write Mode: DVD I 22:12:36 Write Type: DAO I 22:12:36 Write Speed: MAX I 22:12:36 Link Size: Auto I 22:12:36 Test Mode: No I 22:12:36 BURN-Proof: Enabled E 22:12:56 Failed to Reserve Track! - Command Sequence Error E 22:12:58 Operation Failed! - Duration: 00:00:21 I 22:12:58 Average Write Rate: N/A - Maximum Write Rate: N/A Thanks!
dontasciime Posted April 27, 2007 Posted April 27, 2007 Only thing you can do is see what that drive is like with verbatim mcc discs or taiyo yuden You have the latest firmware but you are not alone with problems with this drive. Maybe replace drive or build a usb2 external drive with one of the newer Liteon writers. As well as that the ISO your trying to burn will be very close to the full capacity and extremely close to the edge of the poorest quality part of any media (outer edge) and may fail to write/read back etc after or during burn. Either shrink it a bit more by removing subs/ 2 channel audio or in shrinks options limit output to 4300 instead of 4464mb
ThaiMantra Posted April 27, 2007 Author Posted April 27, 2007 Only thing you can do is see what that drive is like with verbatim mcc discs or taiyo yuden You have the latest firmware but you are not alone with problems with this drive. Maybe replace drive or build a usb2 external drive with one of the newer Liteon writers. As well as that the ISO your trying to burn will be very close to the full capacity and extremely close to the edge of the poorest quality part of any media (outer edge) and may fail to write/read back etc after or during burn. Either shrink it a bit more by removing subs/ 2 channel audio or in shrinks options limit output to 4300 instead of 4464mb Thanks for the quick response! I will try to run a test with a smaller file - I was under the impression that the media and drive I was utilizing, coupled with the reduced writing speed would hace filtered out the obvious errors... OK - I'll limit to 4.2GB and see what happens.... Cheers again for the input!
polopony Posted April 28, 2007 Posted April 28, 2007 all the settings in the world won't cure poor quality media
ThaiMantra Posted April 28, 2007 Author Posted April 28, 2007 I'm using TDK DVD-R Are they not good quality?
Shamus_McFartfinger Posted April 28, 2007 Posted April 28, 2007 The brand name is immaterial. The important bit is the media ID which you can find in your logfile. I 22:12:36 Destination Media Type: DVD-R (Disc ID: TTH02) (Speeds: 2x, 4x, 6x, 8x)
ThaiMantra Posted April 28, 2007 Author Posted April 28, 2007 The brand name is immaterial. The important bit is the media ID which you can find in your logfile. I 22:12:36 Destination Media Type: DVD-R (Disc ID: TTH02) (Speeds: 2x, 4x, 6x, 8x) Sorry, as I said, I'm new to all this... What does the Disc ID: TTH02 mean and why is it bad?
ThaiMantra Posted April 28, 2007 Author Posted April 28, 2007 Managed to burn, finally, at x2.0 Time to get me some verbatim...
Shamus_McFartfinger Posted April 28, 2007 Posted April 28, 2007 The brand name is immaterial. The important bit is the media ID which you can find in your logfile. I 22:12:36 Destination Media Type: DVD-R (Disc ID: TTH02) (Speeds: 2x, 4x, 6x, 8x) Sorry, as I said, I'm new to all this... What does the Disc ID: TTH02 mean and why is it bad? Have a look at http://www.digitalfaq.com/media/dvdmedia.htm and search for TTH02.
blutach Posted April 28, 2007 Posted April 28, 2007 Err Shamus me mate. That site actually lists those disks as top quality. They might actually be 2nd tier, but I don't think they are all that bad (not that I use them). As donta said, the drive has a pretty poor rep. Regards
Shamus_McFartfinger Posted April 29, 2007 Posted April 29, 2007 Sort of.. 1ST CLASS MEDIA: TDKG02, TTG01, TTG02, TTH01, TTH02 , TDK501, TDK502, TDK001, TDK002, TDK003 Taiwan, Japan DVD-R, DVD+R, DVD-RW, DVD+RW some outsourcing Fake DVD Media ID Guide: TTG02, TTH01, TTH02 MAM-America, MAM-Europe 2005 These are apparently "legal" fakes made by Mitsui, with permission by TDK to use the code. However the media is quite poor, not true TDK media.
Recommended Posts