Ashed Posted May 4, 2007 Share Posted May 4, 2007 I 13:41:29 ImgBurn Version 2.1.0.0 started! I 13:41:29 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 13:41:29 Initialising SPTI... I 13:41:29 Searching for SCSI / ATAPI devices... I 13:41:29 Found 1 DVD-ROM, 1 DVD?RW and 1 DVD?RW/RAM! I 13:41:38 Operation Started! I 13:41:38 Source File: F:\IMAGE.dvd I 13:41:38 Source File Sectors: 3,697,696 (MODE1/2048) I 13:41:38 Source File Size: 7,572,881,408 bytes I 13:41:38 Source File Volume Identifier: XBOX360 I 13:41:38 Source File Implementation Identifier: Daikin U.S. Comtec Lab I 13:41:38 Source File File System(s): ISO9660, UDF (1.02) I 13:41:38 Destination Device: [0:1:0] BENQ DVD DD DW1640 BSLB (G:) (ATA) I 13:41:38 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 8x) I 13:41:38 Destination Media Sectors: 4,173,824 I 13:41:38 Write Mode: DVD I 13:41:38 Write Type: DAO I 13:41:38 Write Speed: 2.4x I 13:41:38 Link Size: Auto I 13:41:38 Test Mode: No I 13:41:38 BURN-Proof: Enabled I 13:41:38 Optimal L0 Data Zone Capacity: 1,913,760 I 13:41:38 Optimal L0 Data Zone Method: Copied From Original Disc I 13:41:38 Filling Buffer... I 13:41:39 Writing LeadIn... I 13:41:49 Writing Image... I 13:41:49 Writing Layer 0... (LBA: 0 - 1913759) I 14:02:09 Writing Layer 1... (LBA: 1913760 - 3697695) I 14:21:18 Synchronising Cache... I 14:21:19 Closing Track... I 14:21:25 Finalising Disc... I 14:24:19 Image MD5: 8d9c7fa64b1508e3bffd7b859b1ddc49 I 14:24:20 Operation Successfully Completed! - Duration: 00:42:41 I 14:24:20 Average Write Rate: 3,123 KB/s (2.3x) - Maximum Write Rate: 3,360 KB/s (2.4x) I 14:24:20 Cycling Tray before Verify... W 14:24:30 Waiting for device to become ready... I 14:24:43 Device Ready! I 14:24:43 Operation Started! I 14:24:43 Source Device: [0:1:0] BENQ DVD DD DW1640 BSLB (G:) (ATA) I 14:24:43 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-001-00) I 14:24:43 Image File: F:\IMAGE.dvd I 14:24:43 Image File Sectors: 3,697,696 (MODE1/2048) I 14:24:43 Image File Size: 7,572,881,408 bytes I 14:24:43 Image File Volume Identifier: XBOX360 I 14:24:43 Image File Implementation Identifier: Daikin U.S. Comtec Lab I 14:24:43 Image File File System(s): ISO9660, UDF (1.02) I 14:24:43 Verifying Sectors... I 14:36:12 Device MD5: 8d9c7fa64b1508e3bffd7b859b1ddc49 I 14:36:12 Image MD5: 8d9c7fa64b1508e3bffd7b859b1ddc49 I 14:36:12 Operation Successfully Completed! - Duration: 00:11:28 I 14:36:12 Average Verify Rate: 10,749 KB/s (7.8x) - Maximum Verify Rate: 16,830 KB/s (12.2x) I 14:36:25 Close Request Acknowledged I 14:36:25 Closing Down... I 14:36:25 Shutting down SPTI... I 14:36:25 ImgBurn closed! Everything looked fine but the Xbox 360 wouldn't load the game up properly. I've got other backups that work on it. The book type is correct and the layer break is correct. Any ideas? Link to comment Share on other sites More sharing options...
dontasciime Posted May 4, 2007 Share Posted May 4, 2007 you can only verify the image you have is a working image, then burn again to same media in same drive or maybe if you have another writer try in that, as it should have worked providing the image is not corrupt and the verb you wrote to was not just a duff one. Link to comment Share on other sites More sharing options...
Recommended Posts